1. PHYLOGENETIC ANALYSIS

2. Phylogenetics Phylogenetics is the study of the evolutionary history of living organisms using treelike diagrams to represent pedigrees of these organisms. The tree branching patterns representing the evolutionary divergence are referred to as phylogeny.

3. Studying phylogenetics Fossil records – morphological features, available only for certain species, data can be fragmentary, morphological traits are ambiguous, fossil record nonexistent for microorganisms Molecular data (molecular fossils) – more numerous than fossils, easier to obtain, favorite for reconstruction of the evolutionary history http://www.agiweb.org/news/evolution/fossilrecord.html

4. Tree of life http://tikalon.com/blog/blog.php?article=2011/domains

5. Tree of life revised (2016) http://www.nature.com/articles/nmicrobiol201648 http://www.nytimes.com/2016/04/12/science/scientists-unveil-new-tree-of-life.html?_r=0

6. DNA sequence evolution -3 mil yrs -2 mil yrs -1 mil yrs today AAGACTT TGGACTTAAGGCCT AGGGCATTAGCCCTAGCACTT AAGGCCTTGGACTT AGCGCTTAGCACAATAGACTTTAGCCCAAGGGCAT www.cs.utexas.edu/users/tandy/CSBtutorial.ppt

7. Tree terminology Ancestral node or root of the tree Internal nodes or Divergence points (represent hypothetical ancestors of the taxa) Branches Terminal nodes – taxa (taxon) A B C D E Based on lectures by Tal Pupko

8. Monophyletic (clade) – a taxon that is derived from a single ancestral species. Polyphyletic – a taxon whose members were derived from two or more ancestors not common to all members. Paraphyletic – a taxon that excludes some members that share a common ancestor with members included in the taxon. Based on lectures by Tal Pupko

9. dichotomy – all branches bifurcate, vs. polytomy – result of a taxon giving rise to more than two descendants or unresolved phylogeny (the exact order of bifurcations can not be determined exactly)

10. unrooted – no knowledge of a common ancestor, shows relative relationship of taxa, no direction of an evolutionary path rooted – obviously, more informative

11. Finding a true tree is difficult

13. Rooting the tree A B C Root D A B C D Note that in this rooted tree, taxon A is no more closely related to taxon B than it is to C or D. Rooted tree Unrooted tree To root a tree mentally, imagine that the tree is made of string. Grab the string at the root and tug on it until the ends of the string (the taxa) fall opposite the root: Based on lectures by Tal Pupko

14. Now, try it again with the root at another position: A B C Root D Unrooted tree Note that in this rooted tree, taxon A is most closely related to taxon B, and together they are equally distantly related to taxa C and D. C D Root Rooted tree A B Based on lectures by Tal Pupko

15. The unrooted tree 1: AC B D Rooted tree 1d C D A B 4 Rooted tree 1c A B C D 3 Rooted tree 1e D C A B 5 Rooted tree 1b A B C D 2 Rooted tree 1a B A C D 1 These trees show five different evolutionary relationships among the taxa! An unrooted, four-taxon tree theoretically can be rooted in five different places to produce five different rooted trees Based on lectures by Tal Pupko

16. Rooting the tree outgroup – taxa (the “outgroup”) that are known to fall outside of the group of interest (the “ingroup”). Requires some prior knowledge about the relationships among the taxa. The outgroup can either be species (e.g., birds to root a mammalian tree) or previous gene duplicates (e.g.,  -globins to root  -globins). outgroup Based on lectures by Tal Pupko

17. Rooting the tree midpoint rooting approach - roots the tree at the midway point between the two most distant taxa in the tree, as determined by branch lengths. Assumes that the taxa are evolving in a clock-like manner. A B C D 10 2 3 5 2 d (A,D) = 10 + 3 + 5 = 18 Midpoint = 18 / 2 = 9 Based on lectures by Tal Pupko

