1. Product Sheet www.sensmaster.net sales@sensmaster.net SensMaster 18M, PJU 5/20c, The Strand 47810 Kota Damansara, Malaysia Phone: +60 3 2106 2590 Fax: +60 3 6142 6076 Rev 105 Part No. TM801-200 For variants, see below. Samui Small asset tracking and security tag The Samui is a small-sized active identification tag for tracking and security purposes. The Samui™ has a flanged enclosure that can easily be fixed to various types of assets. Its weight is less than 25g. The tag uses the 2.4 GHz ISM band and has a range of up to 80 metres. The Samui can be configured to beacon mode (TTF) or wake-up mode (RTF). In beacon mode, the tag will send its UID in regular intervals, or immediately upon alert conditions. In wake-up mode the tag will not send anything unless commanded by an authorised reader, which for instance is useful for air- transportation. The optional motion sensor can be programmed for multiple uses, including reducing activity when the tag is stationary, detect unwanted movements and detecting shocks. The Samui is intended to be used together with TM700 series RFIDS™ readers. Key features  Small size  Easy to fix to most assets  Configurable radio modes  Replaceable battery  Secure wireless configuration  Option: motion sensor, expanded memory Communication range to reader Configuration range Operation frequencies Dimensions / Weight Operating temperature Output power Battery Encapsulation EPC and user memory Update interval Compliance Variants: TM801-200 TM801-201 TM803-200 Up to 60 metres (200 feet) 10 metres (30 feet) 2.4-2.5 GHz ISM, GFSK, Frequency Hopping 40 × 29 × 13 mm (excluding flanges) / 25 g -20°C to +70°C (-4°F to 160°F) Max 1 mW, 0 dBm EIRP Replaceable Lithium cells IP54 128 bits EPC, 18 bytes user Configurable from 1 – 1000 seconds with 1 second at alert CE, FCC, RoHS Identification only, CR2032 battery Identification only, CR2450 battery Motion sensor 10 mg sensitivity, CR2032 battery, expanded memory Key applications Asset security Asset tracking Tracking of trolleys, pallets, boxes, computers Inventory check General identification of objects

2. Product Sheet www.sensmaster.net sales@sensmaster.net SensMaster 18M, PJU 5/20c, The Strand 47810 Kota Damansara, Malaysia Phone: +60 3 2106 2590 Fax: +60 3 6142 6076 Rev 105 Part No. TM802-CL0 For variants, see below. Edam Card tag with light indicator The Edam card tag is suitable for people tracking outdoor and indoor. It can be fixed on breast pocket or as necklace. The tag can either beacon a message in intervals or configured to wake-up mode. When radio traffic is undesired, e.g. during air travel, the wake-up mode ensures that the tag will not send anything unless commanded to do so by an authorised reader. The messages contain the unique identifier (UID), user defined information stored in the tag, electronic product code (EPC) and various tag status information. The message can be picked up by TM700 readers connected to a computer or a network. Groups of readers are installed to cover a certain read zone. Edam has a light indicator which can be configured to indicate alert state or for pick-to-light. It is intended to be used together with TM700 series RFIDS™ readers. Key features  Holder for necklace or breast-pocket  Light indicator  Configurable radio modes  Replaceable battery  Secure wireless configuration  Option: buzzer, button Communication range to reader Configuration range Operation frequencies Dimensions / Weight Operating temperature Output power Battery Encapsulation User memory (read/write/protect) Update interval Compliance Variants: TM802-CL0 TM802-CLZ TM802-CLZB Up to 80 metres (250 feet) 10 metres (30 feet) 2.4-2.5 GHz ISM, GFSK, Frequency Hopping 85 × 40 × 7 mm / 25 g -20°C to +70°C (-4°F to 160°F) Max 1 mW, 0 dBm EIRP Replaceable Lithium cell IP54 18 bytes UDS, 128 bits EPC Configurable from 1 – 1000 seconds with 1 second at alert CE, FCC, RoHS Light indicator, CR2032 battery Light indicator, Buzzer, CR2032 battery Light indicator, Buzzer, Confirmation button, CR2032 battery Key applications Presence authorisation Personnel tracking Children’s theme parks, schools Personnel safety and alerts Automated guest services

