1. Steel Bumper Tooling Operations

2. STEEL BUMPER 1 2 3

3. Bumper Centre – Blanking Operation Blank Operation Feed Direction for Auto Feed Post Operation Coil

4. Bumper Centre – Draw Operation Single Action Draw Tool to full depth

5. Bumper Centre – Trim & Pierce Operation Trim and Pierce Tool Lip around aperture laid out ready for re-strike Bars for stability

6. Bumper Centre – Trim & Re-strike Operation Re-Strike and Trim Tool – (to tighten radii)

7. Bumper Centre – Trim & Pierce Operation Trim and Pierce Tool Cam Pierce (Lower Bumper Mounting Holes)

8. Bumper Outer – Blank (No Tool Required) Feed Direction for Auto Feed Post Operation Coil 1.Blank – No tool required straight off coil (guillotine)

9. Bumper Outer - Forming Operation 2.Forming Operation – Double attached Tool Single Action

10. Bumper Outer – Trim Cam Trim & Pierce operation 4.Trim / Cam Trim and Pierce Operation Cam Trim only if Flange Required

11. Bumper Outer – Re-Strike & Cam Flange Operation 5.Re-Strike and Cam Flange Operation (If Flange required)

12. 1) Price for a press tool which will produce a part of 1500mm x 500mm at a thickness of 2mm? 2)Find out the machine tonnage required? 3)Find out the cutting force?

13. Bumper Outer – Trim & Pierce Operation 3.Trim and Pierce Operation