Presentation is loading. Please wait.

Presentation is loading. Please wait.

RF-FOIL MOUNTING SCENARIO CHEMICAL ATTACK TOOLING PVC FLANGE - THE PVC FLANGE UPSIDE DOWN ON “TABLE”

Published byBuck Clark Modified over 9 years ago

Similar presentations

Presentation on theme: "RF-FOIL MOUNTING SCENARIO CHEMICAL ATTACK TOOLING PVC FLANGE - THE PVC FLANGE UPSIDE DOWN ON “TABLE”"— Presentation transcript:

1 RF-FOIL MOUNTING SCENARIO CHEMICAL ATTACK TOOLING PVC FLANGE - THE PVC FLANGE UPSIDE DOWN ON “TABLE”

2 RF-FOIL MOUNTING SCENARIO CHEMICAL ATTACK TOOLING O-RING - O-RING INSTALLATION ON THE PVC FLANGE PVC FLANGE

3 RF-FOIL MOUNTING SCENARIO CHEMICAL ATTACK TOOLING RF-FOIL BOX ON FLANGE JOINT BETWEEN FLANGE BOX AND PVC FLANGE - RF-FOIL BOX FIXED TO THE PVC FLANGE

4 RF-FOIL MOUNTING SCENARIO CHEMICAL ATTACK TOOLING RF-FOIL BOX ON FLANGE ASSEMBLY PVC “COOLING” BOX - RF-FOIL BOX AND FLANGE ASSEMBLY FIXED TO PVC “COOLING BOX

5 RF-FOIL MOUNTING SCENARIO CHEMICAL ATTACK TOOLING RF-FOIL FULLY EQUIPED ROTATIVE FRAME - RF-FOIL BOX FULLY EQUIPED FIXED TO THE ROTATIVE FRAME

6 RF-FOIL MOUNTING SCENARIO CHEMICAL ATTACK TOOLING - RF-FOIL BOX AND ROTATIVE FRAME FIXED TO CHARIOT RF-FOIL AND ROTATIVE FRAME BEARING CHARIOT

7 RF-FOIL MOUNTING SCENARIO CHEMICAL ATTACK TOOLING - RF-FOIL BOX AND CHARIOT INDEXING ON BEARING

Download ppt "RF-FOIL MOUNTING SCENARIO CHEMICAL ATTACK TOOLING PVC FLANGE - THE PVC FLANGE UPSIDE DOWN ON “TABLE”"

Similar presentations

ExoMars UV Laser diode thermal vacuum test Alex Rousseau.

ExoMars UV Laser diode thermal vacuum test Alex Rousseau.
Shaft movement - root cause of most rotating equipment failure Ability to seal, support shafts and increase reliability Used in thousands of applications.

Shaft movement - root cause of most rotating equipment failure Ability to seal, support shafts and increase reliability Used in thousands of applications.
1 ENGINEER EQUIPMENT INSTRUCTION COMPANY MULTI-PIECE RIM.

1 ENGINEER EQUIPMENT INSTRUCTION COMPANY MULTI-PIECE RIM.
C T A Camera Mechanics Rich Northrop University of Chicago 1 Design Review Argonne May 9, 2014 Final.

C T A Camera Mechanics Rich Northrop University of Chicago 1 Design Review Argonne May 9, 2014 Final.
Fixturing operations for PXL 1 models: MSC.SLDASM MSC_fixtured.SLDASM rail_test_system.SLDASM 2/24/2010.

Fixturing operations for PXL 1 models: MSC.SLDASM MSC_fixtured.SLDASM rail_test_system.SLDASM 2/24/2010.
Test Chamber Assembly, 1.5M Long (59.00”) Vacuum Tube, 4.00 OD x 3.50 ID Vacuum Tube, 3.75 OD x 3.51 ID 3.375” CFF, Non-Rotatable Feedthrough, Ceramtec.

Test Chamber Assembly, 1.5M Long (59.00”) Vacuum Tube, 4.00 OD x 3.50 ID Vacuum Tube, 3.75 OD x 3.51 ID 3.375” CFF, Non-Rotatable Feedthrough, Ceramtec.
1 Hose and Lines. 2 High side / low side System with an expansion valve High SideLow Side Condenser Evaporator Receiver/Drier Compressor Expansion valve.

1 Hose and Lines. 2 High side / low side System with an expansion valve High SideLow Side Condenser Evaporator Receiver/Drier Compressor Expansion valve.
AMS-02 tracker mechanics status of assembly and integration at UniGe Outer planes: - Tests of evaporator (cooling loop) integration - Tools to develop.

AMS-02 tracker mechanics status of assembly and integration at UniGe Outer planes: - Tests of evaporator (cooling loop) integration - Tools to develop.
AMS-02 tracker mechanics status of assembly and integration Inner tracker integration completion: - Assembly and cabling - Temperature and magnetic field.

AMS-02 tracker mechanics status of assembly and integration Inner tracker integration completion: - Assembly and cabling - Temperature and magnetic field.
Spectrometer Solenoid Fabrication Update Steve Virostek Lawrence Berkeley National Lab MICE CM23 at ICST, Harbin January 14, 2009.

Spectrometer Solenoid Fabrication Update Steve Virostek Lawrence Berkeley National Lab MICE CM23 at ICST, Harbin January 14, 2009.
Team HazardHawk Team HazardHawk 2008. The HazardHawk Team HazardHawk 2008.

Team HazardHawk Team HazardHawk The HazardHawk Team HazardHawk 2008.
Figure 18-1. Figure 18-1 part 1 Figure 18-1 part 2.

Figure Figure 18-1 part 1 Figure 18-1 part 2.
1 times table 2 times table 3 times table 4 times table 5 times table

1 times table 2 times table 3 times table 4 times table 5 times table
1 CNS/GSS/2008/M4 1 Module 4 Metal Enclosures – Various types.

1 CNS/GSS/2008/M4 1 Module 4 Metal Enclosures – Various types.
Twin-Frame Bicycle Chin, Hsu-Sheng Fan Chiang, Tsung-Lin Chin, Chih-Ching Movie 2 Button Movie 2 Button Movie 1 Button Movie.

Twin-Frame Bicycle Chin, Hsu-Sheng Fan Chiang, Tsung-Lin Chin, Chih-Ching Movie 2 Button Movie 2 Button Movie 1 Button Movie.
Electric Wiring Hardware Identification Electric Wiring Hardware Identification By Dave Wilson Information Technology and Communication Services ITCS Instructional.

Electric Wiring Hardware Identification Electric Wiring Hardware Identification By Dave Wilson Information Technology and Communication Services ITCS Instructional.
10/5/00LaBour Product1 LaBour Products  LVA / TFA  Self Priming  Classic  Taber.

10/5/00LaBour Product1 LaBour Products  LVA / TFA  Self Priming  Classic  Taber.
EE and SE Installation Wolfgang Funk - CERN CMS 11/9/20021 1.) Introduction 2.) Installation scenario 3.) SE schedule, manpower, cost estimates 4.) EE.

EE and SE Installation Wolfgang Funk - CERN CMS 11/9/ ) Introduction 2.) Installation scenario 3.) SE schedule, manpower, cost estimates 4.) EE.
C.R.ENGINEERING COLLEGE

C.R.ENGINEERING COLLEGE
SCU Segmented Cryostat Concept M. Leitner, S. Prestemon, D. Arbelaez, S. Myers September 2 nd, 2014.

SCU Segmented Cryostat Concept M. Leitner, S. Prestemon, D. Arbelaez, S. Myers September 2 nd, 2014.

Similar presentations

Ads by Google