1. CACI Proprietary Information | Date 1 Sybase ASE 15.0.3 ESD#4 Upgrade Name: Semarria Rosemond Title: Systems Analyst, Lead Date: December 8, 2011

2. CACI Proprietary Information | Date 2 2 Installing Sybase ASE 15.0.3 on Windows Server 2003  Installing Sybase ASE for Windows Server is relatively simple.  It employs a Graphical User Interface (GUI) setup program, which makes the installation easy to understand, and automates most functions.  The setup program installs Sybase ASE software and utilities.  After the upgrade there will be a need to customize the setup to a configuration specific to PD².  Once these steps have been completed, the database is ready to be upgraded to PD2 v4.2 Increment 2 SR13.

3. CACI Proprietary Information | Date 3 3 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.1 Perform a Sybase ASE 15.0.3 ESD#4 Installation on Windows Server 2003 Platforms 3.1.1 Close All Applications −Ensure that the current session is the only Windows session on the database server. −Ensure that all applications are closed on the database server, especially the Sybase tools (e.g., isql, Sybase Central, Interactive SQL). −Use Windows Task Manager to confirm that dbisql.exe and scjview.exe are not present in the Processes tab

4. CACI Proprietary Information | Date 4 4 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.1 Perform a Sybase ASE 15.0.3 ESD#4 Installation on Windows Server 2003 Platforms 3.1.2 Before the Installation −The system requirements for the Adaptive Server are listed below. −Note: The fully qualified server name (e.g., dbserver.site.mil) of the database server is required during the installation process. Verify that Worksheet Item #1 contains this information.

5. CACI Proprietary Information | Date 5 5 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.1 Perform a Sybase ASE 15.0.3 ESD#4 Installation on Windows Server 2003 Platforms 3.1.2 Before the Installation −A minimum of 2 GB of free space on the installation drive is needed to install Sybase ASE software. −Verify that TCP/IP is correctly installed by “pinging” a fully qualified host name (e.g., the default gateway for the server, or pd2.caci.com).

6. CACI Proprietary Information | Date 6 6 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.1 Perform a Sybase ASE 15.0.3 ESD#4 Installation on Windows Server 2003 Platforms 3.1.2 Before the Installation −If more than 1024MB of RAM is to be assigned to the Sybase ASE 15.0.3 and the Windows operating system is 32-bit, it is critical that the Windows operating system can address 3GB of user-mode memory space. −Otherwise the Sybase ASE 15.0.3 Adaptive Server will fail to start when more than 1024MB of RAM is assigned. −This does not apply to Windows 64-bit.

7. CACI Proprietary Information | Date 7 7 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.1 Perform a Sybase ASE 15.0.3 ESD#4 Installation on Windows Server 2003 Platforms 3.1.2 Before the Installation −Windows Server 2003 32-bit: the file “boot.ini” must have the /3GB switch enabled. −Consult the Microsoft Knowledge Base regarding large memory support and setting the /3GB switch (http://www.microsoft.com/whdc/system/platform/server/PAE/P AEmem.mspx). −The database server machine must be rebooted after the update.

8. CACI Proprietary Information | Date 8 8 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.1 Perform a Sybase ASE 15.0.3 ESD#4 Installation on Windows Server 2003 Platforms 3.1.2 Before the Installation −Windows Server 2008 32-bit: −Click Start, click All Programs, and then click Accessories. Right-click Command prompt, and then click Run as administrator. Note: If Run as administrator is not a valid option, user should select Run as… and provide Administrator credentials to continue by selecting The Following User radio button and supplying the appropriate Administrator user id and password. Note: The Windows Security Warning/User Account Control message box may display. Accept the warning to continue.

9. CACI Proprietary Information | Date 9 9 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.1 Perform a Sybase ASE 15.0.3 ESD#4 Installation on Windows Server 2003 Platforms 3.1.2 Before the Installation −Windows Server 2008 32-bit: −Execute "bcdedit.exe". −Under the "Windows Boot Loader" section, if the "increaseuserva" parameter is lower than 3072 or does not exist, increase the user-model memory space to 3GB by executing: bcdedit.exe /set increaseuserva 3072 −Execute "bcdedit.exe" and confirm the change. −Reboot the server.

