Download presentation
Presentation is loading. Please wait.
Published byMaximilian Russell Modified over 8 years ago
1
Status of the rt CH-cavity - Anja Seibel -
2
Outline CH-Cavity CH-Parameter Heat distribution Cooling concept Final CH-Cavity First measurement results 02.10.2013Anja Seibel2
3
CH-Cavity 02.10.2013Anja Seibel3
4
the CH-Cavity consists of 5 gaps with an operating frequency of 175 MHz the cavity has a diameter of about 770 mm (665,4 mm Tank inner diameter) and a length of 463 mm (383 mm Tank inner length) CH-Cavity 02.10.2013Anja Seibel4 21 mm 30 mm34 mm 24 mm 463 mm 770 mm
5
02.10.2013Anja Seibel5 1 Inductive input coupler 4 Pick ups 2 Tuners 1 Vacuum pump port 1 2 3 4 CH-Cavity
6
02.10.2013Anja Seibel6 The tuning is done by two cylindrical tuners. One is adjustable in height (80 mm) and one is static
7
02.10.2013Anja Seibel7 CH-Cavity 220 mm Dyn. Tuner [mm]160220240 Frequency [MHz]176.0175.3174.6
8
CH- Parameter 02.10.2013Anja Seibel8 ParameterUnitValue Gaps5 FrequencyMHz175 Tank lengthmm383 Tank diametermm665.4 Aperture diametermm24 Effective VoltagekV325 Q-Factor14000 Shunt impedanceM Ω /m80 LosseskW5
9
Heat distribution 02.10.2013Anja Seibel9 rf current density distributiontemperature distribution
10
Cooling concept 02.10.2013Anja Seibel10 Cooling concept for the drift tubes and the stems
11
02.10.2013Anja Seibel11 Cooling concept
12
02.10.2013Anja Seibel12 Cooling concept Cooling concept for the tank: 16 cooling channels with a diameter of 10 mm
13
Final CH-cavity 02.10.2013Anja Seibel13
14
Final CH-cavity 02.10.2013Anja Seibel14
15
Final CH-cavity 02.10.2013Anja Seibel15
16
Final CH-cavity 02.10.2013Anja Seibel16
17
First measurement results 02.10.2013Anja Seibel17 Dyn. Tuner [mm]160220240 Frequency [MHz]175.7175.1174.5 Dyn. Tuner [mm]160220240 Frequency [MHz]176.0175.3174.6 Measurement Simulation
18
Electrical field profile 02.10.2013Anja Seibel18 First measurement results SimulationMeasurement
19
02.10.2013Anja Seibel19 Thanks for your attention!
Similar presentations
© 2024 SlidePlayer.com. Inc.
All rights reserved.