18. Molecular clock This concept was proposed by Emil Zuckerkandl and Linus Pauling (1962) as well as by Emanuel Margoliash (1963). For every given gene (or protein), the rate of molecular evolution is approximately constant. Pioneering study by Zuckerkandl and Pauling They observed the number of amino acid differences between human globins – β and δ (~ 6 differences), β and γ (~ 36 differences), α and β (~ 78 differences), and α and γ (~ 83 differences). They could also compare human to gorilla (both β and α globins), observing either 2 or 1 differences respectively. They knew from fossil evidence that humans and gorillas diverged from a common ancestor about 11 MYA. Using this divergence time as a calibration point, they estimated that gene duplications of the common ancestor to β and δ occurred 44 MYA; β and derived from a common ancestor 260MYA; α and β 565 MYA; and α and γ 600MYA.

19. Gene phylogeny vs. species phylogeny Main objective of building phylogenetic trees based on molecular sequences: reconstruct the evolutionary history of the species involved. A gene phylogeny only describes the evolution of that particular gene or encoded protein. This sequence may evolve more or less rapidly than other genes in the genome. The evolution of a particular sequence does not necessarily correlate with the evolutionary path of the species. Branching point in a species tree – the speciation event Branching point in a gene tree – which event? The two events may or may not coincide. To obtain a species phylogeny, phylogenetic trees from a variety of gene families need to be constructed to give an overall assessment of the species evolution.

20. Closest living relatives of humans? Based on lectures by Tal Pupko

21. Closest living relatives of humans? Humans Bonobos Gorillas Orangutans Chimpanzees MYA 0 15-30 MYA Chimpanzees Orangutans Humans Bonobos Gorillas 0 14 Mitochondrial DNA, most nuclear DNA- encoded genes, and DNA/DNA hybridization all show that bonobos and chimpanzees are related more closely to humans than to gorillas. The pre-molecular view was that the great apes (chimpanzees, gorillas and orangutans) formed a clade separate from humans, and that humans diverged from the apes at least 15-30 MYA.

22. Orangutan GorillaChimpanzee Human From the Tree of the Life Website, University of Arizona

23. Forms of tree representation phylogram – branch lengths represent the amount of evolutionary divergence cladogram – external taxa line up neatly, only the topology matters

24. Based on lectures by Tal Pupko ((A,(B,C)),(D,E)) = The above phylogeny as nested parentheses Taxon A Taxon B Taxon C Taxon E Taxon D No meaning to the spacing between the taxa, or to the order in which they appear from top to bottom. This dimension either can have no scale (for ‘cladograms’), can be proportional to genetic distance or amount of change (for ‘phylograms’), or can be proportional to time (for ‘ultrametric trees’ or true evolutionary trees). These say that B and C are more closely related to each other than either is to A, and that A, B, and C form a clade that is a sister group to the clade composed of D and E. If the tree has a time scale, then D and E are the most closely related.

25. Newick format

26. A consensus tree combining the nodes: strict consensus - all conflicting nodes are collapsed into polytomies majority rule – among the conflicting nodes, those that agree by more than 50% of the nodes are retained whereas the remaining nodes are collapsed into polytomies

27. How to build a phylogenetic tree 1. Choice of molecular markers 2. Multiple sequence alignment 3. Choice of a model of evolution 4. Determine a tree building method 5. Assess tree reliability

28. Choice of molecular markers Nucleotide or protein sequence data? NA sequences evolve more rapidly. They can be used for studying very closely related organisms. e. g., for evolutionary analysis of different individuals within a population, noncoding regions of mtDNA are often used. Evolution of more divergent organisms – either slowly evolving NA (e.g., rRNA) or protein sequences. Deepest level (e.g., relatioships between bacteria and eukaryotes) – conserved protein sequences

29. Positive and negative selection

30. MSA Critical step Multiple state-of-the-art alignment programs (e.g., T- Coffee, Praline, Poa, …) should be used. The alignment results from multiple sources should be inspected and compared carefully to identify the most reasonable one. Automatic sequence alignments almost always contain errors and should be further edited or refined if necessary – manual editing! Rascal and NorMD can help to improve alignment by correcting alignment errors and removing potentially unrelated or highly divergent sequences.