10. CACI Proprietary Information | Date 10 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.1 Perform a Sybase ASE 15.0.3 ESD#4 Installation on Windows Server 2003 Platforms 3.1.3 Replacing Sybase ASE License File −Prior to the installation of Sybase ASE 15.0.3 ESD#4 software, a new Sybase ASE license file must replace the existing license. To replace the existing license file: −1. Log in to the Windows database server (Worksheet Item #1) as the Sybase ASE OS user (Worksheet Item #2). −2. Open the Windows Explorer file manager utility. −3. Change the directory to the temporary directory specified in Worksheet Item #21. −4. Change the directory to the ase1503esd4 directory. −5. Change the directory to the licenses directory. −6. Select the license file. −Windows 32-bit: “CACI_ASE_Windows32_EDK.lic” −Windows 64-bit: “CACI_ASE_Windows64_EDK.lic”

11. CACI Proprietary Information | Date 11 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.1 Perform a Sybase ASE 15.0.3 ESD#4 Installation on Windows Server 2003 Platforms 3.1.3 Replacing Sybase ASE License File −Prior to the installation of Sybase ASE 15.0.3 ESD#4 software, a new Sybase ASE license file must replace the existing license. To replace the existing license file: −7. From the menu, select Edit/Organize  Copy. −8. Change the directory to the Sybase ASE install directory (Worksheet Item #3). −9. Change the directory to the SYSAM-2_0 directory. −10. Change the directory to the licenses directory. −11. From the menu, select Edit/Organize  Paste. −12. If the Confirm File Replace message displays, click the [Yes] button.

12. CACI Proprietary Information | Date 12 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.1 Perform a Sybase ASE 15.0.3 ESD#4 Installation on Windows Server 2003 Platforms 3.1.4 Installing Sybase ASE 15.0.3 ESD#4 for Windows Server 2003 −To install ASE Server components: −1. Log in to the Windows database server (Worksheet Item #1) as the Sybase ASE OS user (Worksheet Item #2). −2. Open Windows Explorer. −3. Change the directory to the temporary directory specified in Worksheet Item #21. −4. Change the directory to the ase1503esd4 directory. −5. Change directory to the ebf17771 (Windows 32-bit) or ebf17778 (Windows 64-bit) directory.

13. CACI Proprietary Information | Date 13 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.1 Perform a Sybase ASE 15.0.3 ESD#4 Installation on Windows Server 2003 Platforms 3.1.4 Installing Sybase ASE 15.0.3 ESD#4 for Windows Server 2003 −To install ASE Server components: −6. Select “setup.exe”, right-click and select Run as administrator to launch the Installation Wizard. Note: If Run as administrator is not a valid option, user should select Run as… and provide Administrator credentials to continue by selecting The Following User radio button and supplying the appropriate Administrator user id and password. Note: The Windows Security Warning/User Account Control message box may display. Accept the warning to continue.

14. CACI Proprietary Information | Date 14 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.1 Perform a Sybase ASE 15.0.3 ESD#4 Installation on Windows Server 2003 Platforms (The Welcome to the InstallShield Wizard for Sybase Adaptive Server Enterprise Suite version 15.0.3 ESD 4 window opens.) 7. Click the [Next] button. (The Destination window opens.)

15. CACI Proprietary Information | Date 15 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.1 Perform a Sybase ASE 15.0.3 ESD#4 Installation on Windows Server 2003 Platforms 8. Enter the path to the Sybase ASE install directory (Worksheet Item #3) and click the [Next] button.

16. CACI Proprietary Information | Date 16 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.1 Perform a Sybase ASE 15.0.3 ESD#4 Installation on Windows Server 2003 Platforms 9. Click the [Yes] button to overwrite existing Sybase installation. Wait a few seconds for the next window to open.

17. CACI Proprietary Information | Date 17 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.1 Perform a Sybase ASE 15.0.3 ESD#4 Installation on Windows Server 2003 Platforms (The Install Option window opens.) 10. Select the Update radio button and click the [Next] button to continue. (The Updated Features window opens.)

18. CACI Proprietary Information | Date 18 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.1 Perform a Sybase ASE 15.0.3 ESD#4 Installation on Windows Server 2003 Platforms 11. Select all check boxes and click the [Next] button. (The License Agreement window opens.)

19. CACI Proprietary Information | Date 19 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.1 Perform a Sybase ASE 15.0.3 ESD#4 Installation on Windows Server 2003 Platforms 12. From the drop-down list box, select the All regions license agreement and select the I agree to the terms of the Sybase license for the install location specified radio button. 13. Click the [Next] button to continue. (The Check System Info window opens.)

20. CACI Proprietary Information | Date 20 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.1 Perform a Sybase ASE 15.0.3 ESD#4 Installation on Windows Server 2003 Platforms (The Summary window opens.)

21. CACI Proprietary Information | Date 21 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.1 Perform a Sybase ASE 15.0.3 ESD#4 Installation on Windows Server 2003 Platforms 14. Click the [Next] button. (The Stopping Sybase Central window opens.)

