Download presentation
Published byChristine Bernice Morris Modified over 8 years ago
1
Phototherapy lights Shannonpatrick17, Phototherapy [photograph]. Retrieved from
2
Summary Quiz Clinical Use History Specifications
Principles of Operation Block Diagram Commercial Examples Preventive Maintenance Common Problems Test Procedures
3
Quiz What wavelengths are effective for Neonatal jaundice treatment?
Can one replace a bili-light by a fluorescence bulb?
4
Neonatal jaundice (Hyperbilirubinemia )
Clinical Use Neonatal jaundice (Hyperbilirubinemia ) 80% of premature children suffer from decreased liver functions, which builds up bilirubin in the blood Can cause long term nervous system damage
5
Janduice Meter Specifications
(2015), Jaundice Monitor [screenshot]. Retrieved from Specifications non-invasively and instantly tests transcutaneous concentration of bilirubin correlative with serum bilirubin concentration Name: Jaundice Meter Introduction: The Jaundice Meter is not only elegant in appearance, small in volume, easy and safe for operation, but also quick for examining jaundice disaster of body without any pollution to be generated in use. Application: The jaundice meter measures bilirubin transcutaneously. Jaundice meter is an accurate, non-invasive device that will assist you in management of neonatal jaundice. And transfer into bilirubin according to bilirubin list. Jaundice meter can instantaneously measure and provide an estimate of serum bilirubin levels reported in mg/dl. Display: LCD, 3 figures
6
(Hyperbilirubinemia )
Clinical Use Neonatal jaundice (Hyperbilirubinemia ) The baby sits in a basinet below the lights for 20 minutes or more Der Lange (2010), Infant undergoing bili light therapy [photograph].. Retrieved from
7
Neonatal jaundice (Hyperbilirubinemia )
Clinical Use Neonatal jaundice (Hyperbilirubinemia ) Mechanism of phototherapy: Blue-green light in the range of nm is most effective for phototherapy. The absorption of light by the normal bilirubin (4Z,15Z-bilirubin) generates configuration isomers, structural isomers, and photooxidation products. The 2 principal photoisomers formed in humans are shown. Configurational isomerization is reversible and much faster than structural isomerization. Structural isomerization is slow and irreversible. Photooxidation occurs more slowly than both configurational and structural isomerization. Photooxidation products are excreted mainly in urine. Adapted from Maisel MJ, McDonagh AD. Phototherapy for Neonatal Jaundice. N Engl J Med. 2008;358: (2015), Phototherapy for Jaundice [image]. Retrieved from
8
Principles of Operation
9-4 Fordham (2015), Wavelength [graphic]. Retrieved from
9
Principles of Operation
Bili-lights can range from fluorescent tubes to reflector type lamps with special filters to pass only the proper wavelength of light (420 nm to 490 nm) (2015), Phototherapy for Jaundice [image]. Retrieved from
10
Principles of Operation
(2004(, Phototherapy Lights [drawing]. Retrieved from
11
Controls Parameters (2013), Epilepsyu [image]. Retrieved from
12
CONTROL OF THE NEWBORN POSTITION
Diagram OPERATOR (OP) CONTROL OF THE NEWBORN POSTITION ALARM CIRCUIT ENVIROMENT TEMPERATURE MONITORING CIRCUIT NEWBORN AIR CIRCULATION SYSTEM OXYGENATOR HUMIDIFIER RESISTIVE HEATER TEMPERATURE CONTROL CIRCUIT POWER SUPPLY PANEL GENERAL SWITCH Malkin (2006) Phototherapy Lights [diagram]. Retrieved from library.ewh.org
13
Commercial Examples Bili Blanket Light sources Flourescent
Halogen with filter LED
14
Patient Safety Patients’ eyes must be protected from light
Martybugs (2008), Phototherapy[image]. Retrieved from Note: never look directly at a UV light source
15
Common Problems Broken or missing blue light bulb
Broken or missing UV lamps - Low lamp output - Loose mounts or frayed cables - Broken power cord - Broken fibres in Biliblanket and fibre optic cable if applicable. - insufficient cooling flow or blocked vent
16
Test Procedures Measure with a light meter and a filter
Measure the light output 1/2 meter (20") from the bili light opening
17
Test Procedures If a light meter is not available the following test method may be required: Check the light source by leaving your arm exposed to the light for 30 minutes The next day, that part of your skin should be tan, but not burned
18
Questions ?
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.