Download presentation
Presentation is loading. Please wait.
Published byEmil Hopkins Modified over 9 years ago
1
BETHS PENCIL BOX
2
This is a pictures of my 250 mm piece of wood This is my piece of wood cut half way and I am about to chisel it!
3
This is me when I was using the routing machine and this is what it turned out like!!!
5
This is my box finished all it needs now is a coat of vanish Here it is varnished
6
THESE ARE THE TOOLS I USED
7
This is the marking gauge I used to mark where I wanted to chisel up to.
8
This is the saw that I used to cut with.
9
These are the goggles I used to protect my eyes.
10
These are the ear muffs I used to protect my ear drums.
11
These are the clamps I used so that my box would glue together.
12
This is the mallet I used to chisel with.
13
This is the putty I used to fill the holes with.
14
This is the varnish I used to make my box shiny
15
This is the pyro pen I used to burn patterns on my box
16
THE HAMMER AND NAILS I USED
17
This is the sand paper I used to make my box smooth.
18
This is the chisel I used.
19
This is the disc sander I used to make my box smooth and to round off the edges.
20
This is the plane I use to cut of edges.
21
This is the nail punch I used so the nails didn’t stick out.
22
BY BETH PRATT
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.