1. Process, Power and Marine Division SmartPlant 3D Common Task

2. © 2006. Intergraph Corporation. All Rights Reserved. 2 Agenda  SmartPlant 3D Introduction  Templates/Session Files  Filters (Database query)  Views  Common Toolbar  Selecting Objects  Surface Style Rules  WBS Items  Common Toolbar

3. © 2006. Intergraph Corporation. All Rights Reserved. 3 Agenda Cont’  Space management  Inserting Reference Files  Placing Control Points  Interference Detection

4. © 2006. Intergraph Corporation. All Rights Reserved. Site Database: Contains names of plants and catalog, model and report databases associated with them. Catalog Database: Contains the reference data that is used by all disciplines. Model Database: Contains design information Report Database : Collection of views on the plant, site and catalog. Model Database Site Database setCatalog Database set Report Database set SP3D Intro: Database Architecture

5. © 2006. Intergraph Corporation. All Rights Reserved. 5 SP3D Intro: Single Database Set File boundaries inhibit access to data. File boundaries inhibit access to data. SYSTEM ASSEMBLY SPACE SYSTEM SPACE Databases provide easy access to arbitrary subsets of data. Databases provide easy access to arbitrary subsets of data. CAD File Single Logical Database CAD File CAD File CAD File CAD File CAD File CAD File CAD File CAD File CAD File CAD File CAD File CAD File CAD File CAD File CAD File CAD File CAD File CAD File ASSEMBLY Model Database

6. © 2006. Intergraph Corporation. All Rights Reserved. 6 Define Workspace (filter on database): See only the data you want to see Builds a logical “Working Set”  System  Assembly  Spatial (Volume or Planes)  Logical Permission Group  Object Types/Properties Saved Session Files SP3D Intro: Database Query Workspace Catalog Database set Report Database set Model Database Display Site Database set Where did my design file go?

7. © 2006. Intergraph Corporation. All Rights Reserved. 7 © 2007. Intergraph Corporation. All Rights Reserved. Site 1 Model 1 Model 2 Model 3 Catalog 1 Catalog 2 Report 3 Report 2 Report 1 Multiple Plants can rely upon the same Catalog. SP3D Intro: Database Architecture

8. © 2006. Intergraph Corporation. All Rights Reserved. 8 SmartPlant “Task” Oriented Interface Common Windows Interface Ribbon Bars Graphic Views SP3D Intro: Common Windows Based User Interface Main Menu Task Toolbar Active View Status Bar Common Toolbar Workspace Explorer Active command Ribbon bar Access Control

9. © 2006. Intergraph Corporation. All Rights Reserved. 9 Templates: New Session Templates Whenever you create a new session, you are working with templates. In this context, a template is a standard workspace file that a user has placed in the templates folder; you use a template as a pattern to assemble the parameters you want for a new work session. New Session Templates  Store option settings  Store Tasks Lists Settings  Views  Background colors  And more

10. © 2006. Intergraph Corporation. All Rights Reserved. 10 Templates: Session Files When the save command is selected while in the SmartPlant 3D interface a dialog box will prompt immediately asking for the desired path for the.ses file:

11. © 2006. Intergraph Corporation. All Rights Reserved. 11 Templates: Session Files cont’ Once the.ses file path has been specified all of the 3D model data displayed in the model workspace as well as options task list and graphical views will be stored in a session file.

12. © 2006. Intergraph Corporation. All Rights Reserved. 12 Define Workspace Command - (Ctrl +W) SmartPlant 3D Interface Select the model database Select or create new filter Edit Existing Filter

13. © 2006. Intergraph Corporation. All Rights Reserved. 13 A filter is a set of search criteria that selects or retrieves data based on the object properties: – System – Assembly – Named Space – Work Breakdown Structure (WBS) – Analysis – Permission group – Object Type – Spatial (Volume) – Reference – Properties – PDS (If PDS project attached) Filters DB1 DB2 DB3 Workspace See only the data you want to see.

