1. Event Processing Plugin Interface - DEMO European Communications Office Jean-Philippe Kermoal - SEAMCAT Manager (ECO) 20 November 2013 (Jean-Philippe.Kermoal@eco.cept.org)Jean-Philippe.Kermoal@eco.cept.org EUROPEAN COMMUNICATIONS OFFICE Nansensgade 19 DK-1366 Copenhagen Denmark Telephone: + 45 33 89 63 00 Telefax: + 45 33 89 63 30 E-mail: eco@eco.cept.org Web Site: http://www.cept.org/ecohttp://www.cept.org/eco

2. Jean-Philippe Kermoal / ECOPage 2 Overview EPP interface increases the visibility of this feature in the workspace Access of EPP through libraries Duplication/deletion Move up/down order of processing Harmonized button interface

3. Jean-Philippe Kermoal / ECOPage 3 DEMO 1 – Extraction of intermediary data Extraction of existing intermediary results in SEAMCAT EPP results (double and vector type) are available directly in the “Simulation result” panel

4. Jean-Philippe Kermoal / ECOPage 4 DEMO 2 – Generation of new data Calculate the Received Signal Strength at the ILR (#1106) This Event Processing Plugin allows to generate the received signal strength at the Interfering Link Receiver with or without PC (selectable from the plugin)

5. Jean-Philippe Kermoal / ECOPage 5 DEMO 3 – Extraction of existing data and generation of new data Investigate the Tx power of the interferer with or without PC Reproduce the calculation with own PC algorithm Compare results with SEAMCAT internal Tx distribution Tx data from own PC algorithm Tx data from SEAMCAT

6. Jean-Philippe Kermoal / ECOPage 6 DEMO 4 – Generate C/I, C/(N+I), (N+I)/N or I/N Ticket #1082 can be solved using EPP.

7. Jean-Philippe Kermoal / ECOPage 7 Rules The user is not allowed to modify the iRss and dRSS calculated in SEAMCAT – [yes/no]

8. Jean-Philippe Kermoal / ECOPage 8 What is left Allow edition of the plugin name Duplicate: add a number Preview to plugin (is it ok now?) Input validation (set range to input data. To be migrated to the rest of SEAMCAT GUI later on [#615-item3]) Function 2D-3D to be included (antenna pattern, spectrum mask etc...) Display: scatter diagram, plot(x,y) etc... For STG consideration: Should we identify areas in the code for plugin insertion (like propagation model), e.g. Coverage radius, simulation radius, power control algorithm etc...

9. Jean-Philippe Kermoal / ECOPage 9 Thank you - Any questions?