1. Dave Yao Vice President of Worldwide Sales
Introduction
Dave Yao
Vice President of Worldwide Sales

2. Cambrios Technologies Corp. Leader in Transparent Conductors
ClearOhm Sensor Supply Chain
ClearOhm Inks
Coated Film
Touch Sensor Maker
ODM’s
Founded in 2002 by scientists at MIT and University of California, Santa Barbara
Design and manufacturing in Sunnyvale, CA with offices in Japan and Taiwan
Strategic investors including Nissha Printing, Toray and Samsung
Strong IP Portfolio: >175 pending patent applications, >22 issued or allowed patents
Phones, AIO’s and Monitors with Cambrios technology based touch commercially available in the market

3. Changing Requirements for Transparent Conductors
Difficult to achieve with ITO
Higher Conductivity
Ability to conform to bends and curves
Flexibility
Lower Cost

4. Transparent Conductors: Alternatives to ITO
Metal Mesh
CNTs and Nanobuds
Conducting Polymers
Graphene
Silver Nanowires

5. Other ITO Replacement Technologies Cannot Beat ClearOhmTM

6. Silver Nanowires Pros Cons High conductivity High transparency
Inexpensive and easy to use
Commercially used in many products
Well established and growing supply chain
Cons
Increased haze < 30 ohms/sq
Useful in some high-conductivity applications
Plan View
70 degree tilt

7. Enabling Pro-Cap touch Panels for Ultrabook and Monitors
2/21/12

8. Improved Manufacturing Yields
ClearOhm™ is not brittle like ITO
Improved yields during bonding (no cracking)
flexible and curved form factors
2/21/12

9. Touch Panel Supply Chain Ready for Production (Announced Relationships)
ClearOhm™ Inks
Cambrios
Film Makers
Okura, Hitachi Chem, Toray, DIC, ShinEtsu
LGE, Shinwha, and other Korean suppliers
China and US based suppliers
Sensor Makers
eTurboTouch
LGE
Nissha Printing
CNi
ShinEtsu
Others

10. Products Using ClearOhm™ Technology
15” Point Of Sale Monitor
23” Monitors/AIOs
13.3” Intel Reference Design
Low cost AND high performance
Invisible patterns, even in sunlight
Glass sensor like appearance

11. Advantages of ClearOhm Touch Sensors
FF sensor mm even for 27” sensor
OGS on Gorilla Glass adds <0.05mm
Lower cost than ITO
Cost advantage increases with size
Platform Designs
92% compared to 90% for ITO OGS sensor
Brighter displays
Longer battery life
Invisible patterns & no moiré patterns
Higher Conductivity than ITO on film
Enables laptop and AiO/monitor touch panels
Faster Response
Higher Transmission
Thinner, Lighter, Stronger
Cost Effective
Animated radial list with picture
Select the SmartArt graphic on the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.
(Intermediate)
Also on the Animations tab, in the Timing group, do the following:
In the Start list, select With Previous.
To reproduce the SmartArt effects on this slide, do the following:
In the Duration box, enter 1.00 seconds.
On the Home tab, in the Slides group, click Layout, and then click Blank.
Also on the Animations tab, in the Animation group, click Effect Options, and then click One by One.
On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List, and then click OK to insert the graphic into the slide.
Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow to expand the contents of the list.
In the Animation Pane, select the first effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Grow & Turn.
To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes.
In the Animation Pane, select the second effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic.
Press and hold CTRL, and on the slide, select the large circle and all three small circles.
In the Start list, select After Previous.
In the Speed list, select 0.50 seconds.
On the Home tab, in the Drawing group, click the arrow to the right of Shape Effects, point to Preset, and under Presets and select Preset 2 (first row, the second option from the left).
Also on the Animations tab, in the Animation group, click Effect Options, and then click From Left.
In the Animation Pane, select the third effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
On the slide, click on the picture icon in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane check Tile picture as texture. (2) If necessary, change the tile position of the picture within the shape. To do this, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Offset X and Offset Y boxes to reposition the focal point of the picture. To resize the picture, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.)
In the Duration box, enter 1.00 second.
In the Animation Pane, select the fourth effect in the list (fade entrance effect). On the Animations tab, in the Timing group, in the Start list, select With Previous.
Press and hold CTRL, and in the Animation Pane, select the fifth and eighth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe.
Also on the Animations tab, in the Timing group, in the Duration box, enter 0.50 seconds.
Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gray-25%, Background 2, Darker 75% (fifth row, the third option from the left).
Press and hold CTRL, and in the Animation Pane, select the sixth and ninth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom.
Also on the Animation tab, in the Timing group, do the following:
Select the middle small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gold, Accent 2 (first row, the sixth option from the left).
In the Duration list, select 0.50 seconds.
Press and hold CTRL, and in the Animation Pane, select the seventh and tenth effects in the list (fade entrance effects). On the Animations tab, in the Timing group, in the Start list select After Previous.
Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Lavender, Accent 3 (first row, the seventh option from the left).
To reproduce the background effects on this slide, do the following:
Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
In the Type list, select Radial.
Click the button next to Direction, and then click From Center (third option from the left).
Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, do the following:
Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.
Also under Gradient stops, customize the gradient stops that you added as follows:
Click Line Color in the left pane, and in the Line Color pane click Solid line.
Select the first stop in the slider, and then do the following:
Also in the Line Color pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left).
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left).
Click Line Style in the left pane, and in the Line Style pane, in the Width box enter 2.5 pt.
Also in the Line Style pane, in the Dash type list select Round Dot (second option from the top).
Select the last stop on the slider, and then do the following:
Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the Font Size box enter 22 pt.
In the Position box, enter 100%.
Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 35% (fifth row, first option from the left).
To reproduce the animation effects on this slide, do the following:

