1. I/M Solutions Conference
SAE Standards Update
I/M Solutions Conference
April 29, 2014
Bob Gruszczynski

2. SAE J3005 Permanently and Semi-permanently installed diagnostic communication devices
Joakim Pauli

3. Status Ballot August 2013, negative votes and many comments.
Document updated, ready for ballot
Note: Recommendations only, no requirements.

4. Use cases Remote OBD PEMS Split-cables WLAN interfaces
Insurance devices
GPS

5. Next step (after ballot)
Revision to include updated information from stakeholders?
New part for enhanced diagnostics

6. Report to E E System Diagnostic Standards Committee
SAE J1699
Task Force report to
Report to E E System Diagnostic Standards Committee
April 7, 2014
J was last published in June of 2006.
J was originally named “OBD II Related SAE Specification Verification Test Procedures” and was last published in Jan. of That document contained two test cases, which will be incorporated into the new document with the expanded scope.

7. SAE J1699 Task Forces J1699-1 (No Activity) J1699-2 J1699-3
SAE J1850 Verification Test Procedures
J1699-2
Test Cases For OBD-II Scan Tools and I/M Test Equipment
J1699-3
OBD II Compliance Test Cases
J (New)
OBD II Communication Anomaly List
J was last published in June of 2006.
J was originally named “OBD II Related SAE Specification Verification Test Procedures” and was last published in Jan. of That document contained two test cases, which will be incorporated into the new document with the expanded scope.

8. J Overview
Test Cases For OBD-II Scan Tools and I/M Test Equipment
Being updated to specify OBD II compliance test cases for Scan Tools and I/M Equipment (like a mirror image of J1699-3)
Will cover all past and present OBD II protocols
ETI, Scan Tool and I/M manufacturers, and OEM’s providing specific testing scenarios based on field experience.

9. J Status
Document
Test cases for network initialization are defined
Simple message validation checks have been defined for ISO , ISO , ISO , J1850 VPW, and J1850 PWM
200 pages long; containing 192 test cases
Document structure allow for additional expansion in the future
Added test cases that were removed from ISO
Final clean-up in preparation for ballot
Latest draft posted on the SAE website is dated 9/13/2013
Look for a ballot within the next couple of months

10. J Status
Next meeting
May. 9, 2014 from 3:00p.m. to 4:30p.m. (EST) at SAE in Troy, MI (WebEx is available)

11. J1699-3 Overview OBD II Compliance Test Cases
OBD II compliance test cases for vehicles to validate J1979 messages and content
Revision 14.6 published in May 2012
Items recently addressed:
Heavy Duty ISO has been added to the latest document (V14.92)
Minor bug fixes

12. J1699-3 Status Document Software
Draft revision posted on SAE website in Feb. 2014
Will be balloted within the next couple of months
Software
Latest on SourceForge is V , dated 3/13/2014
Corresponds to of the J document
Next update is planned for late May

13. J1699-3 Status Future Changes Next meeting
Updates from recent J1979 ballot
Support for India OBD
Next meeting
May. 9, 2014 from 1:00p.m. to 3:00p.m. (EST) at SAE in Troy, MI (WebEx is available)

14. J1699-4 Overview OBD II Communication Anomaly List
Informational Report that provides a list of anomalies found in the field (input from ETI, OEMs)
Where possible, the Informational Report also provides direction for Scan Tool Manufacturers
Originally balloted in October 2011 had two disapprovals
Re-balloted in December 2013
Passed and published
No further meetings have been scheduled
If there is new material the document can be opened for update