22. CACI Proprietary Information | Date 22 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.1 Perform a Sybase ASE 15.0.3 ESD#4 Installation on Windows Server 2003 Platforms (The Stopping DBISQL window opens.)

23. CACI Proprietary Information | Date 23 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.1 Perform a Sybase ASE 15.0.3 ESD#4 Installation on Windows Server 2003 Platforms (The Installing window opens.)

24. CACI Proprietary Information | Date 24 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.1 Perform a Sybase ASE 15.0.3 ESD#4 Installation on Windows Server 2003 Platforms Note: Do not close any windows that may open during the installation process. If a window is shut down prior to the installer completing the installer will not be able to install the application correctly. If this happens, please contact the SPS Help Desk for instructions on how to recover.

25. CACI Proprietary Information | Date 25 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.1 Perform a Sybase ASE 15.0.3 ESD#4 Installation on Windows Server 2003 Platforms 15. If prompted to overwrite existing files, click the [Yes to All] button. The message may display twice.

26. CACI Proprietary Information | Date 26 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.1 Perform a Sybase ASE 15.0.3 ESD#4 Installation on Windows Server 2003 Platforms 16. Wait for the InstallShield Wizard to complete the software install. (The InstallShield Wizard Complete window opens.) 17. Click the [Next] button to continue. (The Remember Password Feature Option window opens.)

27. CACI Proprietary Information | Date 27 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.1 Perform a Sybase ASE 15.0.3 ESD#4 Installation on Windows Server 2003 Platforms 18. Select the No radio button and click the [Next] button. (The Configuring the “Remember Password” feature window opens.)

28. CACI Proprietary Information | Date 28 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.1 Perform a Sybase ASE 15.0.3 ESD#4 Installation on Windows Server 2003 Platforms (The Configure New Servers window opens.)

29. CACI Proprietary Information | Date 29 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.1 Perform a Sybase ASE 15.0.3 ESD#4 Installation on Windows Server 2003 Platforms 19. Clear all check boxes and click the [Next] button. (The Installation Completed window opens.)

30. CACI Proprietary Information | Date 30 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.1 Perform a Sybase ASE 15.0.3 ESD#4 Installation on Windows Server 2003 Platforms 20. Click the [Next] or the [Finish] button. 21. If prompted to reboot the machine, select Yes, restart my computer radio button and click the [Finish] button. Otherwise, click the [Finish] button to exit the installer.

31. CACI Proprietary Information | Date 31 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.2 Modify Sybase locales.dat File On the Windows database server (Worksheet Item #1), locate “locales.dat” file inside %SYBASE%\ locales directory, where %SYBASE% is the Sybase ASE install directory (Worksheet Item #3). To modify “locales.dat” file: −1. Open the “locales.dat” file using a text editor, such as Notepad. −2. Search for “[NT]” (without quotes).

32. CACI Proprietary Information | Date 32 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.2 Modify Sybase locales.dat File To modify “locales.dat” file: −3. Locate the following line: locale = default, us_english, where is the default character set currently being defined (e.g., iso_1) −4. Change the default character set to “cp437”. locale = default, us_english, cp437 −5. Save and close the file.

33. CACI Proprietary Information | Date 33 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.3 Modify Sybase Java Environment If Worksheet Item #20 is not empty, the Sybase Java environment needs to be restored. The Sybase upgrade installer resets the environment to default values. To restore Sybase Java environment: −1. Update the following system environment variable values to Worksheet Item #20: −Windows 32-bit: −a. SYBASE_JRE6 −b. SYBASE_JRE6_32 −Windows 64-bit: −a. SYBASE_JRE6 −b. SYBASE_JRE6_64 −2. Locate the SYBASE.bat file inside the Sybase ASE installation directory (Worksheet Item #3).

34. CACI Proprietary Information | Date 34 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.3 Modify Sybase Java Environment If Worksheet Item #20 is not empty, the Sybase Java environment needs to be restored. The Sybase upgrade installer resets the environment to default values. To restore Sybase Java environment: −3. Edit the SYBASE.bat file by removing the final two "set" commands, which points to the default value JRE-6_0_6_32BIT (32-bit) or JRE-6_0_6_64BIT (64-bit): −Windows 32-bit: −a. set SYBASE_JRE6_32 −b. set SYBASE_JRE6 −Windows 64-bit: −a. set SYBASE_JRE6_64 −b. set SYBASE_JRE6 −4. Save and close the modified SYBASE.bat file.

