1. Home Security in a Box Prototypes April 17, 2008 Brad Forringer Travis Harkness Michael Hermeston Sachal Lakhavani Jensen Matlock

2. 11 Kiosk Prototypes Home Security

3. 22 Central Control Unit, Components and Signage Prototypes Protected by SECURITY Type 1 Control Unit Type 2 Control Unit

4. 33 Network and Connectivity Prototypes HON Call Center

5. 44 Installation and De-Installation Instructions Prototypes Installation Steps 1.Find and open the orange bag (A1) that contains the window sensors 2.Attach window sensors to each window by… 3.Find and open the red bag (A2) that contains the door sensors 4.Attach the door sensors to each door by… 5.Find and open the green bag (A3) that contains the motion detectors. 6.Setup the motion detectors in strategic locations throughout the home. Typically in dining rooms, top of stairs, main rooms, etc. 7.Find and open the black bag (A4) that contains the main control panel. 8.Find a convenient location, near an outlet, to place the central console and plug it in. 9.Once on, the system will welcome you and prompt you further instructions to compete the installation. 10.Once complete, you will be notified on the screen of the control panel and be shown a status of each sensor. 11.Done! De-Installation Steps 1.Turn the control panel off 2.At this point, it is safe to pull down all sensors without fear of setting off the system. Ideally, these would be provided more artistically (sample to be shown.) For example, we would like to mimic instructions used with products such as those found at Ikea and HP to ensure a very easy process.