3. Product Sheet www.sensmaster.net sales@sensmaster.net SensMaster 18M, PJU 5/20c, The Strand 47810 Kota Damansara, Malaysia Phone: +60 3 2106 2590 Fax: +60 3 6142 6076 Rev 105 Part No. TM803-CL0 For variants, see below. Edam Sense Card tag with accelerometer and indicators The Edam Sense card tag is identical to the standard Edam tag apart from the addition of a built-in 3- axes accelerometer and additional indicator features. The tag is suitable for people tracking outdoor and indoor. It can be fixed on breast pocket or as necklace. The tag can either beacon a message in intervals or configured to wake-up mode. Using the accelerometer, the tag can be programmed to send messages only when in motion, or to send alerts when not moving. Messages contain the unique identifier (UID), user defined information stored in the tag, electronic product code (EPC) and various tag status information. The message can be picked up by TM700 readers connected to a computer or a network. Groups of readers are installed to cover a certain read zone. Edam Sense has light indicator and a buzzer which can be configured to indicate alert state or for pick- to-light/sound. It is intended to be used together with TM700 series RFIDS™ readers. Key features  Holder for necklace or breast-pocket  Light indicator  Optional buzzer and confirmation button  Configurable radio modes  Replaceable battery  Secure wireless configuration Communication range to reader Configuration range Operation frequencies Dimensions / Weight / Ingress Operating temperature Output power Battery User memory (read/write/protect) Update interval Compliance Variants: TM803-CL0 TM803-CLZ Up to 60 metres (200 feet) 10 metres (30 feet) 2.4-2.5 GHz ISM, GFSK, Frequency Hopping 85 × 40 × 7 mm / 30 g / IP54 -20°C to +70°C (-4°F to 160°F) Max 1 mW, 0 dBm EIRP Replaceable Lithium cell 18 bytes UDS, 128 bits EPC Configurable for at-rest, in-motion, tap and shock CE, FCC, RoHS Light indicator Light indicator and audio indicator Key applications Presence authorisation Personnel tracking Children’s theme parks, schools Personnel safety and alerts Automated guest services Motion resolution 10 mg (at low power mode) Local triggers Light/buzz at motion or shock TM803-CLZB Light indicator, audio indicator and confirmation button

4. Product Sheet www.sensmaster.net sales@sensmaster.net SensMaster 18M, PJU 5/20c, The Strand 47810 Kota Damansara, Malaysia Phone: +60 3 2106 2590 Fax: +60 3 6142 6076 Rev 105 Part No. TM801-10x For variants, see below. Lean tag Buckle tag Single use card form-factor tags The Lean and Buckle card tags are suitable for people tracking outdoor and indoor. The Lean tag has ISO card length and width and can be used as necklace or pocket card. The Buckle tag is ideally shaped for to be used as a breast-pocket name tag. Both tags are sealed to IP67 grade protection. Both Lean and Buckle have punch-out holes for rivets or screws. The Lean tag also has punch-out slit for a neck band. The tags can either beacon a message in intervals or be configured to wake-up mode. When radio traffic is undesired, e.g. during air travel, wake-up mode ensures the tag will not send anything unless commanded to do so by an authorised reader. The Lean and Buckle tags are intended to be used together with TM700 series RFIDS™ readers. Key features  Long battery life  40-bit UID  128-bit EPC memory  Single use  Secure wireless configuration  IP67 grade protection Communication range to reader Configuration range Operation frequencies Dimensions / Weight Operating temperature Output power Battery life time Encapsulation EPC memory (read/write/protect) Update interval Compliance Part numbers: TM801-100 TM801-101 Up to 60 metres (180 feet) 10 metres (30 feet) 2.4-2.5 GHz ISM, GFSK, Frequency Hopping Lean: 85.60 × 53.98 × 4.20 mm / 30 g -20°C to +70°C (-4°F to 160°F) Max 1 mW, 0 dBm EIRP Lean – 6 years at recommended configuration Buckle – 4 years at recommended configuration IP67 128 bit memory and 32-bit password Configurable from reader CE, FCC, RoHS Lean – ISO 7816-1 length and width form factor Buckle – name tag or asset tag form factor Key applications Presence authorisation Personnel tracking Children’s theme parks, schools Personnel safety Preliminary Buckle: 85.60 × 25.00 × 5.30 mm / 20 g Buckle Lean

