Download presentation
Presentation is loading. Please wait.
Published byMyra Cole Modified over 8 years ago
1
Current Electricity
2
Explore how a circuit works Follow the instructions on the handout to investigate how an electrical circuit works. You will find 2 ways to light the bulb and 2 2 ways that do not light the bulb. You will sketch the ways that work and the ways that do not work. You will use symbols to represent the parts of the circuit.
3
Parts of a Circuit Wire Bulb Battery Switch Symbols used for Diagramming
4
Objectives Explain how electrical energy is supplied to devices in a circuit. Use electrical symbols to draw simple circuit diagrams. Distinguish between open and closed circuits.
5
Which of these circuits will light? ABCD E FGHIJ Y NN N Y N N NY Y
9
The source of the electrons moving in the circuit is NOT the battery or the wall outlet! The free electrons are contained within the wire itself. An individual electron does not actually travel all the way around a circuit. One electron bumps into the next that bumps into the next that bumps into the next ….. It is the ENERGY that gets transferred all the way around the circuit. You buy energy, not electrons from the electric company!
10
Flow of Charge Charge flows when there is a potential difference (voltage).
11
Voltage pushes current like the force of water in a water tower due to its height pushes the water to flow from high to low. Current flows through wire/conductors like water flows through pipes.
13
Resistance to flow of electrons depends on the width and length of wire like water is restricted by the size of pipe
14
Current CURRENT: a flow of charged particles (electrons) through a conductor Current, I, is measured in amperes, A, or “amps”. Andre Ampere e-e- e-e- e-e- e-e- e-e- e-e- e-e- e-e-
15
Example: What is the current, I, if 8 C of charge passes through a wire in 2 seconds? I = q / t I = 4 amps
16
The Damage Caused by Electric Shock 1 mA = 0.001 A Mild shock can be felt 5 mA = 0.005 A Shock is painful 15 mA = 0.015 A Muscle control is lost 100 mA = 0.1 A Death can occur 60W light bulb - 0.5 A Starter motor – 210 A Clothes dryer – 18 A Iron- 3 A
17
Voltage, V SI unit is Volt, V Voltage is like electric “pressure” provided by batteries (dry cells, wet cells) and generators. Batteries provide energy from chemical reactions. Generators provide energy from the conversion of mechanical energy to electrical energy using rotating electromagnets.
18
Electrical Resistance, R SI unit is Ohm, Resistance in a conductor restricts the flow of charge in a conductor. It depends on the materials in the wire and the size/shape of the wire. Different conductors have different conductivity. Thick wires have less resistance than thin wires. Longer wires have more resistance than short wires.
20
Finding Current:What is the current through a 30 Ω resistance that has a potential difference of 120 V? Given: V = 120 V I = ? R = 30 Ω I = V/ R = 120 V/ 30 Ω = 4 A
21
Finding Voltage: How much voltage is required to make 2 amperes flow through a resistance of 8 ohms? Given: V = ? I = 2 A R = 8Ω V = I·R = 2A·8 Ω = 16 V V I R
22
Finding Resistance: Calculate the resistance of the filament in a light bulb that carries 0.4 A when 3.0 V is impressed across it. Given: V = 3.0 V I = 0.4 A R = ? R = V/ I = 3.0V ÷ 0.4A = 7.5Ω V I R
23
Click here and here to run here simulations of Ohm’s Law. Many circuit elements do not obey Ohm’s Law. Resistors that get hot, like light bulbs and heating elements, do not keep a constant resistance. Resistance generally increases as objects become hotter.
Similar presentations
© 2024 SlidePlayer.com. Inc.
All rights reserved.