1. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart1 of 122 C HAPTER 12 The Production Cycle

2. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart2 of 122 INTRODUCTION Questions to be addressed in this chapter include: –What are the basic business activities and data processing operations that are performed in the production cycle? –What decisions need to be made in the production cycle, and what information is needed to make these decisions? –How can the company’s cost accounting system help in achieving the entity’s objectives? –What are the major threats in the production cycle and the controls that can mitigate those threats?

3. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart3 of 122 INTRODUCTION The production cycle is a recurring set of business activities and related data processing operations associated with the manufacture of products.

4. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart4 of 122 INTRODUCTION Information flows to the production cycle from other cycles, e.g.: –The revenue cycle provides information on customer orders and sales forecasts for use in planning production and inventory levels. –The expenditure cycle provides information about raw materials acquisitions and overhead costs. –The human resources/payroll cycle provides information about labor costs and availability.

5. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart5 of 122 INTRODUCTION Information also flows from the expenditure cycle: –The revenue cycle receives information from the production cycle about finished goods available for sale. –The expenditure cycle receives information about raw materials needs. –The human resources/payroll cycle receives information about labor needs. –The general ledger and reporting system receives information about cost of goods manufactured.

6. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart6 of 122 INTRODUCTION Decisions that must be made in the production cycle include: –What mix of products should be produced? –How should products be priced? –How should resources be allocated? –How should costs be managed and performance evaluated? These decisions require cost data well beyond that required for external financial statements.

7. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart7 of 122 INTRODUCTION We’ll be looking at how the three basic AIS functions are carried out in the production cycle, i.e.: –How do we capture and process data? –How do we store and organize the data for decisions? –How do we provide controls to safeguard resources, including data?

8. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart8 of 122 PRODUCTION CYCLE ACTIVITIES The four basic activities in the production cycle are: –Product design –Planning and scheduling –Production operations –Cost accounting Accountants are primarily involved in the fourth activity (cost accounting) but must understand the other processes well enough to design an AIS that provides needed information and supports these activities.

9. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart9 of 122 PRODUCTION CYCLE ACTIVITIES The four basic activities in the production cycle are: –Product design –Planning and scheduling –Production operations –Cost accounting Accountants are primarily involved in the fourth activity (cost accounting) but must understand the other processes well enough to design an AIS that provides needed information and supports these activities.

10. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart10 of 122 PRODUCT DESIGN The objective of product design is to design a product that strikes the optimal balance of: –Meeting customer requirements for quality, durability, and functionality; and –Minimizing production costs. Simulation software can improve the efficiency and effectiveness of product design.

11. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart11 of 122 PRODUCT DESIGN Key documents and forms in product design: –Bill of Materials: Lists the components that are required to build each product, including part numbers, descriptions,and quantity. –Operations List: Lists the sequence of steps required to produce each product, including the equipment needed and the amount of time required.

12. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart12 of 122 PRODUCT DESIGN Role of the accountant in product design: –Participate in the design, because 65−80% of product cost is determined at this stage. –Add value by: Designing an AIS that measures and collects the needed data. Information about current component usage. Information about machine set-up and materials- handling costs. Data on repair and warranty costs to aid in future modification and design.

13. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart13 of 122 PRODUCT DESIGN Role of the accountant in product design: –Participate in the design, because 65−80% of product cost is determined at this stage. –Add value by: Designing an AIS that measures and collects the needed data. Helping the design team use that data to improve profitability. Compare current component usage with projected usage in alternate designs. Compare current set-up and handling costs to projected costs in alternate designs. Provide info on how design trade-offs affect total production cost and profitability.

14. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart14 of 122 PRODUCTION CYCLE ACTIVITIES The four basic activities in the production cycle are: –Product design –Planning and scheduling –Production operations –Cost accounting Accountants are primarily involved in the fourth activity (cost accounting) but must understand the other processes well enough to design an AIS that provides needed information and supports these activities.

15. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart15 of 122 PLANNING AND SCHEDULING The objective of the planning and scheduling activity is to develop a production plan that is efficient enough to meet existing orders and anticipated shorter-term demand while minimizing inventories of both raw materials and finished goods.

16. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart16 of 122 PLANNING AND SCHEDULING There are two common approaches to production planning: –Manufacturing Resource Planning (MRP-II) –Lean Manufacturing

17. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart17 of 122 PLANNING AND SCHEDULING There are two common approaches to production planning: –Manufacturing Resource Planning (MRP-II) –Lean Manufacturing

18. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart18 of 122 PLANNING AND SCHEDULING MRP-II is an extension of MRP inventory control systems: –Seeks to balance existing production capacity and raw materials needs to meet forecasted sales demands. –Often referred to as push manufacturing.

19. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart19 of 122 PLANNING AND SCHEDULING There are two common approaches to production planning: –Manufacturing Resource Planning (MRP-II) –Lean Manufacturing

20. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart20 of 122 PLANNING AND SCHEDULING Lean manufacturing is an extension of the principles of just-in-time inventory systems: –Seeks to minimize or eliminate inventories of raw materials, work in process, and finished goods. –Theoretically, produces only in response to customer orders, but in reality, there are short-run production plans. –Often referred to as pull manufacturing.

21. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart21 of 122 PLANNING AND SCHEDULING Comparison of the two systems: –Both plan production in advance. –They differ in the length of the planning horizon. MRP-II develops plans for up to 12 months ahead. Lean manufacturing uses shorter planning horizons. –Consequently: MRP-II is more appropriate for products with predictable demand and a long life cycle. Lean manufacturing more appropriate for products with unpredictable demand, short life cycles, and frequent markdowns of excess inventory.

22. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart22 of 122 PLANNING AND SCHEDULING Key documents and forms: –Master production schedule Specifies how much of each product is to be produced during the period and when. Uses information about customer orders, sales forecasts, and finished goods inventory levels to determine production levels. Although plans can be modified, production plans must be frozen a few weeks in advance to provide time to procure needed materials and labor. Scheduling becomes significantly more complex as the number of factories increases. Raw materials needs are determined by exploding the bill of materials to determine amount needed for current production. These amounts are compared to available levels to determine amounts to be purchased.

23. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart23 of 122 PLANNING AND SCHEDULING Key documents and forms: –Master production schedule –Production order Authorizes production of a specified quantity of a product. It lists: –Operations to be performed –Quantity to be produced –Location for delivery Also collects data about these activities,

24. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart24 of 122 PLANNING AND SCHEDULING Key documents and forms: –Master production schedule –Production order –Materials requisition Authorizes movement of the needed materials from the storeroom to the factory floor. This document indicates: –Production order number –Date of issue –Part numbers and quantities of raw materials needed (based on data in bill of materials)

25. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart25 of 122 PLANNING AND SCHEDULING Key documents and forms: –Master production schedule –Production order –Materials requisition –Move ticket Documents the transfer of parts and materials throughout the factory.

26. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart26 of 122 PLANNING AND SCHEDULING How can information technology help? –Improve the efficiency of material-handling activities by using: Bar coding of materials to improve speed and accuracy, RFID tags can eliminate human intervention in the scanning process, Up to 40 times faster than using bar-code scanners. Not impeded by dirt. Not limited to reading only those items in line of sight. Much easier to locate needed products and broadcast their location to forklift operators or other warehouse workers.

27. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart27 of 122 PLANNING AND SCHEDULING Role of the accountant: –Ensure the AIS collects and reports costs in a manner consistent with the company’s production planning techniques.

28. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart28 of 122 PRODUCTION CYCLE ACTIVITIES The four basic activities in the production cycle are: –Product design –Planning and scheduling –Production operations –Cost accounting Accountants are primarily involved in the fourth activity (cost accounting) but must understand the other processes well enough to design an AIS that provides needed information and supports these activities.

29. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart29 of 122 PRODUCTION OPERATIONS Production operations vary greatly across companies, depending on the type of product and the degree of automation. The use of various forms of IT, such as robots and computer-controlled machinery is called computer-integrated manufacturing (CIM). –Can significantly reduce production costs. Accountants aren’t experts on CIM, but they must understand how it affects the AIS. –One effect is a shift from mass production to custom- order manufacturing and the need to accumulate costs accordingly.

30. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart30 of 122 PRODUCTION OPERATIONS In a lean manufacturing environment, a customer order triggers several actions: –System first checks inventory on hand for sufficiency. –Calculates labor needs and determines whether overtime or temporary help will be needed. –Based on bill of materials, determines what components need to be ordered. Necessary purchase orders are sent via EDI. –The master production schedule is adjusted to include the new order.

31. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart31 of 122 PRODUCTION OPERATIONS Sharing information across cycles helps companies be more efficient by timing purchases to meet the actual demand. Although the nature of production processes and the extent of CIM vary, all companies need data on: –Raw materials used –Labor hours expended –Machine operations performed –Other manufacturing overhead costs incurred

32. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart32 of 122 PRODUCTION CYCLE ACTIVITIES The four basic activities in the production cycle are: –Product design –Planning and scheduling –Production operations –Cost accounting Accountants are primarily involved in the fourth activity (cost accounting) but must understand the other processes well enough to design an AIS that provides needed information and supports these activities.

33. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart33 of 122 COST ACCOUNTING The objectives of cost accounting are: –To provide information for planning, controlling, and evaluating the performance of production operations; –To provide accurate cost data about products for use in pricing and product mix decisions; and –To collect and process information used to calculate inventory and COGS values for the financial statements.

34. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart34 of 122 COST ACCOUNTING The objectives of cost accounting are: –To provide information for planning, controlling, and evaluating the performance of production operations; –To provide accurate cost data about products for use in pricing and product mix decisions; and –To collect and process information used to calculate inventory and COGS values for the financial statements. To accomplish the first objective, the AIS must collect real-time data on the performance of production activities so management can make timely decisions. RFID technology can be especially helpful, e.g.: –Broadcasting repair needs proactively. –Helping in the location of particular items.

35. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart35 of 122 COST ACCOUNTING The objectives of cost accounting are: –To provide information for planning, controlling, and evaluating the performance of production operations; –To provide accurate cost data about products for use in pricing and product mix decisions; and –To collect and process information used to calculate inventory and COGS values for the financial statements. To accomplish the second and third objectives, the AIS must collect costs by various categories and assign them to specific products and organizational units. Requires careful coding of cost data during collection because costs may be allocated in different ways for different reporting purposes.

36. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart36 of 122 COST ACCOUNTING Types of cost accounting systems: –Job order costing Assigns costs to a specific production batch or job. Used when the product or service consists of discretely identifiable items. Example: Houses.

37. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart37 of 122 COST ACCOUNTING Types of cost accounting systems: –Job order costing –Process costing Assigns costs to each process or work center in the production cycle. Calculates the average cost for all units produced. Used when similar goods or services are produced in mass quantities and discrete units can’t be easily identified. Example: Paint.

38. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart38 of 122 COST ACCOUNTING Accounting for fixed assets: –The AIS must collect and process information about the property, plant, and equipment used in the production cycle. –These assets represent a significant portion of total assets for many companies and need to be monitored as an investment.

39. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart39 of 122 COST ACCOUNTING The following information should be maintained about each fixed asset: ID number Serial number Location Cost Acquisition date Vendor info Expected life Expected salvage value Depreciation method Accumulated depreciation Improvements Maintenance performed

40. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart40 of 122 COST ACCOUNTING The purchase of fixed assets follows the same processes as other purchases in the expenditure cycle (order  receive  pay). But the amounts involved necessitate some modification to the process: –Competitive bidding Machinery and equipment purchases almost always involve a formal request for competitive bids.

41. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart41 of 122 COST ACCOUNTING The purchase of fixed assets follows the same processes as other purchases in the expenditure cycle (order  receive  pay). But the amounts involved necessitate some modification to the process: –Competitive bidding –Number of people involved More people are likely to be involved in reviewing bids for fixed assets.

42. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart42 of 122 COST ACCOUNTING The purchase of fixed assets follows the same processes as other purchases in the expenditure cycle (order  receive  pay). But the amounts involved necessitate some modification to the process: –Competitive bidding –Number of people involved –Payment Purchases of fixed assets are often paid for in installments, including interest.

43. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart43 of 122 COST ACCOUNTING The purchase of fixed assets follows the same processes as other purchases in the expenditure cycle (order  receive  pay). But the amounts involved necessitate some modification to the process: –Competitive bidding –Number of people involved –Payment –Controls The cost of fixed assets justifies more elaborate controls to safeguard them, including: –Maintenance of detailed records of each item. –RFID tags to: Monitor location Facilitate preventive maintenance

44. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart44 of 122 COST ACCOUNTING The purchase of fixed assets follows the same processes as other purchases in the expenditure cycle (order  receive  pay). But the amounts involved necessitate some modification to the process: –Competitive bidding –Number of people involved –Payment –Controls –Disposal It’s critical to formally approve and accurately record the sale or disposal of fixed assets.

45. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart45 of 122 COST ACCOUNTING A typical AIS would look something like the following: –Product design Engineering specifications result in new records for both the bill of materials and the operations list file. To create these lists, engineering accesses both files to view designs of similar products. They also access the general ledger and inventory files for info about alternate designs.

46. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart46 of 122 COST ACCOUNTING A typical AIS would look something like the following: –Product design –Production planning The sales department enters sales forecasts and customer special order information. Production planning uses that information and data on current inventory levels to develop a master production schedule. New records are added to the production order file to authorize the production of goods.

47. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart47 of 122 COST ACCOUNTING A typical AIS would look something like the following: –Product design –Production planning –Cost accounting New records are added to the work-in-process file to accumulate cost data.

48. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart48 of 122 COST ACCOUNTING A typical AIS would look something like the following: –Product design –Production planning –Cost accounting –Production operations The list of operations to be performed is displayed at workstations. Instructions are also sent to the CIM interface to guide operation of machinery and robots. Materials requisitions are sent to inventory stores to authorize release of raw materials to production.

49. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart49 of 122 COST ACCOUNTING Such a system can be used for a job-order or process costing system. Both require that data be accumulated about: –Raw materials –Direct labor –Machinery and equipment usage –Manufacturing overhead The choice of method: –Does not affect how data are collected –Does affect how costs are assigned to products

50. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart50 of 122 COST ACCOUNTING Raw material usage data: –When production is initiated, the issuance of a materials requisition triggers a debit (increase) to work in process and a credit (decrease) to raw materials inventory. –Work in process is credited and raw materials are debited for any amounts returned to inventory. –Many raw materials are bar coded so that usage data is collected by scanning. –RFID tags improve the efficiency of tracking material usage. –Usage may be entered online for materials such as liquids that are not conducive to tagging.

51. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart51 of 122 COST ACCOUNTING Direct labor costs: –Historically, job time tickets were used to record the time a worker spent on each job task. –Currently, workers may: Enter the data on online terminals. Use coded ID badges, which are run through a badge reader at the beginning and end of each job.

52. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart52 of 122 COST ACCOUNTING Machinery and equipment usage: –Machinery costs make up an ever-increasing proportion of production costs. –Data about machinery and equipment are collected at each production step, often with data about labor costs. –Until recently, data was collected by wiring the factory so all equipment was linked to the computer system. Limits the ability to rearrange the shop floor. –3-D simulations can be used to assess the impact of altering floor layout.

53. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart53 of 122 COST ACCOUNTING Manufacturing overhead costs: –Includes costs that can’t be easily traced to jobs or processes, such as utilities, depreciation, supervisory salaries. –Most of these costs are collected in the expenditure cycle. –An exception is supervisory salaries, which are collected in the HRM/payroll cycle.

54. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart54 of 122 COST ACCOUNTING –Accountants help control overhead by assessing how product mix changes will affect overhead costs. –They should also identify the factors that drive the changes in these costs. This information can be used to realign processes and layout. –Accurate and complete information about production cycle activities are required to perform these analyses.

55. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart55 of 122 CONTROL: OBJECTIVES, THREATS, AND PROCEDURES In the production cycle (or any cycle), a well-designed AIS should provide adequate controls to ensure that the following objectives are met: –All transactions are properly authorized. –All recorded transactions are valid. –All valid and authorized transactions are recorded. –All transactions are recorded accurately. –Assets are safeguarded from loss or theft. –Business activities are performed efficiently and effectively. –The company is in compliance with all applicable laws and regulations. –All disclosures are full and fair.

56. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart56 of 122 CONTROL: OBJECTIVES, THREATS, AND PROCEDURES There are several actions a company can take with respect to any cycle to reduce threats of errors or irregularities. These include: –Using simple, easy-to-complete documents with clear instructions (enhances accuracy and reliability). –Using appropriate application controls, such as validity checks and field checks (enhances accuracy and reliability). –Providing space on forms to record who completed and who reviewed the form (encourages proper authorizations and accountability).

57. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart57 of 122 CONTROL: OBJECTIVES, THREATS, AND PROCEDURES –Pre-numbering documents (encourages recording of valid and only valid transactions). –Restricting access to blank documents (reduces risk of unauthorized transaction). –Using RFID tags when feasible to improve data entry accuracy. In the following sections, we’ll discuss the threats that may arise in the four major steps of the production cycle, as well as general threats, EDI-related threats, and threats related to purchases of services.

58. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart58 of 122 THREATS IN PRODUCT DESIGN The major threats in the product design process is: –THREAT 1: Poor product designTHREAT 1: Poor product design You can click on the threat above to get more information on: –The types of problems posed by each threat. –The controls that can mitigate the threat.

59. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart59 of 122 THREATS IN PRODUCT DESIGN THREAT NO. 1—Poor product design –Why is this a problem? Higher materials purchasing and carrying costs. Costs for inefficient production. Higher repair and warranty costs. –Controls: Accurate data about the relationship between components and finished goods. Analysis of warranty and repair costs to identify primary causes of product failure to be used in re- designing product. Return to Threat Menu Return to Threat Menu Go to Next Threat Go to Next Threat

60. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart60 of 122 THREATS IN PLANNING AND SCHEDULING Threats in the planning and scheduling process include: –THREAT 2: Over- or under-productionTHREAT 2: Over- or under-production –THREAT 3: Suboptimal investment in fixed assetsTHREAT 3: Suboptimal investment in fixed assets You can click on any of the threats above to get more information on: –The types of problems posed by each threat –The controls that can mitigate the threats.

61. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart61 of 122 THREATS IN PLANNING AND SCHEDULING THREAT NO. 2—Over- or under-production –Why is this a problem? Over-production may result in: –Excess goods for short-run demand and potential cash flow problems. –Obsolete inventory. Under-production may result in: –Lost sales. –Customer dissatisfaction.

62. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart62 of 122 THREATS IN PLANNING AND SCHEDULING –Controls: More accurate production planning, including accurate and current: –Sales forecasts –Inventory data Investments in production planning. Regular collection of data on production performance to adjust production schedule. Proper authorization of production orders. Restriction of access to production scheduling program. Validity checks on production orders. Return to Threat Menu Return to Threat Menu Go to Next Threat Go to Next Threat

63. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart63 of 122 THREATS IN PLANNING AND SCHEDULING THREAT NO. 3—Suboptimal investment in fixed assets –Why is this a problem? Over-investment causes excess costs. Under-investment impairs productivity. –Controls: Proper authorization of fixed asset transactions: –Larger purchases should be reviewed by a senior executive or executive committee. –Smaller purchases (<$10,000) can be handled with departmental budgets, with managers being held responsible for department return.

64. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart64 of 122 THREATS IN PLANNING AND SCHEDULING –Competitive bids should be sought via requests for proposals (RFPs). »The capital investment committee should review and select the winning bid. –Once a supplier is selected, acquisition may be handled through the expenditure cycle process. Return to Threat Menu Return to Threat Menu Go to Next Threat Go to Next Threat

65. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart65 of 122 THREATS IN PRODUCTION OPERATIONS Threats in the production operations process include: –THREAT 4: Theft of inventories and fixed assetsTHREAT 4: Theft of inventories and fixed assets –THREAT 5: Disruption of operationsTHREAT 5: Disruption of operations You can click on any of the threats above to get more information on: –The types of problems posed by each threat. –The controls that can mitigate the threats.

66. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart66 of 122 THREATS IN PRODUCTION OPERATIONS THREAT NO. 4—Theft of inventories and fixed assets –Why is this a problem? Loss of assets. Misstated financial data. Potential underproduction of inventory. –Controls: Physical access to inventory should be restricted. All internal movement of inventory should be documented.

67. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart67 of 122 THREATS IN PRODUCTION OPERATIONS Materials requisitions should be used to authorize release of raw materials. –Should be signed by both inventory control clerk and production employee to establish accountability. Requests in excess of the bill of materials should be documented and have supervisory authorization. RFID tags and bar codes can be used to track inventory through production.

68. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart68 of 122 THREATS IN PRODUCTION OPERATIONS Proper segregation of duties should be enforced: –Inventory stores has custody of raw materials and finished goods. –Factory supervisors are responsible for work in process. –Authorization of production orders, materials requisitions, and move tickets, should be done by production planners or the information system. Logical and physical access controls should be enforced for production records. An independent party should count inventory and investigate discrepancies. Fixed assets must be identified and recorded.

69. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart69 of 122 THREATS IN PRODUCTION OPERATIONS Managers should be held accountable for assets under their control. Fixed assets should be physically secured. Disposal of assets should be authorized and documented. Periodic reports of fixed asset transactions should be reviewed by the controller. Adequate insurance should be maintained. Return to Threat Menu Return to Threat Menu Go to Next Threat Go to Next Threat

70. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart70 of 122 THREATS IN PRODUCTION OPERATIONS THREAT NO. 5—Disruption of operations –Why is this a problem? Disasters can disrupt functioning and destroy assets –Controls: Backup power sources, such as generators and uninterruptible power supplies. Investigate disaster preparedness of key suppliers and identify alternative sources for critical components. Return to Threat Menu Return to Threat Menu Go to Next Threat Go to Next Threat

71. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart71 of 122 THREATS IN COST ACCOUNTING Threats in the cost accounting process include: –THREAT 6: Inaccurate recording and processing of production activity dataTHREAT 6: Inaccurate recording and processing of production activity data You can click on the threat above to get more information on: –The types of problems posed by the threat. –The controls that can mitigate the threat.

72. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart72 of 122 THREATS IN COST ACCOUNTING THREAT 6—Inaccurate recording and processing of production activity data –Why is this a problem? Diminishes effectiveness of production scheduling. Undermines management’s ability to monitor and control operations. –Controls: Automate data collection with RFID technology, bar code scanners, and badge readers to ensure accurate data entry.

73. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart73 of 122 THREATS IN COST ACCOUNTING Use online terminals for data entry. Restrict access with passwords, user IDs, and access control matrices to prevent unauthorized changes to data. Use check digits, closed-loop verification, and validity checks. Do periodic physical counts of inventory and compare to records. Do periodic inspections and counts of fixed assets. Return to Threat Menu Return to Threat Menu Go to Next Threat Go to Next Threat

74. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart74 of 122 GENERAL THREATS Two general objectives pertain to activities in every cycle: –Accurate data should be available when needed. –Activities should be performed efficiently and effectively. Threats in the process of ordering goods include: –THREAT 7: Loss, alteration, or unauthorized disclosure of dataTHREAT 7: Loss, alteration, or unauthorized disclosure of data –THREAT 8: Poor performanceTHREAT 8: Poor performance You can click on any of the threats below to get more information on: –The types of problems posed by each threat. –The controls that can mitigate the threats.

75. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart75 of 122 GENERAL THREATS THREAT NO. 7: Loss, alteration, or unauthorized disclosure of data –Why is this a problem? Loss or alteration of data could cause: –Errors in external or internal reporting. Unauthorized disclosure of confidential information can cause: –Unfair competition –Loss of business

76. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart76 of 122 GENERAL THREATS Controls: –All data files and key master files should be backed up regularly. At least one backup on site and one offsite. –All disks and tapes should have external and internal file labels to reduce chance of accidentally erasing important data. –Promptly, remove all access rights of employees who quit or are fired

77. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart77 of 122 GENERAL THREATS –Access controls should be utilized: User IDs and passwords. Compatibility matrices. Controls for individual terminals (e.g., so the receiving dock can’t enter a sales order). Logs of all activities, particularly those requiring specific authorizations, should be maintained. –Default settings on ERP systems usually allow users far too much access to data, so these systems must be modified to enforce proper segregation of duties.

78. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart78 of 122 GENERAL THREATS –Sensitive data should be encrypted in storage and in transmission. –Parity checks, acknowledgment messages, and control totals should be used to ensure transmission accuracy. Return to Threat Menu Return to Threat Menu Go to Next Threat Go to Next Threat

79. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart79 of 122 GENERAL THREATS THREAT NO. 8—Poor performance –Why is this a problem? Quality control problems increase expenses and reduce future sales. –Controls: Prepare and review performance reports. Return to Threat Menu Return to Threat Menu Go to Next Threat Go to Next Threat

80. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart80 of 122 PRODUCTION CYCLE INFORMATION NEEDS In a manufacturing environment, the focus must be on total quality management. Managers need info on: –Defect rates –Breakdown frequency –Percent of finished goods needing rework –Percent of defects discovered by customers

81. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart81 of 122 PRODUCTION CYCLE INFORMATION NEEDS In traditional systems, this type of data was not well linked with financial data, and cost accounting systems were separate from production operations information systems. However, both financial and operating information are needed to manage and evaluate these activities.

82. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart82 of 122 PRODUCTION CYCLE INFORMATION NEEDS Two major criticisms have been directed at traditional cost accounting systems: –Overhead costs are inappropriately allocated to products. –Reports do not accurately reflect effects of factory automation.

83. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart83 of 122 PRODUCTION CYCLE INFORMATION NEEDS Two major criticisms have been directed at traditional cost accounting systems: –Overhead costs are inappropriately allocated to products. –Reports do not accurately reflect effects of factory automation.

84. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart84 of 122 CRITICISM 1: INAPPROPRIATE ALLOCATION OF OVERHEAD COSTS Traditional cost accounting systems use volume-driven bases such as direct labor hours or machine hours to apply overhead. However, overhead does not vary with production volume. EXAMPLE: Purchasing costs vary with the number of purchase orders processed.

85. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart85 of 122 CRITICISM 1: INAPPROPRIATE ALLOCATION OF OVERHEAD COSTS Allocating overhead based on output volume: –Overstates the costs of products manufactured in large quantities. –Understates the costs of products manufactured in small batches. Also, allocating overhead based on direct labor input can distort costs.

86. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart86 of 122 CRITICISM 1: INAPPROPRIATE ALLOCATION OF OVERHEAD COSTS Example of two products: –Product one uses: $5 of materials 1 hour of labor 5 minutes of machine time –Product two uses: $5 of materials 1 hour of labor 42 hours of machine time on very expensive equipment

87. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart87 of 122 CRITICISM 1: INAPPROPRIATE ALLOCATION OF OVERHEAD COSTS Example of two products: –Product one uses: $5 of materials 1 hour of labor 5 minutes of machine time –Product two uses: $5 of materials 1 hour of labor 42 hours of machine time on very expensive equipment Under a traditional cost accounting system, both products will appear to have the same cost.

88. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart88 of 122 CRITICISM 1: INAPPROPRIATE ALLOCATION OF OVERHEAD COSTS Solution to criticism 1: Activity Based Costing (ABC) –ABC can refine and improve cost allocations under either job-order or process costing systems. ABC traces costs to the activities that create them and allocates them accordingly. ABC aims to link costs to corporate strategy.

89. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart89 of 122 CRITICISM 1: INAPPROPRIATE ALLOCATION OF OVERHEAD COSTS –Corporate strategy results in decisions about what goods and services to produce. These activities incur costs. So corporate strategy determines costs. –By measuring the costs of the basic activities, ABC provides information to management for evaluating the consequences of their decisions.

90. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart90 of 122 CRITICISM 1: INAPPROPRIATE ALLOCATION OF OVERHEAD COSTS ABC vs. traditional cost systems: –There are three significant differences between ABC and traditional approaches. Tracing of overhead costs Number of cost pools Identification of cost drivers

91. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart91 of 122 CRITICISM 1: INAPPROPRIATE ALLOCATION OF OVERHEAD COSTS ABC vs. traditional cost systems: –There are three significant differences between ABC and traditional cost accounting approaches. Tracing of overhead costs Number of cost pools Identification of cost drivers

92. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart92 of 122 CRITICISM 1: INAPPROPRIATE ALLOCATION OF OVERHEAD COSTS ABC directly traces a larger proportion of overhead costs to products. This tracing is made possible by advances in IT.

93. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart93 of 122 CRITICISM 1: INAPPROPRIATE ALLOCATION OF OVERHEAD COSTS ABC vs. traditional cost systems: –There are three significant differences between ABC and traditional cost accounting approaches. Tracing of overhead costs Number of cost pools Identification of cost drivers

94. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart94 of 122 CRITICISM 1: INAPPROPRIATE ALLOCATION OF OVERHEAD COSTS ABC uses a greater number of cost pools to accumulate indirect costs (manufacturing overhead). Most systems lump all overhead together, but ABC distinguishes three categories: -Batch-related overhead EXAMPLES: Setup, inspection, and material handling costs. Accumulated for a batch and allocated to the products in that batch. Consequently, costs per product will be less when products are made in larger quantities.

95. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart95 of 122 CRITICISM 1: INAPPROPRIATE ALLOCATION OF OVERHEAD COSTS ABC uses a greater number of cost pools to accumulate indirect costs (manufacturing overhead). Most systems lump all overhead together, but ABC distinguishes three categories: -Batch-related overhead -Product-related overhead Examples: R&D, environmental regulations, and purchasing costs. These costs are related to the diversity of the company’s product line. ABC attempts to link these costs to the products that generate them. For example, purchasing costs might be allocated to products based on the number of purchase orders generated for each product.

96. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart96 of 122 CRITICISM 1: INAPPROPRIATE ALLOCATION OF OVERHEAD COSTS ABC uses a greater number of cost pools to accumulate indirect costs (manufacturing overhead). Most systems lump all overhead together, but ABC distinguishes three categories: -Batch-related overhead -Product-related overhead -Company-wide overhead EXAMPLE: Rent or depreciation. These costs are applied to all products and allocated according to departmental or plant rates.

97. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart97 of 122 CRITICISM 1: INAPPROPRIATE ALLOCATION OF OVERHEAD COSTS ABC vs. traditional cost systems: –There are three significant differences between ABC and traditional cost accounting approaches. Tracing of overhead costs Number of cost pools Identification of cost drivers

98. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart98 of 122 CRITICISM 1: INAPPROPRIATE ALLOCATION OF OVERHEAD COSTS Benefits of ABC systems –ABC systems are more costly and complex. –But proponents argue two important benefits: More accurate cost data result in better product mix and pricing decisions. More detailed cost data improve management’s ability to control and manage total costs.

99. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart99 of 122 CRITICISM 1: INAPPROPRIATE ALLOCATION OF OVERHEAD COSTS Benefits of ABC systems –ABC systems are more costly and complex. –But proponents argue two important benefits: More accurate cost data result in better product mix and pricing decisions More detailed cost data improve management’s ability to control and manage total costs.

100. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart100 of 122 CRITICISM 1: INAPPROPRIATE ALLOCATION OF OVERHEAD COSTS Better decisions –ABC avoids problems of applying too much or too little overhead to products and consequently results in better price decisions. –ABC uses the data collected to improve product design. –ABC provides management with the information about the costs associated with specific activities, resulting in better analysis and decisions.

101. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart101 of 122 CRITICISM 1: INAPPROPRIATE ALLOCATION OF OVERHEAD COSTS Benefits of ABC systems –ABC systems are more costly and complex. –But proponents argue two important benefits: More accurate cost data result in better product mix and pricing decisions. More detailed cost data improve management’s ability to control and manage total costs.

102. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart102 of 122 CRITICISM 1: INAPPROPRIATE ALLOCATION OF OVERHEAD COSTS Improved cost management –ABC measures the results of managerial actions on overall profitability. –ABC measures both the amount spent to acquire resources and the amount spent to consume them. –ABC measures unused capacity: Cost of activity capability = Cost of activity used + Cost of unused capacity

103. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart103 of 122 CRITICISM 1: INAPPROPRIATE ALLOCATION OF OVERHEAD COSTS EXAMPLE: A publishing company has five employees who operate printing presses. The employees each have annual salaries of $25,000 for a total salary cost of $125,000. Each employee should be able to print about 10,000 books per year. The total capacity, therefore is 50,000 books. The salary cost per book would be $125,000 / 50,000 books = $2.50 per book. During the most recent year, the presses produced 47,000 books.

104. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart104 of 122 CRITICISM 1: INAPPROPRIATE ALLOCATION OF OVERHEAD COSTS EXAMPLE: A publishing company has five employees who operate printing presses. The employees each have annual salaries of $25,000 for a total salary cost of $125,000. Each employee should be able to print about 10,000 books per year. The total capacity, therefore is 50,000 books. The salary cost per book would be $125,000 / 50,000 books = $2.50 per book. During the most recent year, the presses produced 47,000 books. The cost of the activity capability is the total book capacity for the year of 50,000 books times the salary cost per book of $2.50. 50,000 books x $2.50 = $125,000.

105. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart105 of 122 CRITICISM 1: INAPPROPRIATE ALLOCATION OF OVERHEAD COSTS EXAMPLE: A publishing company has five employees who operate printing presses. The employees each have annual salaries of $25,000 for a total salary cost of $125,000. Each employee should be able to print about 10,000 books per year. The total capacity, therefore is 50,000 books. The salary cost per book would be $125,000 / 50,000 books = $2.50 per book. During the most recent year, the presses produced 47,000 books. The cost of the activity used is the number of books actually produced times the salary cost per book of $2.50. 47,000 books x $2.50 = $117,500.

106. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart106 of 122 CRITICISM 1: INAPPROPRIATE ALLOCATION OF OVERHEAD COSTS EXAMPLE: A publishing company has five employees who operate printing presses. The employees each have annual salaries of $25,000 for a total salary cost of $125,000. Each employee should be able to print about 10,000 books per year. The total capacity, therefore is 50,000 books. The salary cost per book would be $125,000 / 50,000 books = $2.50 per book. During the most recent year, the presses produced 47,000 books. The unused capacity is the difference between the activity capability ($125,000) and the cost of the activity used ($117,500). $125,000 - $117,500 = $7,500 unused capacity. Alternately, unused capacity can be calculated as the cost per book of $2.50 times the difference between the books that could be produced and the books that were actually produced. $2.50 x (50,000 possible books – 47,000 actual books) = $7,500 unused capacity.

107. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart107 of 122 CRITICISM 1: INAPPROPRIATE ALLOCATION OF OVERHEAD COSTS Management may be able to improve profitability by: -Applying the unused capacity to other revenue-generating activities; or -Eliminating the unused capacity.

108. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart108 of 122 PRODUCTION CYCLE INFORMATION NEEDS Two major criticisms have been directed at traditional cost accounting systems: –Overhead costs are inappropriately allocated to products. –Reports do not accurately reflect effects of factory automation.

109. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart109 of 122 CRITICISM 2: REPORTS DO NOT ACCURATELY REFLECT EFFECTS OF AUTOMATION When an organization transitions from a traditional production system to a lean manufacturing system, inventory levels are depleted. Consequently, almost all production costs of the year are expensed that year. Although the effect is temporary, managers will be concerned if their performance evaluations are based on the company’s reported financial statements.

110. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart110 of 122 CRITICISM 2: REPORTS DO NOT ACCURATELY REFLECT EFFECTS OF AUTOMATION Solution to criticism two: Better reports and measures –Produce reports based on lean accounting principles. Report for each product all costs incurred to design, produce, sell, deliver, process customer payments, and provide post-sale support for that product. Separate overhead costs from COGS. Identify changes in inventory levels as a separate expense item.

111. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart111 of 122 CRITICISM 2: REPORTS DO NOT ACCURATELY REFLECT EFFECTS OF AUTOMATION Solution to criticism two: Better reports and measures –Produce reports based on lean accounting principles. –Develop resources to focus on issues important to production cycle managers. Examples: –Useable output produced per time period. –Monitoring of product quality.

112. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart112 of 122 THROUGHPUT: A MEASURE OF PRODUCTION EFFECTIVENESS Throughput = Productive Capacity x Productive Processing Time x Yield –Productive Capacity = Total Units Produced / Processing Time Can be improved by: –Improving machine or labor efficiency. –Improving factory layout. –Simplifying product design specifications.

113. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart113 of 122 THROUGHPUT: A MEASURE OF PRODUCTION EFFECTIVENESS Throughput = Productive Capacity x Productive Processing Time x Yield –Productive Capacity = Total Units Produced / Processing Time –Productive Processing Time = Processing Time / Total Time The opposite of downtime. Can be improved by: –Better maintenance to reduce machine downtime. –Better scheduling of deliveries to reduce wait time.

114. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart114 of 122 THROUGHPUT: A MEASURE OF PRODUCTION EFFECTIVENESS Throughput = Productive Capacity x Productive Processing Time x Yield –Productive Capacity = Total Units Produced / Processing Time –Productive Processing Time = Processing Time / Total Time –Yield = Good Units / Total Units Can be improved by: –Using better raw materials. –Improving worker skills.

115. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart115 of 122 THROUGHPUT: A MEASURE OF PRODUCTION EFFECTIVENESS Throughput = Productive Capacity x Productive Processing Time x Yield –Productive Capacity = Total Units Produced / Processing Time –Productive Processing Time = Processing Time / Total Time –Yield = Good Units / Total Units EXAMPLE: Manster Co. produced 1,000 bottles of Zithmowash in a 10-hour period. During this period there was a total of 1 hour of machine downtime and waiting time for materials. One hundred of the bottles were defective. –PRODUCTIVE CAPACITY = 1,000 bottles / 9 productive hours = 111.11 bottles / hour. –PRODUCTIVE PROCESSING TIME = 9 productive hours / 10 total hours =.90. –YIELD = 900 good units / 1,000 total units =.90 –THROUGHPUT = 111.11 x.90 x.90 = 90

116. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart116 of 122 QUALITY CONTROL Information about quality control –Quality control costs can be divided into four categories : Prevention costs Costs incurred to reduce product defect rates.

117. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart117 of 122 QUALITY CONTROL Information about quality control –Quality control costs can be divided into four categories : Prevention costs Inspection costs Costs incurred to ensure products meet quality standards.

118. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart118 of 122 QUALITY CONTROL Information about quality control –Quality control costs can be divided into four categories : Prevention costs Inspection costs Internal failure costs Costs of rework and scrap when products are identified as defective prior to sale.

119. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart119 of 122 QUALITY CONTROL Information about quality control –Quality control costs can be divided into four categories : Prevention costs Inspection costs Internal failure costs External failure costs Costs when defective products are sold to customers, e.g., warranty and repair costs, product liability costs, costs of customer dissatisfaction, and damage to reputation.

120. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart120 of 122 QUALITY CONTROL Information about quality control –Quality control costs can be divided into four categories : Prevention costs Inspection costs Internal failure costs External failure costs –The objective of quality control is to minimize the sum of these four costs. Some companies have found that the most important management decision involves switching from the traditional "management by exception" philosophy to a "continuous improvement" viewpoint. Continuous improvement focuses on comparing actual performance to the ideal (i.e., perfection).

121. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart121 of 122 SUMMARY You’ve learned about the basic business activities and data processing operations that are performed in the production cycle, including: –Product design –Production planning and scheduling –Production operations –Cost accounting You’ve learned how IT can improve the efficiency and effectiveness of these processes.

122. © 2008 Prentice Hall Business Publishing Accounting Information Systems, 11/e Romney/Steinbart122 of 122 SUMMARY You’ve learned about decisions that need to be made in the production cycle and the information required to make these decisions. You’ve also learned about the major threats that present themselves in the production cycle and the controls that can mitigate those threats. Finally, you’ve learned how the company’s cost accounting system can help in achieving the entity’s objectives.