5. Product Sheet www.sensmaster.net sales@sensmaster.net SensMaster 18M, PJU 5/20c, The Strand 47810 Kota Damansara, Malaysia Phone: +60 3 2106 2590 Fax: +60 3 6142 6076 Rev 105 Part No. TM803-AS0 Helena Rugged wristband tag with security & safety sensors The Helena is a wristband tag for secure, safe and tamper resistant tracking and securing prisoners and detainees. It has an ergonomic design suitable for wrist or ankle yet rugged and shower-proof. The built- in motion sensor can give information about movement as well as violence and fall detection. Helena’s ultra low power radio will transmit its unique ID in regular intervals. This allows the estimation of an approximate position of the tag and its carrier as well as providing a record of movements. If the tag has been locked to a person, it cannot be removed without triggering alert message. Likewise, an attempt to destroy the tag or move the tag outside the range of the RFID readers can be detected. The 3- axes motion sensor makes it possible to detect abuse, violence and falls. The Helena is intended to be used together with TM700 series RFIDS™ readers forming a wireless fence. Key features  Built-in anti-removal sensor  Built-in 3-axes motion sensor  Rugged and shower proof  Ergonomic design  Secure wireless configuration Communication range to reader Configuration range Operation frequencies Dimensions / Weight / Encapsulation Operating temperature Output power Battery life User memory (read/write/protect) Switch sensor Motion resolution Alert triggers Variants: Up to 60 metres (200 feet) 10 metres (30 feet) 2.4-2.5 GHz ISM, GFSK, Frequency Hopping 40 × 60 × 15 mm / 50 g / IP65 -40°C to +85°C (-40°F to 185°F) Max 1 mW, 0 dBm EIRP 2 years at recommended duty profile 288 bits UDS, 128 bits EPC Binary sensor for detection of removal and cutting of rubber band 10 mg (at low power mode) Removal, damage, fall/violence/shock detection Key applications Securing of prisoners and detainees Anti-elopement (health and mental care) Rough environments, e.g. marine, offshore Human safety & violence detection Compliance CE, FCC, RoHS High security version with potted circuit compartment, single use TM803-AS0 TM803-AS1 Medium security version with replaceable battery, multiple use

6. Product Sheet www.sensmaster.net sales@sensmaster.net SensMaster 18M, PJU 5/20c, The Strand 47810 Kota Damansara, Malaysia Phone: +60 3 2106 2590 Fax: +60 3 6142 6076 Rev 105 Part No. TM802-BL0 For variants, see below. Pharos Pick-to-light tag The Pharos pick-to-light tag utilises light, and optionally sound, to find an object fast. In a typical case, items would be tagged with Pharos tags. A picker would select an item from an electronic pick-list on a handheld. Rough co-ordinates would be provided; and the application would send a command to the Pharos tag to indicate its location. Using light and sound as guidance for locating and picking assets is a proven method of improving productivity, including reduced time-to-pick and reduced errors. Pharos is suitable for implementing pick-to-light applications when the inventory is stored in zones or ad-hoc. With the optional motion sensor, the Pharos can also serve as a movement monitoring device. The motion sensor can check if an asset is moved when not expected or authorised, upon which it can send alert message to the reader(s) and/or start buzzing. Pharos is intended to be used together with TM700 series RFIDS™ readers. Key features  Programmable light indicator  Long battery life  Configurable radio modes  Secure wireless configuration  Options: buzzer, button, motion sensor Communication range to reader Configuration range Operation frequencies Dimensions / Weight Operating temperature Output power Battery Encapsulation User memory (read/write/protect) Update interval Compliance Variants: TM802-BL0 TM802-BLB TM803-BLZB Up to 80 metres (250 feet) 10 metres (30 feet) 2.4-2.5 GHz ISM, GFSK, Frequency Hopping 80 × 40 × 20 mm (excl flanges) / 90 g -20°C to +70°C (-4°F to 160°F) Max 1 mW, 0 dBm EIRP Replaceable 2 × AAA IP54 36 bytes UDS, 128 bits EPC Configurable from 1 – 1000 seconds with 1 second at alert CE, FCC, RoHS Light indicator Light indicator, Confirmation button Light indicator, Buzzer, Confirmation button, Motion sensor Key applications Asset tracking Itemised pick-to-light/pick-to-sound Asset security Identification of objects

