1. G1000 Simulator1 Using the G1000 Sim Ted Spitzmiller

2. G1000 Simulator2 Value of the G1000 Simulator View & navigate virtually all screens and modes Create and fly any route –Initiate at any point in the US Integrate AP into the flight environment Simulate failures Down side –Requires the minimum PC config –May disengage AP when PC overloaded –Must use the cursor and mouse –“Flight” with yoke not dynamic

3. G1000 Simulator3

4. 4 Calibrate “Joy Stick” (Yoke) Axis

5. G1000 Simulator5 Select Desired Control Verify proper movement (use invert where necessary)

6. G1000 Simulator6 Throttle Only Controls Tach Values from 200 to 2700

7. G1000 Simulator7 Airspeed will max at 200 kts with full power Airspeed will not vary with pitch Airspeed varies with power 1950 RPM gives 140 kts

8. G1000 Simulator8 Selecting the Demo Mode

9. G1000 Simulator9 Select Group

10. G1000 Simulator10 MANUAL TRK FPL TRK FPL+V Select TRK MODE Use TRK FPL for Auto Fly Use MANUAL with Yoke

11. G1000 Simulator11 Establish Initialization point

12. G1000 Simulator12 Uses of the Sim Orientation to Features Create and fly complete flight plans Fly selected scenarios

13. G1000 Simulator13 Scenario Task List Initial Setup Fill-in-the blank questions

14. G1000 Simulator14 Creating Scenarios Each Task on the list is keyed to a point on the MFP

15. G1000 Simulator15 Failure Modes

16. G1000 Simulator16 Select the Failure from the list and “Apply”

17. G1000 Simulator17 Affect of failed Item

18. G1000 Simulator18 Air Data Failure— “Plane” still flies

19. G1000 Simulator19 Note loss of “DME” when GPS fails

20. G1000 Simulator20 Make your “flight time” more productive… use the sim to enhance your knowledge of the G1000 functions and features