35. CACI Proprietary Information | Date 35 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.3 Modify Sybase Java Environment To restore Sybase Java environment: −5. Locate the ASE150.bat file inside the Sybase ASE installation directory (Worksheet Item #3). −6. Edit the ASE150.bat file by removing the final two "set" commands, which points to the default value JRE-6_0_6_32BIT (32- bit) or JRE-6_0_6_64BIT (64-bit): −Windows 32-bit: −a. set SYBASE_JRE6_32 −b. set SYBASE_JRE6 −Windows 64-bit: −a. set SYBASE_JRE6_64 −b. set SYBASE_JRE6 −7. Save and close the modified ASE150.bat file.

36. CACI Proprietary Information | Date 36 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.3 Modify Sybase Java Environment To restore Sybase Java environment: −8. Delete the default JRE directory inside \Shared directory, where is the Sybase ASE installation directory (Worksheet Item #3). −Windows 32-bit: JRE-6_0_6_32BIT −Windows 64-bit: JRE-6_0_6_64BIT

37. CACI Proprietary Information | Date 37 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.4 Apply Sybase ASE 15.0.3 ESD#4 System Catalog Scripts Note: Repeat this section for each affected Sybase instance. The following steps must be executed on the Sybase database server machine. −1. Log in to the Windows database server (Worksheet Item #1) as the Sybase operating system user (Worksheet Item #8). −2. Start Sybase ASE Adaptive Server and Backup Server services. −3. From the command prompt, execute the following command: cd /d %SYBASE%\ASE-15_0\scripts

38. CACI Proprietary Information | Date 38 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.4 Apply Sybase ASE 15.0.3 ESD#4 System Catalog Scripts The following steps must be executed on the Sybase database server machine. −4. From the command prompt, execute the following commands (each all in one line): isql –Usa –P" " -S –iinstmstr – oinstmstr.log isql –Usa –P" " -S –iinstcomm –oinstcomm.log isql -Usa -P" " -S -iinstsecu -oinstsecu.log isql -Usa -P" " -S -iinstmsgs.ebf - oinstmsgs.ebf.log isql -Usa -P" " -S -iinstalldbccdb - oinstalldbccdb.log isql -Usa -P" " -S -i installpcidb -o installpcidb.log is sa ‟ s password (PD²: Worksheet Item #7; MWS: Worksheet Item #11) is the Adaptive Server name on the machine (PD²: Worksheet Item #4; MWS: Worksheet Item #8)

39. CACI Proprietary Information | Date 39 Installing Sybase ASE 15.0.3 on Windows Server 2003  3.4 Apply Sybase ASE 15.0.3 ESD#4 System Catalog Scripts The following steps must be executed on the Sybase database server machine. −5. Close the command prompt window. −6. Shutdown and restart the Adaptive Server. Refer to Appendix E: Start and Stop Sybase ASE Services to shutdown and restart Adaptive Server.

40. CACI Proprietary Information | Date 40 Installing Sybase ASE 15.0.3 on Windows Server 2003  5. Post Upgrade Tasks 5.1 Prepare the Windows Workstation −Install Sybase Open Client 15.5 ESD#6 on the Windows workstation identified in Worksheet Item #12. −Refer to Sybase Open Client 15.5 ESD#6 Installation Guide for PD2 v4.2 Increment 2 SR13 for instructions on installing Sybase Open Client 15.5 ESD#6. −Ensure that the Interactive SQL utility is properly configured. Refer to Appendix A: Configuring Sybase Utilities on how to configure Interactive SQL.

41. CACI Proprietary Information | Date 41 Installing Sybase ASE 15.0.3 on Windows Server 2003  5. Post Upgrade Tasks 5.2 Verify the Sybase ASE Version Note: Repeat this section for each affected Sybase instance. −1. From the Windows workstation (Worksheet Item #12), log in to the Sybase Adaptive Server (PD²: Worksheet Item #4; MWS: Worksheet Item #8) as “sa” (PD²: Worksheet Item #7; MWS: Worksheet Item #11) using Interactive SQL. −2. Enter the following commands: select @@version go −3. Execute the commands by selecting SQL  Execute from the menu or pressing. −4. The result should include the following string: Adaptive Server Enterprise/15.0.3/EBF xxxxx ESD#4 −5. Close Interactive SQL.

42. CACI Proprietary Information | Date 42 Installing Sybase ASE 15.0.3 on Windows Server 2003  5. Post Upgrade Tasks 5.3 Check the Sybase ASE License Status −1. From the Windows workstation (Worksheet Item #12), log in to the Sybase Adaptive Server using Interactive SQL. −2. Enter the following commands: sp_lmconfig go −3. Execute the commands by selecting SQL  Execute from the menu or pressing. −4. In the Results panel, view the output on the Results tab.

