1. PREPARED BY: PATEL MANTHAN(12ME132)
Cams and Cam Followers
PREPARED BY: PATEL MANTHAN(12ME132)
SOLANKI KISHAN(12ME102)

2. What are cams?
Cams convert rotary oscillating or linear motion into a linear or reciprocating action to carry out useful work.
The cams are classified according to :
(a) Shape,
(b) Follower movement, and
(c) Manner of constraint of the follower

3. Types of cams
Plate cam
Face cam
Cylindrical cam
End cam

4. Plate cam Sometimes called a disc, radial or edge cam.
The follower moves in a plane perpendicular to the axis of rotation of the camshaft.

5. Types of cams Sometimes called a barrel cam.
Cylindrical cam
Sometimes called a
barrel cam.
It’s curved surface has a groove machined, within which a follower is contained. The movement
is parallel to cam axis.

6. Types of cams
Face cam
Groove cut within which a constrained follower moves.
The groove ensures no need for a return spring.

7. Types of cams
End cam
The cylindrical cam has the profile machined on the end.
a rotating portion of a cylinder .
The follower translates or oscillates, whereas the cam usually rotates.

8. Types of cam follower
Wedge or Knife Type
Roller
Flat Ended

10. Types of cam follower Wedge or Knife type
It is not often used as it wears rapidly, due to the high frictional forces.
It can also track profiles in both directions.

11. Types of cam follower Roller
The advantage that wear is minimised, due to the roller action.
The profile of the cam and roller radius must not conflict.
If the profile is smaller than the radius of the roller then the roller will follow the incorrect path.

12. Flat ended This cannot be used for concave profiles.
It wears slower than a knife-edge follower, points of contact move across the surface of the follower.
These are often offset and allowed to spin.

13. CAM USE Camshaft of an Engine
The use of cam and follower systems are vital in engines, where they are used to open and close the inlet valve and the exhaust valve to the cylinder head

14. CAMSHAFT OF AN ENGINE INCORPORATING A ROCKER ARM
In this case the motion of the cam imparts on the follower is translated to the valve through a push rod and the rocker arm.

15. THE MOVEMENT TYPE IN FOLLOWER
Motion events

16. THE CAM MOTION OR PROFILE
The motion of the cam follower depends upon the profile or shape of the cam. Therefore the profile determines the resultant action.

17. Sample Video’s

18. Sample Video’s

19. Sample Video’s

20. THE END
Thank you………