1. July 19, 2012 Anna Peisert1 CERN/Taiwan/Helsinki production center Work share Institutes/people Status of preparations

2. July 19, 2012Anna Peisert 2 Institutes/people CERN –Anna Peisert (0.4 FTE) –Stefano Mersi (0.4 FTE) –Mechanical technicians (~0.5 FTE or more, as needed) –Clean room technician (0.25 FTE) –Option to hire a doctoral student, if needed –Support from the bond lab of the Departmental Silicon Facility National Taiwan University –Rong-Shyang Lu (0.2 FTE  0.5 FTE from 2013) –Ulysses Grundler (0.3 FTE  0.5 FTE from 2013) –Xin Shi (0.5 FTE  1.0 FTE from 2013) Helsinki Institute of Physics –Jaakko Härkönen (.3 FTE) –Panja Luukka (0.4 FTE) –Esa Tuovinen (0.5 FTE) –Teppo Mäenpää (0.5 FTE) –Henri Moilanen (0.5 FTE) –Ivan Kassamakov (0.3 FTE) –Eija Tuominen (0.3 FTE) All participants have experience in detector construction/commissionning,running

3. July 19, 2012Anna Peisert Work share: construction of ~220 modules Work plan: At VTT: –UBM deposition –thinning ROC wafers –cutting ROC and pixel wafers At VTT by HIP technicians: –testing sensors after cutting At HIP: –testing bare modules –shipping to CERN At CERN: –Assembly with HDIs provided by Catania –Functional tests –Thermal cycling –X-rays tests and calibration –Storage

4. July 19, 2012Anna Peisert Equipment Test run at VTT foreseen for the end of the summer Assembly jigs –Will be produced when the final dimensions of the module are fixed Bare modules testing –Prototype probe card and jig developed by Pisa –Will be tested in August –Test run at VTT foreseen for the end of the summer will be tested outside Thermal cycling box –Mechanics assembled –Waiting for power supplies etc to finish the assembly, ~ September 2012 X-rays generator –Plan to buy a “didactic” one if qualified by Aachen 4