43. CACI Proprietary Information | Date 43 Installing Sybase ASE 15.0.3 on Windows Server 2003  5. Post Upgrade Tasks 5.3 Check the Sybase ASE License Status −5. Confirm that proper license has been installed. −For Sybase ASE 15.0.3 ESD#4 running on Windows 32-bit or Sun Solaris SPARC 64-bit: −a. The License name ASE_CORE should have Permanent as the Expiry Date. −b. The Property Name PE should have EE as the Property Value. −c. The Property Name LT should have NA as the Property Value.

44. CACI Proprietary Information | Date 44 Installing Sybase ASE 15.0.3 on Windows Server 2003  5. Post Upgrade Tasks 5.3 Check the Sybase ASE License Status −5. Confirm that proper license has been installed. −For Sybase ASE 15.0.3 ESD#4 running on Windows 64-bit, Sun Solaris Intel 64-bit, and HP-UX Itanium 64-bit: −a. The License name ASE_CORE should have Permanent as the Expiry Date. −b. The Property Name PE should have EE as the Property Value. −c. The Property Name LT should have CP as the Property Value. −For other platforms, consult your Sybase license agreement. −6. If the proper license was not installed, following the direction set forth in this section of the Upgrade Guide.

45. CACI Proprietary Information | Date 45 Installing Sybase ASE 15.0.3 on Windows Server 2003  5. Post Upgrade Tasks 5.4 Restore Sybase JVM Module Path Parameter −To restore Sybase JVM Module Path parameter: −1. From the Windows workstation (Worksheet Item #12), log in to the Sybase Adaptive Server using Interactive SQL. −2. Select the master database from the drop-down list box on the top right. −3. Enter or copy and paste the provided commands. −4. Execute the commands by selecting SQL  Execute from the menu or pressing. −5. Close Interactive SQL. −6. Shutdown and restart the Sybase Adaptive Server. Refer to Appendix E: Start and Stop Sybase ASE Services.

46. CACI Proprietary Information | Date 46 Installing Sybase ASE 15.0.3 on Windows Server 2003  5. Post Upgrade Tasks 5.5 Verify Sybase JVM Version −To verify the Sybase JVM version: −1. From the Windows workstation (Worksheet Item #12), log in to the Sybase Adaptive Server using Interactive SQL. −2. Select the master from the database drop-down list box on the top right. −3. Execute the following commands: declare @name varchar(100) select @name = java.lang.System.getProperty("java.version") print @name go

47. CACI Proprietary Information | Date 47 Installing Sybase ASE 15.0.3 on Windows Server 2003  5. Post Upgrade Tasks 5.5 Verify Sybase JVM Version −To verify the Sybase JVM version: −4. Execute the commands by selecting SQL  Execute from the menu or pressing. −5. Confirm that the output reports the JVM version. −6. Close Interactive SQL.

48. CACI Proprietary Information | Date 48 Installing Sybase ASE 15.0.3 on Windows Server 2003  5. Post Upgrade Tasks 5.6 Restore Auditing and Monitoring −1. From the Windows workstation (Worksheet Item #12), log in to the Sybase Adaptive Server using Interactive SQL. −2. Select the master database from the drop-down list box on the top right. −3. If the Worksheet Item (PD²: Worksheet Item #13; MWS: Worksheet Item #15) is 1, enter the following command to enable auditing: sp_configure 'auditing',1 go −4. Execute the commands by selecting SQL  Execute from the menu or pressing. −5. Clear the SQL Statements panel. −6. If the Worksheet Item (PD²: Worksheet Item #14; MWS: Worksheet Item #16) is 1, enter the following command to enable monitoring: sp_configure 'enable monitoring',1 go −7. Execute the commands by selecting SQL  Execute from the menu or pressing. −8. Close Interactive SQL.

49. CACI Proprietary Information | Date 49 Installing Sybase ASE 15.0.3 on Windows Server 2003  5. Post Upgrade Tasks 5.7 Configure “sybpcidb” Database Options −1. From the Windows workstation (Worksheet Item #12), log in to the Sybase Adaptive Server (PD2: Worksheet Item #4; MWS: Worksheet Item #8) as “sa” (PD2: Worksheet Item #7; MWS: Worksheet Item #11) using Interactive SQL. −2. Enter following commands: use master go sp_dboption sybpcidb, 'trunc log on chkpt', 'true' go use sybpcidb go checkpoint go

50. CACI Proprietary Information | Date 50 Installing Sybase ASE 15.0.3 on Windows Server 2003  5. Post Upgrade Tasks 5.7 Configure “sybpcidb” Database Options −3. Execute commands by selecting SQL  Execute from the menu or pressing. −4. The following messages in the Results panel are normal. Database option 'trunc log on chkpt' turned ON for database 'sybpcidb'. Running CHECKPOINT on database 'sybpcidb' for option 'trunc log on chkpt' to take effect. DUMP TRANSACTION is not allowed when 'trunc log on chkpt' is ON. Use DUMP DATABASE or DUMP TRANSACTION... WITH TRUNCATE_ONLY or WITH NO_LOG instead. −5. Close Interactive SQL.

