Download presentation
Presentation is loading. Please wait.
Published byMarcus Baldwin Modified over 8 years ago
1
How To Install a Centrifugal Water Pump
2
Installation Process First of all, consult the manual book to determine the right process of installation
3
Make Base Plate Inspection
4
Check the Pump Impeller, it can be turned by hand
5
If it cannot be turned, open the pump casing to look for obstructions
6
Turn the shaft clockwise by using a deep socket wrench on the Impeller nut
7
Open all the body parts of centrifugal pumps and clean them properly
8
Clean out any corrosion build up on the impeller Clean out any corrosion build up on the impeller
9
If necessary, coat the underside of the base plate to prevent the rust
10
Pump Installation Place Locate the pump near to the water source
11
Adequate Space For Operation, Inspection And Maintenance
12
Base Plate Pumps Foundation Grouted on a concrete foundation, which has been poured on a solid footing
13
Ensure Solid Foundation So that it will be able to absorb any vibration Able to provide a rigid and permanent support for the pumping Unit Use good quality suction hose that will not be collapsed by suction So that it will be able to absorb any vibration Able to provide a rigid and permanent support for the pumping Unit Use good quality suction hose that will not be collapsed by suction
14
Check all fittings and connections in the suction line for tightness
15
Tools Required For Installation Hammer Worm gear saw with diamond blade Rebar cutters Concrete mixer Concrete vibrator Lifting device Hand tools Chipping hammer Pressure washer Epoxy adhesive Rebar tie wire
16
Correct Installation and Maintenance of a Centrifugal Pump Ensure Trouble Free Service
17
Visit www.pumpkart.com to buy Pumps online and take guidance on their installation and Maintenancewww.pumpkart.com
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.