2. Arc Welding Equipment 6831.26

3. Welding Machines AC – (alternating current) used for most agricultural arc welding jobs and has low purchase cost compared to other arc welders

4. Welding Machines DC (direct current) are generator operated and can be used where regular electrical power is not available

5. Welding Machines AC/DC – welders use a rectifier to change regular AC current to DC These welders can be used as either AC or DC

6. Welding Machines TIG (tungsten inert gas) welders have an electric power unit, a pressure reducing regulator, electrode holder, tungsten electrode, nozzle, cables and hoses, and a gas supply unit

7. TIG The two gases used are helium and argon

8. TIG The tungsten electrode is not consumed (burned) and there is no slag on the bead

9. TIG TIG is good for welding stainless steel and aluminum because it is stronger and more free of corrosion than other welders

10. Welding Machines MIG (metallic inert gas) welders are wire feed welders that use a consumable wire fed automatically through the torch and can be used in industries as an automatic welder

11. Welding Equipment Helmet, leather gloves, leather aprons, leather welding jacket, and leather boots are for protection

12. Welding Equipment Chipping hammer removes slag, and wire brush removes rust and dirt

13. Welding Equipment Clamps and vise grip clamps are used to hold metal in place for welding

14. Electrodes Electrodes are wire cores or rods usually covered in flux

15. Electrodes Size is the diameter of the metal rod not including flux

16. Electrodes Classification code system has a letter and four numbers such as E6011 or E6013

17. Electrodes E6011 is the most commonly used electrode for welding farm projects because it can be used for all purpose welding of mild steel, has deep penetration, and can be used with both AC and DC welders

18. Electrodes E6013 is a good general purpose electrode but only has medium penetration

19. Arc Welder An electric arc welder is used to weld two pieces of metal by melting and joining the edges of each using an electrode to help fill the space between them

20. TIG Welder TIG welders are best for welding aluminum and stainless steel

21. MIG Welder MIG welders are the best welder for welding very thin metals

22. Shade 10 A shade 10 lens in a welding helmet protects the eyes of the person welding or the person watching someone weld

23. Chipping Hammer A chipping hammer is used to remove the slag (crust) off a welded bead

24. Arc Welding Equipment 6831.26