51. CACI Proprietary Information | Date 51 Installing Sybase ASE 15.0.3 on Windows Server 2003  5. Post Upgrade Tasks 5.8 Check Database Integrity −From the Windows workstation (Worksheet Item #12), log in to the Sybase Adaptive Server using Interactive SQL. −Execute dbcc checkstorage on all databases on all databases except tempdb by executing the following command (replace with the actual database name): use go dbcc checkstorage go sp_dbcc_summaryreport go

52. CACI Proprietary Information | Date 52 Installing Sybase ASE 15.0.3 on Windows Server 2003  5. Post Upgrade Tasks 5.8 Check Database Integrity −If the dbcc summary report returns any hard fault (i.e., the value under the Hard Faults column is greater than 0) on the database, execute the following dbcc commands on the databases to get additional information about the errors (replace with actual database name): use go dbcc checkdb go dbcc checkalloc go dbcc checkcatalog go

53. CACI Proprietary Information | Date 53 Installing Sybase ASE 15.0.3 on Windows Server 2003  6. Performing Sybase ASE Post Configuration Update 6.1 Execute the Sybase ASE Post Configuration Installer −To execute the Sybase ASE Post Configuration Installer: −1. Close all applications on the Windows workstation (Worksheet Item #12). −2. On the Windows workstation (Worksheet Item #12), locate the Sybase ASE Post Configuration Installer ZIP file “SybASE1503ESD4PostConfigInstaller.zip.” −The file was downloaded in Section 2.17: Retrieve Sybase ASE 15.0.3 ESD#4 Installers. −The file is on the CD in the optical drive. −3. Open the.zip file. −4. Double-click the “Password.txt” file to obtain the password.

54. CACI Proprietary Information | Date 54 Installing Sybase ASE 15.0.3 on Windows Server 2003  6. Performing Sybase ASE Post Configuration Update 6.1 Execute the Sybase ASE Post Configuration Installer −To execute the Sybase ASE Post Configuration Installer: −5. Double-click the “Sybase_ASE_1503_ESD4_Post_Config.zip” file. −6. Enter the password and click [OK]. −7. Extract the Sybase ASE Post Configuration Installer executable file “Sybase_ASE_1503_ESD4_Post_Config.exe” to a desired location. −8. Locate the extracted Sybase ASE Post Configuration Installer executable file. −9. Right-click the executable file and select Run as administrator to launch the Installation Wizard.

55. CACI Proprietary Information | Date 55 Installing Sybase ASE 15.0.3 on Windows Server 2003  6. Performing Sybase ASE Post Configuration Update 6.1 Execute the Sybase ASE Post Configuration Installer −Click the [Next] button. (The License Agreement window opens.)

56. CACI Proprietary Information | Date 56 Installing Sybase ASE 15.0.3 on Windows Server 2003  6. Performing Sybase ASE Post Configuration Update 6.1 Execute the Sybase ASE Post Configuration Installer −Read the License Agreement and click the [Yes] button to accept the terms. (The Database Server Information window opens.)

57. CACI Proprietary Information | Date 57 Installing Sybase ASE 15.0.3 on Windows Server 2003  6. Performing Sybase ASE Post Configuration Update 6.1 Execute the Sybase ASE Post Configuration Installer −Enter the Sybase ASE server name (PD²: Worksheet Item #4; MWS: Worksheet Item #8) and click the [Next] button.

58. CACI Proprietary Information | Date 58 Installing Sybase ASE 15.0.3 on Windows Server 2003  6. Performing Sybase ASE Post Configuration Update 6.1 Execute the Sybase ASE Post Configuration Installer −Enter the IP Address (Worksheet Item #1) and Port number (Worksheet Item #5) for the Sybase Server. −Click the [Next] button. (The Sybase Login Information window opens.)

59. CACI Proprietary Information | Date 59 Installing Sybase ASE 15.0.3 on Windows Server 2003  6. Performing Sybase ASE Post Configuration Update 6.1 Execute the Sybase ASE Post Configuration Installer −Enter “sa” for the Sybase Super User Login and the password (PD2: Worksheet Item #7; MWS: Worksheet Item #11) for the Sybase Super User Password. −Click the [Next] button. (A series of connection and policy validation messages displays.)

