1. 10 PRODUCT SPILLAGE SOLUTION

2. IMPACT BED

3. ADVANTAGES Protect belt and conveyor truss from impact and vibration. Ensures good spillage control. No replacing of idlers – dramatically reduces maintenance costs. The conveyor stays clean at the transfer point. No untimely breakdowns where idlers jump out and the belt gets ripped. Less down time – increases production. Improves belt tracking. Impact mounts to disperse energy. Proven in hostile environments. Easy to install and replace.

4. IMPACT BED RANGE PRICE The following information is needed in order to quote:

5. HIT SYSTEM

6. ADVANTAGES Heavy duty frame Impact absorbed in torsion bar Less impact on belt Longer belt life Longer idler life No bent or broken frames No modification to installation Uses standard SABS rollers H = HIGH I = IMPACT T = TORSION

7. HIT SYSTEM RANGE PRICE

8. IMPACT ZONE

9. ADVANTAGES A maintenance free anti-vibration mounting with active and passive isolation. Can accept compression, tension and shear loading as well as combined loadings. Can be installed in any desired position – ideal for ceiling and wall mounting. Due to the mechanically secured principal tearing off is not possible. Maintenance free, insensitive to water and dirt and suitable for temperatures from - 40°C to +80°C.

10. IMPACT ZONE RANGE PRICE

11. SKIRT CLAMP

12. ADVANTAGES Variable clamping force. No bolts / pins / wedges or toggles to loosen or adjust skirt rubber. Simple installation. Long service life. Reduced maintenance time and cost through simple, easy skirt adjustment – no special tools required! Utilizing the Neidhart System the skirt clamp ensures that positive pressure is always applied to the side wall. The Neidhart System allows for shock load absorption.

13. SKIRT CLAMP RANGE PRICE

14. SKIRT WING

15. ADVANTAGES Prevents belt from sagging. Improves belt life. Replaceable low friction, hard wearing liner. Built-in and adjustable suspension.

16. BIAS PLOUGH

17. ADVANTAGES Belt friendly – operates with the same venire self tensioning arm as our other scrapers. This ensures that the blades are kept at optimum cleaning tension and angle at all times. Shock load absorption. Blade tip is always in positive contact with conveyor. Neidhart Systems allows for long lifetime of equipment. Low cost of ownership. Components of Primary, Secondary and Bias scrapers are interchangeable.

18. BIAS PLOUGH RANGE PRICE

19. PRIMARY BELT SCRAPER

20. ADVANTAGES Robust design for heavy duty applications. Minimal installation space required. Can be utilized on reversible conveyor belts. Blade design assists material flow. Belt friendly. Shock load absorption. Components interchangeable with other scrapers in our range.

21. PRIMARY BELT SCRAPER RANGE PRICE

22. SECONDARY BELT SCRAPER

23. ADVANTAGES Low maintenance. Shock load absorption. Modular unit results in long overall life of equipment. Blade tip is always in positive contact with conveyor. Neidhart System allows for long lifetime in robust surroundings. Low cost of ownership. Components interchangeable with other scrapers in our range.

24. SECONDARY BELT SCRAPER RANGE PRICE

25. DUFF FEEDER

26. ADVANTAGES Collects and conveys duff from underneath belt scrapers, down to collection points. No more labour required at the transfer point due to effective conveying of the duff and or any spillage that may occur between the conveyor belt and transfer chute. Grease nipples mounted inside the covers to protect it from dust and ensure that no unauthorized person grease the motors. Operates for long maintenance free operation periods. Fit into a confined space.

27. DUFF FEEDER RANGE PRICE

28. CHUTE VIBRATORS

29. ADVANTAGES Increased through put. Less maintenance. Less personnel. Faster off loading. Increased production.

30. CHUTE VIBRATORS RANGE PRICE (GT’S)

31. CHUTE VIBRATORS RANGE PRICE (PISTON)

32. CHUTE VIBRATORS RANGE PRICE (VISAM)

33. CHUTE VIBRATORS RANGE PRICE (VISAM)

34. BUDGET SCRAPER

35. ADVANTAGES Low cost Easy installation Replaceable polyurethane blade Easily adjustable

36. 10 PRODUCT SPILLAGE SOLUTION