1. Using the M1 to Control PulseWorx UPB Lighting

2. Type your question in the Questions box of the GoToWebinar Control Panel on the right side of your screen – We will get to as many questions as we can during the webinar – Any unanswered questions will be addressed in the follow-up email

3. Leading designer and provider of personalized security, energy conservation management and convenience solutions Established in 1993, located in Hildebran, NC – Founded by Veteran Team of Industry Pioneers Known for innovative and superior quality products backed by industry leading technical support and warranties

4. Scott Klodowski – Director of Sales and Marketing – 30 Years experience in PLC Lighting Controls – Also a Techie – Loves Sailing

5. A US Manufacturer and Engineering company of Lighting Controls since 1992 – Celebrating our 19 th Anniversary of experience, we know lighting control, it is our passion and focus. – First to introduce Powerline based “scene” lighting controls. – Inventors of the patented UPB Technology and leading experts since it was introduced in 1999 – Developers of UPStart™ Configuration Software UPB programming software

6. What’s with all the names designs and manufactures the, designs and manufactures the, brand, of Lighting Controls which uses,... brand, of Lighting Controls which uses,... Universal Powerline Bus technology. Universal Powerline Bus technology. PCS systems have the benefits of being hard-wired without the need for the installation of any additional new wiring. PCS systems have the benefits of being hard-wired without the need for the installation of any additional new wiring. UPB is the accepted high-performance standard for devices that communicate over the existing powerlines. UPB is the accepted high-performance standard for devices that communicate over the existing powerlines. Our Systems are “Wiredless” Our Systems are “Wiredless”

7. What is UPB? Universal Powerline Bus is a patented communication standard that uses the electrical wiring in a home. – Introduced 12 years ago in 1999 – Has since become the Industry Standard of professional installers for powerline-based communication – 9 Licensee’s & 100’s of Partners

8. How Does UPB Work? Pulse Position Modulation (PPM) – Data is encoded by positioning pulses at certain windows (points on the electrical sine wave) – Like a Cannon Shot Strong signal travels great distance – MINIMUM of 40Vpp - Can be as strong as 70Vpp – Up to 1000 linear feet Low frequency signal (4khz - 40khz) – like a Subwoofer – Signals travels better with less attenuation and far fewer errors Two-way communication – ensures ultra-reliability, acknowledging commands

9. KPCD-6KPCW-6WS1DLM-1OCMFMD/R 120V Part 1 Transmitters Keypads - Interfaces Part 2 Receivers Load Control Modules PIM E

10. Security, Fire, Access Control, Lighting, HVAC, Energy & Task Management Provides scheduled automation of virtually anything electrical in a home or business Pleasing voice announces system status onsite and provides voice message alerts to the consumer via phone Can be controlled over the internet & provide email alerts to the consumer User Interfaces include Touchscreen & LCD keypads, arming stations, tablets, smart phones, PCs, and phones

11. Provides Convenience, Energy Savings, Safety & Security – Control lighting based on occupancy, arm state, time of day, light/dark outside, and more Ease of Installation & Integration Flexibility & Scalability Great for Retrofit or New Construction

12. M1 Gold Control M1XSP PIM-R The M1XSP connects to the PIM-R with a standard serial sable The M1XSP connects to the M1 data bus The Old Way

13. M1PCSPIM (PIM-E) The M1PCSPIM (PIM-E) is an all-in-one device providing an easy, permanent connection from the M1 Control to the UPB network. Connects directly to the M1 Data Bus Note: Cannot be used with UPStart Software M1 Gold Control The New Way

14. Device Configuration also known as Editing / Defining Options and Programming

15. Adding Devices – Two Ways to Add Device to Config File – On Line – Off Line Single Device Add – We use the Single Device method

16. Device Found This step finds and reads the devices configuration Operation Successful Click OK

17. Defining a Device Type Room Name – PW Demo Type Device Name – Left Dimmer Unit ID is automatic – Can be adjusted – Make sure you NEVER have two items with the same Unit ID MAKE SURE THE ERASE EXISTING CONFIGURATION IS CHECKED!!!! If you do not Erase Existing Configuration, the factory default links will be added to UPStart, Links 1-6 and 8

18. Device Added & Defined – NOT YOU This step writes the information to the device – Room Name – Device Name – Network ID – Unit ID Operation Successful Click OK

19. Programming Summary The device has now been added It will show – Manufacturer – Product type – Network Name – Name of device Click Done

20. Display Pane Device appears in the Display Pane Design Pane – Displays – Rooms – Links – Schedules If TEC is added Display Pane

21. Off Line Add Device Must disconnect from PIM Add Device – Wizard shows up – Select Device you want – Room & Device Name – Summary

22. Device Configuration also known as Editing / Defining Options and Programming

23. WS1D - Options A wide Varity of OPTIONS can be set in our switch – ID Tab (Unit ID, Room Name) – Rocker Switch (Manual Function) – Options – Receive Components (Scenes) – Transmit Components (Broadcast Links) – Advanced (Received Sensitivity Adjustment) – Test – Communication Test (Two Way Communication Test)

24. KPC6 - Options A wide Varity of OPTIONS can be set in this device – ID – Options – Keypad TX – Indicators – Advanced – Test – Communication Test

25. There are 4 ways to Add or Modify Links – Use the Manual Link Editor “MLE” Edit on the Transmit and Receive tabs of each device – Use the Visual Link Editor “VLE” Graphical drag and drop based tool – Use the Dialog Link Editor “DLE” Select from menu Network – Link Names – Use the Link Builder

26. UPStart Demo of Creating and Modifying Links or Scenes

33. The Network ID can be found on the Network Properties screen in UPStart The Network ID found in UPStart should be programmed in ElkRP on the Globals screen on the G29-G42 (Special) tab

34. VERY IMPORTANT!

35. Turn all lights off when the M1 system is armed to Away mode.

36. Turn on several lights 15 minutes after sunset

37. Only turn the light on if it is dark outside

38. Turn closet light on for 10 minutes when closet door opens. Turn closet light off when closet door closes.

40. Turn light off when room is no longer occupied

43. Q & A Session

44. Thanks for Attending! All of us at ELK and PCS appreciate your time. We look forward to working with you in the future. www.pulseworx.com (888) 701-9831 www.elkproducts.com (800) 797-9355