1. Fabric Arts I Photo Transfer Pillow

2. Steps 1 & 2 Pin your “A” strips to your “C” strips with face sides together.

3. ¼” Foot Use a ¼” foot when sewing your strips together. Make sure the right edge of your fabric is lined up with the right edge of the presser foot using the black edge as a guide.

4. Step 3 After sewing the A strips to your C strip, use the iron to press the seams toward the darker color.

5. Step 4 Pin & sew your D-6 ½” strip to your “A-C-A” square. Face sides together & press.

6. Step 5 & 6 Pin & sew white square fabric to your D-6 ½” strip. Face sides together. Press the seam towards the “D” strip.

7. Step 7 Pin & sew your D- 14 ½” strip to the bottom. Press towards darker fabric.

8. Step 8 Pin the two squares face sides together with the white squares opposite of each other. Make sure the middle two D- 6 ½” vertical pieces are lined up.

9. Step 8 Press seams and make the vertical pieces D strips are lined up.

10. Step 12 Pin & sew E strips to your squares with face sides together. Match the top edges together. The strips should be too long and hanging off the bottom.

11. Step 12 & 13 Trim E strips to match the sides of the bottom piece.

12. Step 13 Outcome

13. Step 14 Pin & sew B 3”x 3” squares to each side of the 2 E strips. Face sides together.

14. Step 15 Pin the E strips to the edges of the square. Match and pin the seams first then pin the rest of the strip.

15. Step 15 & 16 Pin & sew the E strips

16. Step 16 Finished Top Make sure to press your top nice and flat with seams facing towards darker fabric.