3. Strategic fit Customer segmentation
Jotachar JF750 will service both the Offshore & HPI concepts:

4. The time saving solution…
Jotun is one of the world’s leading manufacturers of paints, coatings and powder coatings
Our protective coatings are protecting assets in industries such as offshore, energy, infrastructure and hydrocarbon processing
Jotachar introduces the next generation of epoxy passive fire protection
Jotachar JF750 – the only mesh free solution for jet fire scenarios
Jotachar JF750 represents a new era of mesh free PFP solutions, saving installation time, material costs and speeding up project completion
Jotachar is the time saving solution

5. Introducing a new era of mesh free epoxy PFP
Jotachar JF750 incorporates an advanced fibre matrix in the material. This technology, combined with a robust and temperature stable insulating char, eliminates the need for complex mesh reinforcement

6. The next generation of epoxy PFP
Mesh free for hydrocarbon pool and jet fire scenarios
Less complexity reduces risk
Reduces installation time by up to 40%

8. Jotachar JF750 versus Traditional Epoxy PFP Substantial savings on installed material cost
*Based on a typical 6,000m2 project:
60 minute jet fire scenario
Jotachar JF750 – no mesh, no installation cost
23% total cost saving on this example

9. Mesh Free PFP Less risk. Less complex.
No complex certification rules to follow
No mesh depth or overlap rules to fulfil
No measuring, no cutting, no installing
No detachment on overlaps
No PFP detachment from mesh
No risk of water ingress at mesh terminations
Easier to upgrade pool fire areas to jet fire
Easier to repair and maintain

10. Mesh Free PFP Meets the industry’s most rigorous standards
ISO Jet Fire Certification
ISO 834-3/BS476 Hydrocarbon Fire Test for structures and ‘H’ class divisions
Compliant with NORSOK M-501 Revision 6 for durability
Resistant to blast – tested to 4 bar over pressure
Approved to UL1709 – 45 to 240 minutes fire protection
Classification Society recognition by: Lloyd’s Register, Det Norske Veritas, ABS & BV

11. Fully tested and compliant to NORSOK M-501 Revision 6
ISO 20340: Cyclic Durability Testing
ISO 4624: Adhesion Testing
ISO : Degradation of coatings
ISO 874/BS 476 Part 21
Water absorption
“NO REDUCTION IN FIRE PERFORMANCE AFTER ISO CYCLICAL TESTING”

12. Up to 60% reduction in application time for 60 minute fire scenarios*
Reduce application time and costs
Increase productivity
Reduce installer down time on site
Faster project completion
Ease of application with two component heated plural spray unit
Easy 1:1 mixing ratio

13. A unique time saving offer from Jotun
Mesh free
epoxy PFP for
jet fire
protection
Significant
reduction in
installation
man hours
Potential
one coat for
30 or 60 min
jet fire scenarios
Risk free
Installation.
No need
for complex
mesh
Saving
project
installation costs