1. 2011 Users Conference
Nashville, TN

2. Distribution Automation
Product Line Overview

3. Topics Role of DA in Sensus Product Portfolio Sensus DA Endpoints
RTM II
T866
TC032
NaviComm
Software – PowerVista, SCADA-Xchange
Application Matrices
Product Roadmap

4. Sensus Solution Architecture
Metrology
Electric
Water
Gas
Head End Software
Communications Infrastructure
Home Area Networking and Load Control Modules
Distribution Automation

5. Sensus Distribution Automation
Distribution Automation (DA): Provides head end system and endpoints that enable a utility to remotely monitor, coordinate, and operate automation components in a real-time mode from remote locations.
DA Endpoints monitor/control field equipment
Information is reported to Host System using FlexNet or Cellular radios
Information is made available to utility user via a DA head end system or through the utility’s SCADA system
Commands/Requests can be sent at any time to the Endpoints
Interfaces to any 3rd party intelligent electronic devices that communicate via DNP3 or Modbus

6. DA Endpoints
Sensus DA products support a wide variety of automation applications
Endpoints supported by PowerVista DA head end software
Both FlexNet and Cellular versions available
RTM II – Intelligent Electronic Device Communications Module
T866 - MicroRTU
NaviComm – Fault Current Indicator Receiver
TC032 – Capacitor Bank Control
They can send data and event notifications over a private, secure FlexNet system or by using existing cellular systems.
PowerVista provides the communication network to detect, monitor, control, and make changes to the system remotely.

7. DA End-to-End System DA Endpoints
Sensus Communications and DA Head End
IED
PowerVista
Utility Users
DA Database
RNI – Regional Network Interface
Towers and FlexNet Base Stations
RTM II interface to IEDs, NaviComm, T866, TC032
SCADA-Xchange
SCADA

8. RTM II Overview
Remote Telemetry Module for interfacing to Intelligent Electronic Devices
Communication protocols:
DNP 3.0/IEEE 1815
Modbus
Radios: FlexNet, Cellular GSM, CDMA in development
Remote Firmware Update/Tunneling Capability
Three reporting methods:
Report by Exception
Time Scheduled
Response to Report Requests
IED Port
Pass Thru Port
IED Terminal
PC Port
DC Power
BOTTOM

9. RTM Interface Example RTM II mounted on inside of cabinet
RTM II power shares IED DC supply
SCADA connection for data monitoring and remote switch control
Pass Through for device configuration program
RTM II
DA Device Controller
Direct Pass Through
SCADA Connection

10. Cooper Form 6 Recloser Control
RTM II – How It Works
Programmed with a profile detailing the relevant points on the IED as well as how the user wants the data to be reported.
Constantly polls the IED to get the latest data.
When it discovers a reportable event, it initiates a report over the radio network to the DA head end
The data is validated, acknowledged, and processed for distribution to the end user.
Control and configuration information can be sent from the end user back to the IED as well.
RTM II
NOC
Cooper Form 6 Recloser Control
SEL651 Recloser Control
End User
IEDs

11. DA Configurator Software
Sensus DA Configuration software is used to:
Change configuration settings
Retrieve and view the present profile
Choose a different profile
Change communication settings
Check radio signal strength
Update firmware
The software includes default profiles for each supported integration.
Use a standard USB cable to connect the RTM II and the PC containing the DA Configuration software.

12. Example RTM II Configuration Screen

13. Recloser/Switch Control Case Study
1000+ devices
DNP-RTM & MicroRTU
Cooper 4C, F6 & ABB PCD 2000, Cleaveland Price
SCADA-Xchange
Benefits
Reduced SAIDI/MAIFI/CAIDI
Provides valuable data for planning and asset management
Reduced O&M cost
Support DNP & 2179 protocols

14. T866 MicroRTU Overview
Remote digital and analog monitoring and control
Features:
8 Digital Inputs
6 Digital Outputs
6 Analog Inputs (includes 2 AC detect)
Reports any momentary or continuing changes
Communication initiated by:
Automatic report upon status change
Time scheduled in advance
User-initiated report requests
Confidential

15. T866 MicroRTU Applications
A multi-channel I/O device suitable for general purpose usage in a wide variety of applications such as:
Electric circuit switch retrofit and control
Water and wastewater monitoring
Environmental monitoring
Distributed generator control
Irrigation control
Designed for indoor or outdoor environments
Dual power supply can operate from AC or optional DC power sources
Internal radio provides two-way communications to the PowerVista™ application suite

