1. David Rodriguez

2.  Use protective glasses  Be careful of sharp tools  Have first aid-kit near by  Familiarize yourself with surroundings

3.  Crimpers/Stripper  Utility knife  Cat 5 cable  RJ-45 connectors  Diagonal wire cutters  Precision screw driver set  Tester

4. Rodriguez, D. (2014).8 [Picture]. By David Rodriguez

5. Rodriguez, D. (2014).9 [Picture]. By David Rodriguez

6. Rodriguez, D. (2014).10 [Picture]. By David Rodriguez

7. Rodriguez, D. (2014).11 [Picture]. By David Rodriguez

8. Rodriguez, D. (2014).12 [Picture]. By David Rodriguez

9. Rodriguez, D. (2014).13 [Picture]. By David Rodriguez

10. Rodriguez, D. (2014).14 [Picture]. By David Rodriguez

11. C. Morgan. (2000, May 12) “568B” [Picture]. Retrieved on July 20, 2104 on http://lusitani.com/IMAGES/ROLL/568b.jpg

12.  Cut wire to length and strip back the outer cover  Tip: Be careful not to nick the twisted pairs Rodriguez, D. (2014).15 [Picture]. By David Rodriguez

13.  Align wires to the protocol that will be used and cut ½ inch from the cover Rodriguez, D. (2014).16 [Picture]. By David Rodriguez

14.  Insert wires into the rj-45 plug to match the 568B configuration C. Morgan. (2000, May 12) “568B” [Picture]. Retrieved on July 20, 2104 on http://lusitani.com/IMAGES/ROLL/568b.jpg

15.  Place connector in the crimper Rodriguez, D. (2014).17 [Picture]. By David Rodriguez

16.  Repeat to the other end, start at step 1 Rodriguez, D. (2014).15 [Picture]. By David Rodriguez