14. © 2006. Intergraph Corporation. All Rights Reserved. 14 Catalog Filters are filters which are stored in the catalog and are available to all users that use the same catalog Plant Filters are filters available to all users in a model. These filters are stored in the model database My Filters are created by the user and are only visible to him. These filters are stored in the model database Filters Catalog Filters Plant Filters My Filters

15. © 2006. Intergraph Corporation. All Rights Reserved. 15 Simple Filters Simple Filter is a query based on the object properties defined through GUI Compound Filters A “Compound” filter is two or more filters with an operator between them. SQL Filters Is a filter which provides a place to store user-written SQL query Filters Simple Filter Compound Filter SQL Filter

16. © 2006. Intergraph Corporation. All Rights Reserved. 16 – New Folder – New Filter (Simple or Asking) – New Compound Filter – New SQL Filter – Delete – Rename – Properties Filters Folder Delete Rename Properties

17. © 2006. Intergraph Corporation. All Rights Reserved. 17 System Tab Expand the search to include all selected systems – A system is a way to group objects logically – e.g. by discipline, by design area, by physical area, etc – Every object must belong to a system – System Types Filter Properties

18. © 2006. Intergraph Corporation. All Rights Reserved. 18 Volume Tab Restrict the search to return only objects within the volume Filter Properties

19. © 2006. Intergraph Corporation. All Rights Reserved. 19 Object Class Tab Restrict the search to return only objects of the selected types Filter Properties

20. © 2006. Intergraph Corporation. All Rights Reserved. 20 Session Template + Filter = Workspace/Session File Session Templates & Filter

21. © 2006. Intergraph Corporation. All Rights Reserved. 21 SP3D Practice Labs  Creating a Session File  Defining a Workspace by a System Filter  Defining a Workspace by a Volume Filter

22. © 2006. Intergraph Corporation. All Rights Reserved. 22 View Manipulation Common Environment Toolbar Common views command allow you quickly change the view orientation to any standard isometric/orthogonal orientation Commo n Views

23. © 2006. Intergraph Corporation. All Rights Reserved. 23 View Manipulation Common Environment Toolbar Zoom Tool command: - Zoom in (mouse roller ball) - Zoom out (mouse roller ball) - Zoom Area (left mouse click, drag and release) - Pan (middle mouse drag) Zoom Tool Pan Zoom Area

24. © 2006. Intergraph Corporation. All Rights Reserved. 24 View Manipulation Common Environment Toolbar Fit View command: Fit all visible objects within the current clipping volume in the Active View If objects are selected, then the command will fit only the selected objects Fit

25. © 2006. Intergraph Corporation. All Rights Reserved. 25 View Manipulation Common Environment Toolbar Refresh command: Update your workspace definition (filter) in the Active View Refresh

26. © 2006. Intergraph Corporation. All Rights Reserved. 26 View Manipulation Common Environment Toolbar Rotate View command: - Rotate the view interactively - Change the rotation axis - Change the rotation point Rotate View

27. © 2006. Intergraph Corporation. All Rights Reserved. 27 View Manipulation Look at Surface command: -Rotate the active view planar to the selected surface

28. © 2006. Intergraph Corporation. All Rights Reserved. 28 View Manipulation Establishing Clipping Volume - Clipping by Object - Clipping by Volume - Clear Clipping

29. © 2006. Intergraph Corporation. All Rights Reserved. 29 View Manipulation Common Environment Toolbar Clip by Object command: Allows you to define the view clipping volume (rectangular parallopiped) to be the same as the object’s range box in your active view Clip by Object

30. © 2006. Intergraph Corporation. All Rights Reserved. 30 View Manipulation Smartstep ribbon bar A command step is also provided to assign the same clipping volume to additional views Use the Shift key to select multiple objects Clip by Object Select Object Select View Reject Accept

31. © 2006. Intergraph Corporation. All Rights Reserved. 31 View Manipulation Common Environment Toolbar Clip by Volume command: Allows you to set the view clipping volume so that all objects not inside the clipped area are hidden from the selected view Clip by Volume

32. © 2006. Intergraph Corporation. All Rights Reserved. 32 View Manipulation Smartstep ribbon bar Clip by Volume First point Second point Third point Four point Select View Drag Clipping planes

33. © 2006. Intergraph Corporation. All Rights Reserved. 33 View Manipulation Clear Clipping command: Remove the clipping volume. It then prompts for select of the next window to clear The command is terminated by: - Right mouse click - Esc Key - Pick of another command Common Environment Toolbar Clear Clipping

34. © 2006. Intergraph Corporation. All Rights Reserved. 34 View Manipulation Main Menu Restore the Previous View

35. © 2006. Intergraph Corporation. All Rights Reserved. 35 View Manipulation Common Environment Toolbar Active View control command: Provides commands to dynamically control the view parameters of the active view Active View Control

36. © 2006. Intergraph Corporation. All Rights Reserved. 36 View Manipulation Common Environment Toolbar Saved View (Named View) command You can save the settings (location, orientation) of the active view so that you can apply them again later Recall views from the pull down on the command, four standard views supplied. Named View Recall Views