16. T866 Configuration Screen
Options
Signal Type
Scaling
Control Setup
Some reporting triggers

17. Water Control Case Study

18. Event Based Actions
Event Based Action Rules for Pump Control set up in PowerVista

19. NaviComm Overview
Self-Contained fault current indicator (FCI) receiver for PDP Smart Navigators
Speeds up crew response for overhead circuit fault location
Monitor up to12 FCIs
Reports
Fault magnitude
Fault duration
Load current
Peak Load Current
Provides data to utility SCADA via DNP3
Smart Navigator FCIs
NaviComm

20. NaviComm Installation
NaviComm mounted on pole with connection to control power.
PDP Smart Navigator fault current indicators mounted on overhead conductors.

21. TC032 Capacitor Control Overview
Cost effective solution for monitoring and control of switched and fixed capacitor banks
Local voltage and temperature switching strategies
Integrated communications
Neutral current monitoring option
Interface to either SCADA or Volt/VAR applications via SCADA-Xchange

22. Capacitor Control Case Study
TC032 Capacitor Control
Voltage/Temperature based control
Remote monitoring and operation capability
Neutral current monitoring for bank failure
Benefits
Improved reliability
Central control when required
Reduced O&M expenses
Deferred capital expenditures
Eliminated manual switching of seasonal banks
Better asset management

23. PowerVista The DA Head End software suite!
A Web-based application that provides tools to:
Interface to DA Endpoints
Monitor communications status
Device alarms and off-normal reporting
Manage user accounts and access
Can be hosted or deployed as an onsite solution.
Device List Page

24. T866 Point View Example View Status of: Digital Inputs Analog Inputs
Digital Outputs
Change Status (if user authorized)
Can also set up alarms and user notifications based on changes in status

25. DA Remote Telemetry Interface
SCADA-Xchange
Economical means of integrating Sensus’ control and data acquisition functionality with utility SCADA.
SCADA- Xchange server appears as DNP3 compliant virtual RTU to utility SCADA client.
Utility IT Systems
SCADA
DA Head-End
PowerVista
with
SCADA -Xchange
Base Stations
Secure Network
Secure Backhaul
Two-Way Radio
Intelligent Electronic Device
DA Remote Telemetry Module
DA Remote Telemetry Interface
DNP 3.0
DNP 3.0 Encapsulated into Data Packets
DNP 3.0 Encapsulated into TCP/IP

26. Electric DA Application Matrix
Description
Sensus DA Products
Recloser/Switch Monitoring and Control
Recloser/Switch status, remote recloser operation, DNP3 link for SCADA
RTM with kits/profiles available for common controllers
Capacitor Bank Monitoring and Control
Capacitor status , remote operation for volt/var control, DNP3 link for SCADA
Capacitor bank controller with embedded communications and neutral current monitoring
TC032 capacitor control
Voltage Regulation and Voltage Power Quality
Voltage regulator status and control, DNP3 link for SCADA
Pad Mount Switchgear Automation Upgrades
Remote operation of motor-controlled switch
MicroRTU
Remote access to switch intelligent controller
RTM
Fault indication to improve reliability or automated switching schemes
MicroRTU with fault sensors
Fault Indicators
Overhead line fault indication and load monitoring
NaviComm
Underground fault indication
MicroRTU interface for fault indicators

27. Water Automation Application Matrix
Monitor
Control
Product
Tank/Reservoir Level Monitor with Control
Level
Pressure
AC Power to pump
Pump
(may be separate or multiple)
T866 MicroRTU
Pump Monitor and Control
Flow
AC Power
Motorized valves
Lift Station Monitoring and Control
Level or level alarm
Meter SCADA
RTU + RTM Modbus
Remote PLC
Various analog, digital points
Various control outputs
RTM Modbus

28. DA Product Roadmap (1) RTM II+ PowerVista 3.x
Addition of Ethernet Port
FlexNet IP Support
3G Cellular IP
PowerVista 3.x
Improved user interface and report generation
RTM Ethernet and IP support
Remote endpoint configuration
Reduced latency and improved data compression
Water Automation Applications

29. DA Product Roadmap (2)
DA/AMI Convergence – Bellwether Meters for Volt/VAR Control
Bellwether voltage samples on dedicated FlexNet channel.
Bellwether meters user configurable for predefined report intervals (ex. 5 minutes).
Data routed via AMI head end to Volt/VAR control application.

30. QUESTIONS?