31. Model of evolution A simple measure of the divergence of two sequences – number of substitutions in the alignment, a distance between two sequences – a proportion of substitutions If A was replaced by C: A → C or A → T → G → C? Back mutation: G → C → G. Parallel mutations – both sequences mutate into e.g., T at the same time. All of this obscures the estimation of the true evolutionary distances between sequences. This effect is known as homoplasy and must be corrected. Statistical models infer the true evolutionary distances between sequences.

32. Models of NA evolution Transition: YY, RR Transversion: YR, RY

33. Models of amino acids substitutions

34. Among site variations Up to now, we have assumed that different positions in a sequence are assumed to be evolving at the same rate. However, in reality this may not be true. In DNA, the rate of substitution differs for different codon positions. 3 rd codon mutates much faster. In proteins, some AAs change more often than others owing to functional constraints. It has been shown that there are always a proportion of positions in a sequence dataset that have invariant rates and a proportion that have more variable rates.

35. Gamma distribution The distribution of variant sites follows a Gamma distribution pattern.

37. Tree building methods Two major categories. Distance based methods. Based on the amount of dissimilarity between pairs of sequences, computed on the basis of sequence alignment. Clustering by UPGMA, neighbor joining Characters based methods. Use the aligned characters, such as DNA or protein sequences, directly during tree inference. Taxa Characters Species AATGGCTATTCTTATAGTACG Species BATCGCTAGTCTTATATTACA Species CTTCACTAGACCTGTGGTCCA Species DTTGACCAGACCTGTGGTCCG Species ETTGACCAGTTCTCTAGTTCG Maximum parsimony (MP), Maximum likelihood (ML)

38. Distance based methods Calculate evolutionary distances d AB between sequences using some of the evolutionary model. Construct a distance matrix – distances between all pairs of taxa. Based on the distance scores, construct a phylogenetic tree. clustering algorithms – UPGMA, neighbor joining (NJ)

39. Clustering methods UPGMA (Unweighted Pair Group Method with Arithmetic Mean) Produces rooted tree (most phylogenetic methods produce unrooted tree). Basic assumption of the UPGMA method: all taxa evolve at a constant rate, they are equally distant from the root, implying that a molecular clock is in effect. However, real data rarely meet this assumption. Thus, UPGMA often produces erroneous tree topologies.

40. Neighbor joining B D A C E A D C E B A,B B D A C E ABCDE A02344 B0345 C034 D05 E0 CDE 02.54.53.5 C034 D05 E0 The Minimum Evolution (ME) criterion: in each iteration we separate the two sequences which result with the minimal sum of branch lengths

41. Optimality based methods Clustering methods produce a single tree. There is no criterion in judging how this tree is compared to other alternative trees. Optimality based methods have a well-defined algorithm to compare all possible tree topologies and select a tree that best fits the actual evolutionary distance matrix.

42. Clustering based – pros and cons Fast, can handle large datasets Not guaranteed to find the best tree UPGMA – assumes a constant rate of evolution of the sequences in all branches of the tree (molecular clock assumption) NJ – does not assume that the rate of evolution is the same in all branches of the tree NJ is slower but better than UPGMA

43. Character based methods Also called discrete methods Based directly on the sequence characters They count mutational events accumulated on the sequences and may therefore avoid the loss of information when characters are converted to distances. Evolutionary dynamics of each character can be studied The two most popular character-based approaches: maximum parsimony (MP) and maximum likelihood (ML) methods.

44. Maximum parsimony Choose tree that minimizes number of changes required to explain data Based on Occam’s razor. William of Occam, 13 th century. The simplest explanation is probably the correct one. This is because the simplest explanation requires the fewest assumptions and the fewest leaps of logic. A tree with the least number of substitutions is probably the best to explain the differences among the taxa under study.

