1. J. Vanhove Projects bvba

2. Presentation of the Magic Pillow The solution for uncomfortable and cold spectator seats in football stadiums: The magic pillow. The warm air used to inflate it, acts during winter as an insulator. So you can enjoy the whole game on a nice and warm seat. And during the half time you let the air out of the magic pillow, so you can carry it in your pocket. The magic pillow can be used as well as headrest in a beach chair for example, or on the plane.

3. The production process STEP 4 Printing STEP 5 Drying STEP 6 Valve installation STEP 7 Joining the 2 sides STEP 8 Shaping STEP 9 Check End Finished product STEP 1 Base product STEP 2 Cut to size STEP 3 Valve opening

4. Step 1: The base product High tear resistance and adhesion water repellent Resistant to dilute acids and alkalis Heat resistant, temporarily up to +70° C Cold-resistant, after processing at room temperature (± 20 ° C) to - 20 ° C

5. Step 2: Cut to size PVC in any color desired.

6. Step 3: Opening for the valve Creation of the air opening for the inflation valve. Later in the production process, the inflation valve is installed.

7. Step 4: Printing The PVC that has been cut to size is being prepared for printing. Each piece is being dried manually and check for defects.

8. Step 4: Printing (continued) THE REAL WORK: PAINTING THE PVC

9. Step 4: printing (continued) Each color is applied separately. e.g. 4 colors = 4 times printing With the aid of a knife and a pressure bench, the printing is applied to the Magic Pillow.

11. Step 5: Drying

12. Step 6: Valve installation The main aspect of the Magic Pillow inflation valve: it’s security. Even not closed, the air already in the pillow, remains in the pillow. Workmanship and perfection are very important. Have a look at the text on the inflation valve.

13. Step 7: Joining the 2 sides Using pieces of PVC the 2 side are melted together.

14. Step 7: The result

15. Step 8: Shaping To cut Prepare Cutting Done

16. Step 9: Check Each Magic Pillow is being inflated to check for air leaks. The Magic Pillow is stored, inflated, for 24h. If after 24h, the Magic Pillow is still inflated, is passes Quality check.

17. End: The finished product

18. Quality of The Magic Pillow The only way to guarantee the quality of the product, is by doing the inspection at the factory myself and working close together with my contact person.

19. Realized projects

21. J. Vanhove Projects bvba Thank you for your attention