1. By: Chandramohan S. Jha Class :- 7 th EE Roll no :- 26.

2. Circuit Breakers Definition “ Mechanical switching devices capable of making, carrying and breaking currents under normal and abnormal ”

3. Circuit breakers Elements MMain Contact IInsulation between main contacts

4. Types of Circuit breakers AAir-Blast Circuit breaker OOil Circuit Breakers  SF6 Circuit breakers  Vacuum Circuit Breakers

5. Principles of Operation MMoving contact made of copper rod  Fixed contact made of spring-loaded copper segments to exert pressure on moving contact and to make good contact

6. Circuit Breakers Requirements  Opens & closes in shortest possible time  Conducts rated current. WWithstands thermally & mechanically any short circuit.

7. DDoes not create over voltages during circuit opening  Easy to maintain. NNot very expensive CONTINUE…

8. Principles of Operation OOn opening moving contact moves rapidly.  An electric Arc is formed. TThe intensity of the arc depends on the current been interrupted.

9. TThe gas in the chamber sweeps the arc which is cooled.  Circuit opening is achieved if the arc does not re-ignite

10. Oil Circuit breaker HHeat from the arc breaks some oil to form gases mostly hydrogen. TThe high pressure of the gas blows out the arc CCold oil flows onto the arc which is extinguished.  Used in low and medium voltages up to 110 kV.

12. Air-Blast Circuit breaker  Air is compressed in reservoir up to 14 atmospheric pressure.  The compressed air is released and directed towards the arc at high velocity  The arc is then extinguished  Used for 110 kV and above

14. SF6 Circuit breaker SSulfur Hexa Flouride (SF6) gas is used under pressure. IIt has high electric strength and outstanding arc quenching characteristics. IIt is an electro-negative gas. It means that the free electrons are attracted to the gas and are not free to move to sustain the arc.

15. SF6 Circuit breaker SSF6 Breakers are smaller than air-blast breakers. TTemperature of up to 30,000 K are experienced in breakers. SSF6 breakers are used from low voltage system and up to 1300 kV

17. Vacuum Circuit breaker IInterruption chamber is vacuumed. NNo gas which is ionized to form the arc. AAn arc is formed from the vaporized contact material. TThe choice of the contact material is crucial

19. Vacuum Circuit breaker VVery small damage to contacts (life up to 30 years).  Small mechanical energy required for tripping. WWidely used in low voltage applications

20. References:- PPower system by:V.K.Mehta  E Electrical Power System by: C.L.WADHWA SS.G.P.D. by: S. S.Rao

21. Thank You…..