37. © 2006. Intergraph Corporation. All Rights Reserved. 37 View Manipulation Common Environment Toolbar View by 3 Points - Let you pick 3 Points that define a plane - The plane of your screen is the plane defined above (pt3 will be located the center of the view plane) View along line - Lets you pick the two points along a line. - The plane of your screen is the plane perpendicular to above line View by 3 pts View along line View by pts

38. © 2006. Intergraph Corporation. All Rights Reserved. 38 Measure Tool -> Measure Measure Actual or Minimum 3D linear distance between two points Measure delta E, N, EL distance between two points Measure actual angle defined by three points Measure radius and diameters Measure Min Distance between points Measure Distance along object Displays Relevant Data Set active Coordinate System Measure Min Distance between objects Measure Rad / Dia Measure angle between 3 points Measure angle between objects Define coord system

39. © 2006. Intergraph Corporation. All Rights Reserved. 39 SmartSketch SmartSketch is the mechanism to automatically find special points when the command is looking for a point.

40. © 2006. Intergraph Corporation. All Rights Reserved. 40 Allows you to enable the SmartSketch indicators SmartSketch Options

41. © 2006. Intergraph Corporation. All Rights Reserved. 41 SmartSketch The system finds Key point and Point on Geometry whenever you move the cursor over those points System uses only those points (stored in the stack) and check for linear relationship points against every object in the workspace

42. © 2006. Intergraph Corporation. All Rights Reserved. 42 SmartSketch User will have two options on what objects are located by SmartSketch - Locate on Display List - Locate on List Only SmartSketch Lock Constraint When SmartSketch is being used, a middle mouse click will lock the currently active smartsketch constraint. - Middle mouse button ( VERY USEFUL TOOL ) - Ctrl –L keys

43. © 2006. Intergraph Corporation. All Rights Reserved. 43 SmartSketch User will have two options on what objects are located by SmartSketch - Locate on Display List - Locate on List Only Clear Stack Set Stack Size Set Dwell Time Toggle Display/List Only Locate List

44. © 2006. Intergraph Corporation. All Rights Reserved. 44 Pinpoint  PinPoint An options for moving or placing objects with precision.  Display On/Off (F9) - Displays or hides the PinPoint options and distance values. The shortcut key for this box is F9.  Reposition Target - Changes the location of the target point. The EX- and NY-coordinates are relative to a target point you define in the view. Also, you can reposition the PinPoint target by pressing F12.

45. © 2006. Intergraph Corporation. All Rights Reserved. 45 Common Views Zoom Tool Window Area Refresh View Active View Control Rotate View Looking at Surface View by 3 points View along line Clipping Common Toolbar

46. © 2006. Intergraph Corporation. All Rights Reserved. 46 Common Tools  Copy  Paste  Delete  Move  Rotate Object  Undo

47. © 2006. Intergraph Corporation. All Rights Reserved. 47 Common Tools Conti’  New Session  Open Existing Session  Save Current Session (.SES file)  Refresh Active Workspace

48. © 2006. Intergraph Corporation. All Rights Reserved. 48 Select Objects Select Command By Fence Inside Control By Fence Overlap Control Use shift key to add or remove objects from the select set. Tools -> Select by Filter Use Workspace Navigator & Quick Icon and toolbar

49. © 2006. Intergraph Corporation. All Rights Reserved. 49 Main Menu The software's menu bar allows you to access all commands, divided by workflow or task. When you click a command, a description of the command appears in the message field at the bottom left of the main application window. You can also click the Help button on the main toolbar, and then click a menu command to view a description of that command.

50. © 2006. Intergraph Corporation. All Rights Reserved. 50 Allows you to enable the Undo command and the status bar The activation time of the quick pick tool Define the locate zone for SmartSketch Define the Tabs to display in the Workspace Explorer General Options

51. © 2006. Intergraph Corporation. All Rights Reserved. 51 Allows you to select the colors the system uses for the background, Highlight and selected elements Colors Options

52. © 2006. Intergraph Corporation. All Rights Reserved. 52 Sets the display units Sets the precision of the units Everything stored in SI units in database Units can be added to any keyed in input values Example: Slope: in / ft Distance: in (fractional) Units of Measure Options

53. © 2006. Intergraph Corporation. All Rights Reserved. 53 File Locations File Locations Options

54. © 2006. Intergraph Corporation. All Rights Reserved. 54 Allows you to enable the SmartSketch indicators SmartSketch Options

55. © 2006. Intergraph Corporation. All Rights Reserved. 55 You can format a View by defining a render mode and perspective setting Render mode: Outline, Smooth Shaded and Shaded with Enhanced Edges Aspect is a geometric representation for an object Formatting the Active View

