2. About company Kurgankhimmash is the leading Russian company manufacturing process equipment for oil & gas producing, oil & gas refining, chemical, energy, metallurgic, machinery, medical and other industries. Apart from manufacturing products our company develops technologies for various processes, conducts design, installation, supervision installation and start-up works. Equipment types:  compressor equipment  vessel equipment  heat exchanger equipment  dividing, separation, filtration equipment  vertical tanks, of capacity up to 100 000 m 3  natural gas treatment units  methanol injection & recovery units, TEG, DEG  associated oil & gas disposition units  three phase direct heated automatic control separation units(NGVRP like «Heater-treater»)  pipeline pig launchers & receivers  oil pipeline mud filters  gas pipeline dust catchers  tower equipment  ozonator equipment  air driers, air receivers

3. Modular compressor stations Kurgankhimmash LLC manufactures modular compressor equipment to compress various gases on the basis of reciprocating and screw compressors. Equipment applies in oil & gas extracting, oil & gas refining, energy and other industries. Modular compressor stations (MCS) are used to compress various gases: atmospheric air, nitrogen, dry nitrogen, oil associated gas, flare gas, dry stripped gas, natural gas, propylene, ethylene, hydrogen, propane, methane, argon and others. Modular compressor stations (MCS) feature autonomous and fully automatic stations operated at temperature from - 60 °С tо +50 °С. Stations are constructed as welded panel heated enclosures fitted for transportation by different transport to any distance. Compressor stations may be supplied with quick-mounting hangars if required. Stations are fitted with noise and heat insulation, all utilities in accordance with applicable regulations.

4. Supplied equipment Packaged equipment Oil gas water separators Oil & gas separatorsElectrical dehydrators

5. Supplied equipment Heat exchangers Gas drier absorbersTowers Oil storage tanks

6. Process capabilities MODULAR COMPRESSOR STATIONS injection pressure up to 53,8 MPа power up to 6 MW actuator – electric engine, gas reciprocating engine VESSEL EQUIPMENT diameter up to 3 600 mm operating pressure up to 16 МPа capacity up to 250 m 3 weight up to180 t STEEL VERTICAL TANKS; roll & sheet assembly capacity from 100 to 100 000 m 3 SEPARATION & TOWER EQUIPMENT diameter up to 3 600 mm length up to 65 000 mm capacity up to 250 m 3 weight up to 180 t HEAT EXCHANGER EQUIPMENT diameter up to 3 600 mm length up to 40 000 mm weight up to 180 t

7. Compressor units Reciprocating Ariel Single screw Vilter Double screw LeROI Balance Bearing life High pressure ratio World leader Many configurations from commercial components Limited distribution network Ease of service Typical design Designed to compress hydrocarbon gases

8. Screw compressor units 8

9. Reciprocating compressor units Since 2011 company Kurgankhimmash is the authorized Ariel packager.

10. Stations manufacture Assembly shop area- 6 000 m 2 Natural gas supply system Frequency converters 380 V and 6 kV Four welding stations X-ray bench Hydrotest bench Plant tests

11. Certificates

12. Our customers

13. Thank you for watching!