15. E/E Diagnostics Committee Meeting
J1979 Update
E/E Diagnostics Committee Meeting
April 7, 2014
Paul Baltusis

16. Changes to SAE/ISO Documents – J1979
Currently published documents:
J1979_ E/E Diagnostic Test Modes (Feb 23, 2012)
J1979DA_ Digital Annex of E/E Diagnostic Test Modes (Oct 10, 2011)
ISO has the same document content with the exception of the Annexes. It refers to the J1979DA (Digital Annex).
CARB LEV III OBD changes reference the latest J1979DA
J1979/J1979DA affirmation ballot closed March 3, Document will be published within a few months. Publication will include an excel version of the DA document.
J1979 Committee has quarterly meetings scheduled at SAE Troy:
Feb 14, 2014
May 9, 2014
Aug 15, 2014
Dec 12, 2014

17. J1979 Document Updates
Update conditions where data not available – request message supported but cannot be completed within P2 timing. (It takes a few seconds to clear NVRAM). For Service $04, the use of negative response code $78 is limited to a duration of 5 sec before a positive response is required. Multiple responses are allowed.
Clarify proper responses for all services in Table 10 and 11. Negative responses are not allowed for any services except for initialization, clearing DTCs and CVN, in some limited circumstances.
Added examples for recently added Service $09 InfoTypes (e.g., ESN, EROTAN, FEOCNTR).
Corrected minor typos/language.

18. J1979DA Document Change Summary
Update engine schematic to include diesel aftertreatment and EGR.
Updated Fuel System definition to handle dual fuel systems.
Updated PID $1C definitions (OBD Requirements)
Update RUNTIM ($1F, $4D, $4E) to match new “propulsion system active” definition.
Updated FUEL_TYPE ($51) to simplify implementation and removed electric vehicles.
Updated FUEL_RATE ($5E) to specify update rate.
Add “Recommended gear” to PID $65.
Clarified language in EGR PID $69.
Add HEV data PID $9A (EPA requirement).
Add DEF reagent quality sensor PID $9B.
Add new FUEL_RATE ($9D) for PEMS.
Add Exhaust Flow Rate ($9E) for PEMS.
Add fuel split ($9F) for dual fuel systems.
Add corrected NOx sensor PID $A1
Add cylinder fuel rate PID $A2
Add new scaling bytes ($42, $43, $91, $92, $97, $98, $FB)

19. J1979DA Document Change Summary
Obtaining VIN, CALID and CVN from the network; what to display if data not available - ? for VIN and CALID, $00 for CVN
Add several ECU names.
Add Fueled Engine Operation Ignition Cycle Counter (InfoType $12) for hybrids (CARB requirement)
Add Miles Since Evap Monitoring Decision (InfoType $14) for all vehicles (EPA requirement)
Deleted from draft, no longer under consideration
“Easter Egg” to allow vehicle to enter dyno mode.
Service $09 Battery DTC and location.

20. E/E Diagnostics Committee Meeting
J1978 Update
E/E Diagnostics Committee Meeting
April 7, 2014
Bob Gruszczynski

21. Changes to SAE/ISO Documents - J1978
ISO balloted
SAE team working closely with ISO team to keep documents common
Next version of document will be based on ISO document
Next J1978 meeting 23 April to review current updates
Next ISO meeting 1-4 April in Troy, MI and will discuss J1978 proposed updates
March 4, 2014
SAE International

22. Changes to SAE/ISO Documents - J1978
Nov-06
Feb-07
Apr-07
Oct-07
Apr-08
Oct-08
Apr-09
Nov-09
Apr-10
Jun-10
Oct-10
Apr-11
Jul-11
Oct-11
Apr-12
Nov-12
Apr-13
Nov-13
14-Apr
New 94 88
182
165
276
162
109
179
146 41 50
282 78 52
105
275
272
232
253
Revised 39 21 60 16 23
407
295 54 90 12 6 7 45 28 53 62
Denied 71
112
132
177
129 - 24 70
180
159
113
172 86
800
154
SAE P-type Codes Possible: 11,160
SAE P-type Codes Used: 6189
SAE P-type Codes Remaining: 4971
FTB sub types available: 127
SAE P-Type Tables: 44
Remaining P-Type Tables: 17
Manf. P-Type Tables: 16+4
Manf. P-Type Available: 5120
March 4, 2014
SAE International