45. 123456789 1AAGAGTGCA 2AGCCGTGCG 3AGATATCCA 4AGAGATCCG To save computing time, only a small number of sites that have the richest phylogenetic information are used in tree determination. informative site – sites that have at least two different kinds of characters, each occurring at least twice A worked example

46. To save computing time, only a small number of sites that have the richest phylogenetic information are used in tree determination. informative site – sites that have at least two different kinds of characters, each occurring at least twice 123456789 1AAGAGTGCA 2AGCCGTGCG 3AGATATCCA 4AGAGATCCG A worked example

47. How many possible unrooted trees? 123 1GGA 2GGG 3ACA 4ACG 1 2 3 4 1 3 2 4 1 4 3 2 Tree ITree IITree III

48. GGAA G G A A G A G A G A A G A G G G GG Tree I Tree II Tree III 1 2 3 4 1 3 2 4 1 4 3 2

49. GGCC G G C C G C G C G C C G C G G G GG Tree I Tree II Tree III

50. AGAG A G A G A A G G A G A G A A G A GG Tree I Tree II Tree III

51. IIIIII GGAA122 GGCC122 AGAG212 Tree length456 GGA GGG ACA ACG ACA GGA Tree I 2 1 1

52. Weighted parsimony The parsimony method discussed so far is unweighted because it treats all mutations as equivalent. This may be an oversimplification; mutations of some sites are known to occur less frequently than others, for example, transversions versus transitions, functionally important sites versus neutral sites. A weighting scheme takes into account the different kinds of mutations.

54. Branch-and-bound The parsimony method examines all possible tree topologies to find the maximally parsimonious tree. This is an exhaustive search method, expensive. N = 10 … 2 027 025 N = 20 … 2.22 × 10 20 Branch-and-bound Rationale: a maximally parsimonious tree must be equal to or shorter than the distance-based tree. First build a distance tree using NJ or UPGMA. Compute the minimum number of substitutions for this tree. The resulting number defines the upper bound to which any other trees are compared. i.e., when you build a parsimonous tree, you stop growing it when its length exceeds the upper bound.

55. Heuristic methods When a number of taxa exceeds 20, even branch-and- bound becomes computationally unfeasible. Then, heuristic search can be applied. Both exhaustive search and branch-and-bound methods lead to the optimum tree. Heuristic search leads to the suboptimum tree (compare to BLAST which is also heuristic).

56. MP – pros and cons Intuitive - its assumptions are easily understood The character-based method is able to provide evolutionary information about the sequence characters, such as information regarding homoplasy. It tends to produce more accurate trees than the distance- based methods when sequence divergence is low. When sequence divergence is high, tree estimation by MP can be less effective. Estimation of branch lengths may also be erroneous because MP does not employ substitution models to correct for multiple substitutions.

57. Maximum likelihood – ML Under a model of sequence evolution, find the tree which gives the highest likelihood of the observed data. ML is an exhaustive method that searches every possible tree topology and considers every position in an alignment, not just informative sites. By employing a particular substitution model that has probability values of residue substitutions, ML calculates the total likelihood of ancestral sequences evolving to internal nodes and eventually to existing sequences. It sometimes also incorporates parameters that account for rate variations across sites.

58. ML – pros and cons Based on well-founded statistics instead of a medieval philosophy. More robust, uses the full sequence information, not just informative sites. Employs substitution model – strength, but also weakness (choosing wrong model leads to incorrect tree). Accurately reconstructs the relationships between sequences that have been separated for a long time. Very time consuming, considerably more than MP which is itself more time consuming than clustering methods.

59. Phylogeny packages PHYLIP, Phylogenetic inference package evolution.genetics.washington.edu/phylip.html Felsenstein Free! PAUP, phylogenetic analysis using parsimony paup.csit.fsu.edu Swofford