12. Reducing Sensor Cost: Lower Process & Material Cost
Lower Coating Cost
High Speed Roll to Roll Solution Coating
Lower Patterning Cost
Laser Patterning
Hitachi Chemical TCTF:
Integrated Resist/OCA/nanowire
Lower Stack Cost
Touch on Plastic Lens
GF1/GF2 structure
eliminate OCA

13. Managing Touch Screen Designs
Different Mesh Film and Sensor for each Display
1080p p p

14. Managing Touch Screen Designs
Different Mesh Film and Sensor for each Display
1080p p p
Same Film and Sensor for each Display
1080p p p
Silver nanowires enable platform designs

15. Platform Design for Lower Cost
Lower Design Cost
Lower Testing & Integration Cost
Lower Inventory/Supplier Management Cost

16. Case Study: Hitachi Chemical Transparent Conductive Transparent Film (TCTF)

17. Enabling Innvoative New Film Products
5 µm thick photo-patternable transparent conducting layer that can be laminated to any substrate
Hitachi Dry Resist +
Cambrios ClearOhm™ Technology =
Cover film
Base film (PET film)

18. Enabling Touch Using TCTF
Low temperature lamination
Compatible with film substrates or strengthened glass (Gorilla Glass)
Only add 5um per sensor layer
Excellent transmission and color (low b*)
Sheet or Cell process
More cost effective process than ITO
Y-Electrode
X-Electrode
100µｍ
TCTF Lamination
X-Electrode Formation
TCTF Lamination
And Y-Electrode Formation
Photosensitive Layer
Conductive Layer
Substrate
10µm

19. Traditional ITO Touch Sensor
Dielectric
Deposit
Layer
Resist
Formation
Patterning
Etching
Stripping

20. Fabrication Using Transfer Film
Substrate
TCT Film
Lamination
Patterning
TCT Film
Lamination
Patterning
Transfer film process uses 1/3 the steps as traditional ITO sensor

21. Cambrios ClearOhm™: Enabling Emerging Applications and Markets

22. Large Emerging Markets
3D TV’s
Flexible Displays
OLED Displays/Lighting
Solar Cells
Automotive

23. Flexible and Formable Devices
Resistance change in Bending Test R 3mm
Resistance (Ohms)
# of test Times (“round trip”)
Courtesy AUO
Data Courtesy Nissha Printing

24. OLED Value Proposition
High conductivity in single material – no need for grids
Same or better efficiency as ITO
Lifetimes similar to ITO
No angle dependence of color
R2R manufacturing for lighting
10cm x 10 cm ClearOhm OLED Tile

25. Flexible and Transparent OPV
Roll to roll cells using ClearOhm demonstrated
World record for organic photovoltaics
12% efficiency
Production facility under construction
Image courtesy: Heliatek

26. Summary
Cambrios Silver Nanowires are enabling and accelerating the adoption of touch
Cost effective and high performance
Numerous products on the market
Robust supply chain with rapidly expanding capacity
Enabling a new world of applications, form factors, and design flexibility
Effective transparent electrode for OLEDs, OPV and other applications
A big THANK YOU to our customers for adopting Cambrios technology

27. For further information:
Web: