1. Uponor for Radiant Cooling Systems 102

3. Outline Fundamentals review FEA Analysis Case Studies Piping CCN Controls Web Link to Uponor DC Specifications Submittals Design Request Form

4. Fundamentals review Load – 12 to 14 Btuh/sqft, up to 32 Btuh/sqft Surface Temperature – 66 o F  67deg occupied, 65 unoccupied (ASHRAE 55 -2004) Average Water Temperature – 55 to 58 deg Dew Point – safety factor, keep water temperature 2 deg. Above dew point Spacing – 6 OC (max 9 OC) Loop Lengths – 300 - 350 ft for 5/8” Energy Equation – Btuh = 500 x gpm x dt Size of pipe – 5/8” typical Design differential temperatures  5 o F - 8 o F for cooling

5. FEA Analysis

6. Case Study Link Urban Outfitters HQ Uponor Radiant Heating /Cooling 53 Tons of Cooling 630 MBH of Heating Central Heating and Cooling Plant to Serve the Campus http://www.esmagazine.com/Articles/Cover_Story/BNP_GUID_9-5-2006_A_10000000000000178651

7. URBN - Building 543 Challenges North / south glass High clerestory glass Open mall area Humidity producers Large volumes Aesthetic demands

8. URBN - Building 543 Solutions Radiant heating and cooling slab Air side cooling for humidity control Draft barriers at occupied zones Vertical discharge diffusers

9. URBN – Slab details 53 tons of cooling 630 MBH of heating 14 manifolds, each with up to 10 loops at ~ 350 ft each loop Thermal breaks at radiant slab edge Embedded floor surface temperature sensors Space dew point sensors

10. URBN – Loop layout

12. URBN Solutions

14. Case Study Link Uponor Distribution Center Radiant Heating/Cooling AquaPEX Plumbing System 285,000 Sq Ft | LEED Silver Best in Real Estate Award 2009 http://twincities.bizjournals.com/twincities/stories/2009/04/20/focus17.html

15. Uponor DC - Challenges Office next to warehouse Floor to ceiling windows Cubicles Carpet Solar gain Lobby Pressurization problems

16. Uponor DC - Solutions Radiant heating and cooling slab Air side for latent, portion of sensible and ventilation load  RTU CCN controlling Radiant system and communicating with BAS system

17. Piping – Water temperature mixing

19. Piping – Mixing with htg / clg switch over

20. Piping – Primary (building) / Secondary Hot Water Chilled Water Primary Pump

21. CCN Controls – Zoning by pump A ( < 3 amp )

22. CCN Controls – Zoning by pump B ( > 3 amps)

23. CCN Controls – Zoning by valve with common pump (1 or 2 pumps)

24. CCN Controls – Zoning by thermal actuator on manifold

25. CCN Controls – Zoning

26. CCN – Zoning + water temperature control

28. CCN – Communication available to BAS CCN Thermostats  Mode  Temperatures – Operative – Slab – Humidity  All physical and software points – i.e. mixing valve position – Pump status – Supply and return temperatures

29. Specification

30. Submittals

31. Questions? Thank you