Download presentation
Presentation is loading. Please wait.
Published byBrett Rodgers Modified over 8 years ago
1
“LASERS” Light Amplification by the Stimulated Emission of Radiation
2
“LASERS” ….. small Tunable Diode Laser - about 2mm x 2mm chip - used to measure water vapor concentration in the near-IR - used to detect low-levels of gas concentration (ppm, ppb)
3
“LASERS” ….. Large!!! NOVA Laser at LLNL
4
“LASERS” Laser Guide Stars - VLT 8.2m telescopes - creates an artificial star at an altitude of 90 km -yellow sodium line - part of the VLT’s Adaptive Optics system
5
“LASERS” http://en.wikipedia.org/wiki/File:Lasercutting-video.ogg top: CAD model bottom: laser-cut part - 0.5mm thick stainless steel Laser Cutting http://en.wikipedia.org/wiki/File:Remote_Fibre_Laser_Welding_WMG_Warwick.ogg Laser Welding CO 2, Nd:YAG E ≈ 1MW/cm 2 f beam <.5mm carbon steel, stainless steel, aluminum, titanium
6
“LASERS” ….. History 1917--Albert Einstein describes the photon and points out that stimulated emission of light could occur. 1958--Arthur Schawlow and Charles Townes publish their theoretical paper "Infrared and Optical Masers" in Physical Review, 1958. 1960 --Theodore Maiman invents the first laser, the optical version of the maser, using a man-made ruby crystal. First operated on May 16, 1960. 1961--HeNe gas laser is invented by Ali Javan, et al., Bell Labs. -first laser to emit a continuous (CW) beam of light -first output was at 3.39 microns, in the infrared -visible output at 0.633 microns (633 nm) in 1962 -"workhorse of the laser industry“ 1963--CO 2 gas laser is invented by Patel, Bell Labs. 1964--Argon ion laser is invented by Bridges, Hughes Research Labs. 1966--Organic Dye (liquid) laser is invented. 1970's--Semiconductor lasers are run at room temperature, paving the way for their practical use today.
7
“LASERS” ….. 2010, the 50 th Anniversary! “A solution looking for a problem.” http://spie.org/media/laserplayer/laserplayer.html http://www.laserfest.org/
8
“LASERS” ….. Basic Principle Light Amplification by the Stimulated Emission of Radiation Atoms absorb energy… A population inversion is created… The atoms return to their non-energetic states by emitting radiation (“light”--UV, visible, or IR) through stimulated emission… Feedback in an optical cavity amplifies this light… Some of this light is emitted in the form of laser light!
9
“LASERS” ….. Stimulated Emission
10
“LASERS” ….. Characteristics of Laser Light
11
“LASERS”“LASERS” ….. Laser Speckle (random interference pattern)
12
"How to Make a Laser" "Gain medium (to provide for population inversion)" + "Input source of energy (electricity, light, etc.)" + "Resonant cavity (provides optical feedback and sustains stimulated emission)" “LASERS” ….. Fundamental Parts
13
“LASERS” ….. Example: The Ruby Laser The RubyLaser - Sapphire crystal doped with chromium ions ( ≈ 0.05%) - The sapphire rod has flat, polished ends coated with gold - The chromium ions absorb the input white-light and emit the laser light - Wavelength of 694 nm (ruby-red color) - Output beam is pulsed - Needs high voltage to run the flash lamp
14
“LASERS” ….. Example: The Ruby Laser
16
“LASERS” ….. Example: He-Ne Laser
19
“LASERS”“LASERS” ….. Example: Red laser pointer
20
“LASERS” Red Laser Pointer - direct output of red light from the Laser Diode (“LD”) λ = 633nm, 650nm, 670nm, etc. - output is monitored by the built-in photodiode detector (“PD”) -beam expands and is collimated by the aspheric lens “LASERS” ….. Example: Red laser pointer
21
5mW beam λ = 532 nm “LASERS” ….. Example: Green laser pointer
22
“LASERS” Diode-Pumped Solid State “DPSS laser” - 808nm (near-infrared) pump diode laser 808nm energy converted to 1064nm by the Nd:YVO 4 crystal - 1064nm energy converted to 532nm green light by the KTP crystal - this is a non-linear process called “frequency-doubling” - the input frequency is doubled, and the output wavelength is cut in half - beam is expanded - beam is collimated - beam is filtered to block the (powerful) original IR energy at 808nm “LASERS” ….. Example: Green laser pointer
23
“LASERS” – Red vs. Green Reference: “Sam’s Laser FAQ”Sam’s Laser FAQ
24
λ = 405 nm “blue” P = 150 mW λ = 532 nm “green” P=50mW “LASERS” – Red, Green and now Blue!
25
Literatura http://fp.optics.arizona.edu/Nofziger/OPTI%20200/Lecture%206b/Lasers%2001.ppsx
Similar presentations
© 2024 SlidePlayer.com. Inc.
All rights reserved.