1. 1. One VMC Saved in Front Panel U121 Line Machine Saving Plan CNC Machine Shop Before After OSWAL ELECTRICALS-II Tapping M5 x 0.8 operation shifted on SPM Machine Tapping M5 x 0.8 operation were being on VMC Machine

2. 2. 2 nd VMC Saved in Front Panel U121 Line Machine Saving Plan CNC Machine Shop Before After OSWAL ELECTRICALS-II Pin Turning operation shifted on CNC Turning Machine Pin Turning operation were being on VMC Machine

3. 3. One Turning Centre To be Saved in Front Panel U121 Line Machine Saving Plan CNC Machine Shop Existing Proposed OSWAL ELECTRICALS-II 1. Combined grooving tool to be implemented 2. Combined facing tool to be implemented 1. Grooving Operation were being by single grooving insert. 2. Two faces were machining by separate two facing tools This Plan hold due to there is no customer requirement

4. 4. One VMC To be Saved in Cover Magneto U 90 Line Machine Saving Plan CNC Machine Shop Before After OSWAL ELECTRICALS-II Operation 30 drilling & tapping M10 X 1.5 shifted on SPM Operation 30 spot facing, drilling & tapping M10 X 1.5 were being on VMC In spot facing, surface finish not achieved on spm machine,so VMC can not saved but prod. Increased 400 to 750 per day