Download presentation
Presentation is loading. Please wait.
Published byScot Clement Skinner Modified over 8 years ago
1
Circuits, Voltage & Current Electronics Mr. Engel
2
Objectives Sketch a basic circuit and identify its four parts. Explain differences between series, parallel and series-parallel circuits. Define voltage and current. Differentiate between direct current (DC) and alternating current (AC) Explain what sine waves represent.
3
Parts of a Circuit 1) The Energy Source 2) The Conductors 3) The Load 4) The Control Device
4
Energy Source Energy source produces the force to cause electrons to move. The force is referred to as Voltage or Electromotive Force. Common Energy Sources include chemical cells and electromechanical generators. Current: the flow of electrons. The current must remain continuous.
5
Conductors Conductors provide an easy path for electron flow. Copper is the most common conductor. Insulators used to prevent shorts and accidents. Other common conductors include your automobile frame and gold in circuit boards.
6
Load Load changes the energy of moving electrons into some other useful form of energy. Series Circuit: provides only one path or loop for electrons to move from source to load and back. Parallel Circuit: two or more different paths or loops which electrons can flow. Series-Parallel: Combination of series and parallel circuits to form one circuit with several paths or loops.
7
Circuits in Action Simple light circuits http://www.youtube.com/watch?v=D2monVkCkX4 http://www.youtube.com/watch?v=D2monVkCkX4
8
Control Device Control devices open and close the circuit, thus opening or closing the flow of electrons. When a switch is “ON”, the circuit is complete and electrons can flow When a switch is “OFF”, the circuit is broken and electrons are blocked from flowing Other devices include: electromagnetic relays, diodes, transistors, and logic circuits.
9
Voltage Most home electrical equipment: 120 Volts Industrial applications: 120 V, 208 V, 480 V, 4160 V, higher The Common Flashlight: 1.5 V Some television picture tubes: 30,000 V
10
Current Flow of electrons is measured in Amperes, or Amps One amp = 6,240 Quadrillion electrons flowing past one point in one second of time 100 Watt Light Bulb = 0.8 A 1 HP Electric Motor = 6 A Cranking of Car Motor = over 200 A
11
Direct Current (DC) Produced in a circuit by a steady voltage source. + and - terminals don’t change over time. “Fixed Polarity” Electric Cells, Batteries and DC Generators create a direct current.
12
Alternating Current (AC) Produced by a voltage source that changes polarity (+ & -) with time. Electron flow flows one way, then another, then back. Alternators produce an alternating current. Industrial induction motors use AC
13
Brain Boosters! What items in your home might use DC? AC?? Chapter Review Questions Electricity & Electronics – Red Text Book Numbers 1-23 on page 66 Complete the sentences and drop box
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.