60. CACI Proprietary Information | Date 60 Installing Sybase ASE 15.0.3 on Windows Server 2003  6. Performing Sybase ASE Post Configuration Update 6.1 Execute the Sybase ASE Post Configuration Installer −If the existing password policy does not comply with the DoD password policy, all users on the Sybase server must have their password reset. −The installer requests a new default password to be entered. (The New Default Password window opens.)

61. CACI Proprietary Information | Date 61 Installing Sybase ASE 15.0.3 on Windows Server 2003  6. Performing Sybase ASE Post Configuration Update 6.1 Execute the Sybase ASE Post Configuration Installer −Enter the new default password in the New Password field for all Sybase logins. −The new password must comply with the DoD password policy. Enter the same password in the Confirm Password field Note: Every user’s password will be changed on the Sybase instance. −Click the [Next] button. (A series of password validation messages displays.) (The “remember the new password” message box opens.)

62. CACI Proprietary Information | Date 62 Installing Sybase ASE 15.0.3 on Windows Server 2003  6. Performing Sybase ASE Post Configuration Update 6.1 Execute the Sybase ASE Post Configuration Installer −Click [OK].

63. CACI Proprietary Information | Date 63 Installing Sybase ASE 15.0.3 on Windows Server 2003  6. Performing Sybase ASE Post Configuration Update 6.1 Execute the Sybase ASE Post Configuration Installer −The installer displays the next screen. (The Start Copying Files window opens.) −Click the [Next] button. (The Setup Status window opens.)

64. CACI Proprietary Information | Date 64 Installing Sybase ASE 15.0.3 on Windows Server 2003  6. Performing Sybase ASE Post Configuration Update 6.1 Execute the Sybase ASE Post Configuration Installer −When the installer completes the installation, a notification displays stating that the post configuration update was successful. (The InstallShield Wizard Complete window opens.)

65. CACI Proprietary Information | Date 65 Installing Sybase ASE 15.0.3 on Windows Server 2003  6. Performing Sybase ASE Post Configuration Update 6.1 Execute the Sybase ASE Post Configuration Installer −Click the [Finish] button. If errors are encountered, the errors must be addressed and the Sybase ASE Post Configuration Installer must be executed again. However, the following errors can be ignored: −“Msg 4023, Level 10, State 1”, which warns the user of expiring password. −“Msg 10316, Level 14, State 2” followed by “Msg 17720, Level 16, State 1” in the “ResetSybPasswords.txt” file. These messages indicate that existing user already has the new password as the current password, and therefore the password is not updated.

66. CACI Proprietary Information | Date 66 Installing Sybase ASE 15.0.3 on Windows Server 2003  6. Performing Sybase ASE Post Configuration Update 6.2 Update the Sybase System Administrator Password Note: Repeat this section for each affected Sybase instance. Note: Only perform this section if all user passwords were reset in Section 6.1 Execute the Sybase ASE Post Configuration Installer. −The Sybase Post Configuration Installer may reset password for all logins, including the Sybase System Administrator login (e.g., sa). −For security purposes, the password of the Sybase System Administrator should be updated to be different from other users.

67. CACI Proprietary Information | Date 67 Installing Sybase ASE 15.0.3 on Windows Server 2003  6. Performing Sybase ASE Post Configuration Update 6.2 Update the Sybase System Administrator Password −1. From the Windows workstation (Worksheet Item #12), log in to the Sybase Adaptive Server using Interactive SQL. −2. Enter the following commands: sp_password ' ', ' ', go where is the new default password, is the new password, and is the name of the Sybase System Administrator (e.g., sa). The new password must comply with the DoD password policy.

68. CACI Proprietary Information | Date 68 Installing Sybase ASE 15.0.3 on Windows Server 2003  6. Performing Sybase ASE Post Configuration Update 6.2 Update the Sybase System Administrator Password −3. Execute the commands by selecting SQL  Execute from the menu or pressing. The password has been updated when the following message displays: Password correctly set. −4. Update the Worksheet (PD²: Worksheet Item #7; MWS: Worksheet Item #11). −5. Close Interactive SQL.

69. CACI Proprietary Information | Date 69 Installing Sybase ASE 15.0.3 on Windows Server 2003  6. Performing Sybase ASE Post Configuration Update 6.3 Apply Java Update −PD² 4.2 Increment 2 SR13 uses the JVM in Sybase ASE 15.0.3 ESD#4 to enhance product features. −Apply the latest SPS Java update for PD² 4.2 Increment 2 SR13 to obtain Java bug fixes and improvements. −Refer to the SPS Java Update Guide on the SPS Knowledge Base web site for the update instructions.