56. © 2006. Intergraph Corporation. All Rights Reserved. 56 Styles are collections of color, lighting, and render modes that you can apply to all views or to specific items in the views. New user styles are stored in the database - View Style - Surfaces Style Applying Styles All Styles Or Styles used in workspaces

57. © 2006. Intergraph Corporation. All Rights Reserved. 57 – to Selected objects – Using surface style rules Applying Surface Style Translucent Green

58. © 2006. Intergraph Corporation. All Rights Reserved. 58 – A Surface Style Rule consists of a filter and the named surface style to be applied to the specific aspects of the objects identified by the filter Applying Surface Style

59. © 2006. Intergraph Corporation. All Rights Reserved. 59 – Surface style Rules is saved in the model database – Surface style rule applied to the workspace is saved in the session file – Copy/Paste functionality Applying Surface Style

60. © 2006. Intergraph Corporation. All Rights Reserved. 60 SP3D Practice Labs  Manipulating Views  Selecting Objects in a model  Applying a Surface Style Rule

61. © 2006. Intergraph Corporation. All Rights Reserved. 61 Hide/Show command Hidden objects are displayed in Italic Text

62. © 2006. Intergraph Corporation. All Rights Reserved. 62 Label Editor Allows to edit labels in an easy way using common User Interface The edited label is saved in the model DB ToolTips

63. © 2006. Intergraph Corporation. All Rights Reserved. 63 ToolTips

64. © 2006. Intergraph Corporation. All Rights Reserved. 64  Creates a relationship in the database between each object in the select set and the selected Work Breakdown Structure (WBS) item in the workspace explorer. These relationships are displayed in the Relationship tab of the objects properties dialog box.  WBS is an aid that assist Projects Admin., Project leads, and Project Managers with Organizing, managing and grouping several different projects within the same plant. Work Breakdown Structure

65. © 2006. Intergraph Corporation. All Rights Reserved. 65 Control Points Definition – A 3D object representing a point in the model – Drive label locations on orthographic drawings – Placement method: Insert Control Point Command Define in the Symbol Definition – Control point location is user defined – The position can be declared to be at a fixed global position or the positioning method can be associatively maintained. – The control point is associative to a parent object – Control Point graphics is a sphere that does not support interference detection – Control Point is displayed in Reference Geometry Aspect Control Point

66. © 2006. Intergraph Corporation. All Rights Reserved. 66 Checking Interferences SP3D provides two mode of operations: Server-based Interference checking (Database Detect). - Run on a separate IFC server - Look for all interferences for the full model Interactive interference checking (Local Detect). - Help the designer in real time - Local to a session (what you see in your workspace)

67. © 2006. Intergraph Corporation. All Rights Reserved. 67 Major Differences between the two methods: Database DetectLocal Detect Runs all the time (System Admin. choice) Works only within the current session Minimizes impact on users and improves performance Provides immediate graphical feedback (works in a dynamic mode) Creates persistent interferences that are stored in the model database Shows interferences when the pointer is idle for a brief amount of time; based on a hesitation approach Based on administrator settings (controlled by permission groups) Based on individual user settings Provides feed back on how much has been checked Checks only created and modified items Users can visualize the interferences (persistent items) Clears dynamic interferences after refreshing workspace Checking Interferences

68. © 2006. Intergraph Corporation. All Rights Reserved. 68 IFC is available in all Task Very simple and intuitive GUI Ribbon bar includes: Settings Visualization Review & Approval Checking Interferences

69. © 2006. Intergraph Corporation. All Rights Reserved. 69 Three type of checking (based on the object aspects): Required Optional Not Checked Can process: Required – Required Required – Optional Optional – Optional A clearance rule can be used Checking Interferences

70. © 2006. Intergraph Corporation. All Rights Reserved. 70 Any persistent interference detected by the Database Detect process appears as a sphere Interference detected by the Local Detect process appears as a box Local Detect Database Detect Checking Interferences

71. © 2006. Intergraph Corporation. All Rights Reserved. 71 An object’s relationship with another object become inappropriate, the system generate an Error entry in the To Do List. A relationship has changed between to object, but the person who modified the objects only have write access to one of the object. The system generate an Out of Date entry in the To Do List To Do List

72. © 2006. Intergraph Corporation. All Rights Reserved. 72 Design Re-use Unit1 Internal Relationships Maintained. External Relationship Exposed. Internal Relationships Maintained. External Relationship Exposed. Copy to Catalog or Instance in Another Location Copy to Catalog or Instance in Another Location