1. 1 You can create a report of points to stakeout with angle and distance from the occupied point. Points can be created for such items as end of embankment, inlet, outlet, auxiliary channel, project corners, etc. RADIAL STAKEOUT REPORT

2. 2 POINTS CREATE POINTS MANUAL ADD AS MANY POINTS NEEDED TO LAYOUT WITH DESCRIPTION AND ELEVATION

3. 3 6 Points were created to lay out the embankment location, elevation.

4. 4 POINTS STAKEOUT STAKEOUT SETTINGS Make sure Stakeout angle is Turned +

5. 5 POINTS STAKEOUT RADIAL POINT STAKEOUT

6. 6 ENTER A POINT OVER WHICH THE INSTRUMENT CAN BE SET. HERE IT WILL BE POINT #18. ENTER A POINT TO WHICH THE INSTRUMENT CAN BE SET AT ZERO. HERE IT WILL BE POINT #34.

7. 7 IN THIS DEMO NUMBERS 76-81 WILL BE USED. ENTER

8. 8 THIS IS THE REPORT THAT IS CREATED. HIGHLIGHT THE TEXT AND COPY IT TO A LAYOUT OR A WORD DOCUMENT AND CLEAN IT UP.

9. 9 DATA HERE HAS BEEN MADE USEABLE FOR DESIGN PURPOSES.