1. The EM and Visible Spectra

2.  Electromagnetic (EM) waves are waves caused by oscillations occurring simultaneously in electric and magnetic fields  A 2D transverse wave  They DO NOT require any medium in order to propagate  As energy increases, frequency increases  This is DIFFERENT than mechanical waves in which increases energy increases amplitude

3.  Gamma Rays  High energy radiation that comes from nuclear decay process  Uses: cancer treatment, sterilization  X-Rays  Penetrates soft tissue  Uses: medical imaging, airport security, telescopes  Ultraviolet  Causes damage to skin tissue  Uses: sun tans, preventing currency forgery, sterilization

4.  Visible Light  Frequencies than stimulate the retina of the human eye: 400 nm (violet) – 700 nm (red)  Uses: seeing, lasers, CD and DVD players, printers  Infrared  Radiation associated with heat  Uses: remote controls, heal injuries, thermal imaging  Microwaves  Uses: cooking, cell phones, radar, speed cameras  Radio Waves  Uses: various forms of communication

6.  Light travels in straight lines in a uniform medium or a vacuum  Our eyes will ALWAYS assume light has traveled in a straight line to reach our eyes  All EM waves travel at the same speed  c = 3.00 x 10 8 m/s  Galileo hypothesized that light has a finite speed  Ole Roemer quantifies speed of light in 1676 using the orbital period of Io (Jupiter's moon)

7.  Light is kind of weird  It acts like as an EM wave  And it acts like a stream of particles (photons)  Light is the only thing we can actually see  Visible light is a small portion of the EM spectrum

8.  Light can propagate in a straight line (lasers)  Light is emitted in “packets” of energy called photons  Each photon is a particle-like packet with a discrete (quantum) amount of energy  Higher intensity light (brighter) means more photons  Higher frequency light means that each photon carries more energy

9.  Light demonstrates the wave properties we’ve been talking about in the unit.  Light waves are reflected  In regular (specular) reflection, incident light rays are parallel to each other and reflect parallel to each other  Remember the law of reflection!  Angle of incidence = angle of reflection

10.  Diffuse reflection occurs when light is scattered when it reflects off a surface  At a microscopic level, most surfaces are very rough

11.  Light also bends when it enters a new medium  For example, light travels faster in air than in water, so this pencil looks broken  Also what causes mirages

12. The girl sees the boy’s foot closer to the surface than it actually is. If the boy looks down at his feet, will they seem closer to him than they really are? No! He is looking straight down and not at an angle. There is no refraction for him. Air (20°C)

17.  The critical angle is the angle of incidence in the more optically dense medium at which the angle of refraction in the less optically dense medium is exactly 90°.

18.  Total internal reflection occurs when light falls on a surface of a less optically dense medium at an angle of incidence equal to or greater than the critical angle of the substance.  There is no refracted ray; occurs at critical angle.  Only occurs when a light ray passes from a more optically dense substance into a less optically dense substance.  The principle behind fiber optics and binoculars

19.  Light can also be diffracted, meaning it bends around edges and barriers:

20.  You can polarize light by making it vibrate in only one plane, not 2 like it usually does  Used in sunglasses  This cuts down the intensity of light  2 polarizing materials places at 90° angles will block out all light

21.  Luminous bodies emit light (i.e. – the Sun)  Luminous Flux (P) is the rate at which visible light is emitted from a source  Units: Lumen (lm)  A typical 100 W light bulb emits ~1750 lm  Illuminated bodies are actually reflecting light from another source (i.e. – the Moon)  Illuminance (E) is the rate at which light falls on a surface  Units: Lumens per square meter (lm/m 2 ) = Lux (lx)  Area used is that of a sphere 4 π r 2  Luminous Intensity (I) is the luminous flux that falls on 1 m 2 area 1 meter from a source  Units: Candela (cd) – “candle power”