70. CACI Proprietary Information | Date 70 Installing Sybase ASE 15.0.3 on Windows Server 2003  7. Applying PD² Service Release Upgrade 7.1 Execute PD² v4.2 Increment 2 SR13 Database Upgrade Installer Note: Perform this section for the PD² instance only. −From the Windows workstation (Worksheet Item #12), execute PD² v4.2 Increment 2 SR13 Database Upgrade Installer. −Use the following parameters for the update process: −Sybase Server Name: Worksheet Item #4. −Database Name: the name of PD² database to be updated. −IP Address: Worksheet Item #1. −Port Number: Worksheet Item #5. −Sybase Login and Password: Worksheet Item #7. −Refer to the PD² v4.2 Increment 2 SR13 and FPDS Engine v3.5 Database Upgrade Guide for complete instructions.

71. CACI Proprietary Information | Date 71 Installing Sybase ASE 15.0.3 on Windows Server 2003  7. Applying PD² Service Release Upgrade 7.2 Backup Databases −Locate a new backup directory on the Sybase ASE database server and record its path in Worksheet Item #22. The free space should exceed or be equal to Worksheet Item #17. Verify the Sybase ASE operating system user (Worksheet Item #2) has the read, write, and execute privileges on the directory. −From the Windows workstation: −dump database to '.ncp' with compression=5 go −Replace with the name of the database and with the designated backup location (Worksheet Item #25). −Remember to include the trailing \ (Windows) or / (UNIX) as part of the. −Use “.ncp” as the file extension of the backup file to indicate this is a compressed dump with the new compression algorithm. −For a large database, you may need to stripe the backup into multiple dump files (up to 32) to speed up the process.

72. CACI Proprietary Information | Date 72 Installing Sybase ASE 15.0.3 on Windows Server 2003  7. Applying PD² Service Release Upgrade 7.3 Unlock PD² Users −As part of Section 2.5: Verify That Users Are Logged Off and Processes Are Stopped, PD² logins are locked. −These logins must be unlocked before PD² application can be used. −Use Sybase Central v6.0 to unlock these Sybase logins.

73. CACI Proprietary Information | Date 73 Installing Sybase ASE 15.0.3 on Windows Server 2003  7. Applying PD² Service Release Upgrade 7.4 Restart External Servers and Scheduled Tasks −In Section 2.5: Verify That Users Are Logged Off and Processes Are Stopped, external servers that access the database server were shutdown (e.g., Application Server, AcquiLine Web Server, webMethods Integration Servers, etc.). −Restart these external servers and ensure that database connections have been updated with the updated database user password. −Disabled scheduled tasks (e.g., database backups and server restart scripts) can be enabled. −Ensure to use the updated database user password.

74. CACI Proprietary Information | Date 74 Installing Sybase ASE 15.0.3 on Windows Server 2003  8. Additional Information Perform Section 8.1: Clean Up Sybase ASE 15.0.3 ESD#4 Installer Files only after PD² databases are upgraded successfully. Section 8.2: Update Statistics provides information about updating statistics.

75. CACI Proprietary Information | Date 75 Installing Sybase ASE 15.0.3 on Windows Server 2003  8. Additional Information 8.1 Clean Up Sybase ASE 15.0.3 ESD#4 Installer Files −After successful installations of Sybase ASE 15.0.3 ESD#4, the installation files can be removed. −Remove directory ase1503esd4 in the temporary directory (Worksheet Item #21) on the database server (Worksheet Item #1).

76. CACI Proprietary Information | Date 76 Installing Sybase ASE 15.0.3 on Windows Server 2003  8. Additional Information 8.2 Update Statistics −The Sybase ASE 15.0.3 ESD#4 query optimizer uses the statistics to determine the best query plan. −Outdated statistics could result in suboptimal performance in the database server. −To optimize query performance in Sybase ASE 15.0.3 ESD#4, updating statistics is strongly recommended. −The update statistics command is executed per table. The syntax is: update index statistics on go −where is a PD² table. All audit tables (table names begin with “z” or end with “_audit”) can be excluded, except tables: −clin_fund_audit −dsk_obj_audit −line_item_audit −delivery_item_audit (If Adapter is installed)

77. CACI Proprietary Information | Date 77 Installing Sybase ASE 15.0.3 on Windows Server 2003  8. Additional Information 8.2 Update Statistics −The statistics should be updated during the non-business hours to reduce the impact to the system users. −Sites with large databases should plan on breaking the updates into batches. −Large tables with many indexes may take hours to complete the statistics updates.

78. CACI Proprietary Information | Date 78 Questions?