7. Product Sheet www.sensmaster.net sales@sensmaster.net SensMaster 18M, PJU 5/20c, The Strand 47810 Kota Damansara, Malaysia Phone: +60 3 2106 2590 Fax: +60 3 6142 6076 Rev 105 Part No. TM803-BS0 For variants, see below. Boyard Asset security tag The Boyard asset security tag which can provide unbreakable asset security if installed according to SensMaster’s recommendations. Boyard’s advanced security features ensure that the tag can neither be removed from the asset nor be destroyed without detection. It is fitted with anti-removal sensor and a motion sensor which can detect removal of tag from asset and any movement of the asset. The tag can be pre-programmed to send alert message at attempted security breach. In alert state, Boyard will keep beaconing alert message every second regardless of radio configuration. Furthermore, the tag’s wireless security ensures that the tag cannot be reconfigured without authorisation. The tag has a rugged IP54 grade enclosure with durable flanges. It is recommended to be screwed onto the asset with recommended double sided tape. Boyard is intended to be used together with TM700 series RFIDS™ readers. Key features  Switch sensor  3-axes motion sensor  Long battery life  Configurable radio modes  Secure wireless configuration  Option: buzzer Communication range to reader Configuration range Operation frequencies Dimensions / Weight Operating temperature Output power Battery Encapsulation User memory (read/write/protect) Update interval Compliance Variants: TM803-BS0 TM803-BSZ TM802-BS0 Up to 60 metres (200 feet) 10 metres (30 feet) 2.4-2.5 GHz ISM, GFSK, Frequency Hopping 80 × 40 × 20 mm (excl flanges) / 90 g -20°C to +70°C (-4°F to 160°F) Max 1 mW, 0 dBm EIRP Replaceable 2 × AAA IP54 36 bytes UDS, 128 bits EPC Configurable from 1 – 1000 seconds with 1 second at alert CE, FCC, RoHS Anti-removal sensor, motion sensor Anti-removal sensor, motion sensor, buzzer Anti-removal sensor only Key applications Asset security, e.g. data centres, artefacts Detection/prevention of vandalisation Weapons, ordnance, explosives Vehicles, containers

8. Product Sheet www.sensmaster.net sales@sensmaster.net SensMaster 18M, PJU 5/20c, The Strand 47810 Kota Damansara, Malaysia Phone: +60 3 2106 2590 Fax: +60 3 6142 6076 Rev 105 Part No. TM803-W00 For variants, see below. Anholt Rugged asset security & safety tag The Anholt is designed for heavy duty asset security and safety. With its rugged enclosure, Anholt is suitable for outdoor equipment including machinery, tool-boxes, gangboxes, yachts, boats, vehicles, carts, pallets and containers, which are spread over a larger areas such as fabrication yards, harbours, terminals, sea vessels, manufacturing floors, off-shore rigs, plantations, industrial compounds or construction sites. The built-in motion sensor can give information about usage and movement of the asset. Anholt beacons radio messages in settable intervals. It can be configured to store sensor readings into logging memory with time stamps. In addition, the tag can be configured to message alerts when sensor threshold values are exceeded. The message can contain the unique identifier (UID), the alert flag, user defined information stored in the tag, EPC number or sensor information. The Anholt is intended to be used together with the TM700 series RFIDS™ readers. Key features  3-axes motion sensor  Very long battery life  Rugged IP65 enclosure  Secure wireless configuration  Option: tilt sensor, buzzer Communication range to reader Configuration range Operation frequencies Dimensions / Weight Operating temperature Output power Battery Encapsulation User memory (read/write/protect) Update interval Compliance Variants: TM803-W00 TM803-WT0 TM803-WTZ Up to 80 metres (250 feet) 10 metres (30 feet) 2.4-2.5 GHz ISM, GFSK, Frequency Hopping 65 × 65 × 40 mm / 150 g -40°C to +85°C (-40°F to 185°F) Max 1 mW, 0 dBm EIRP Heavy duty long life battery IP67 or IP65 36 bytes UDS, 128 bits EPC Configurable from 1 – 1000 seconds with 1 second at alert CE, FCC, RoHS Motion sensor, Temperature sensor, IP67 Motion sensor, Tilt sensor, Temperature sensor, IP67 Motion sensor, Tilt sensor, Temperature sensor, Buzzer, IP65 Key applications Asset security, asset safety Mishandling/abuse detection Weapons, ordnance, explosives Transportation safety, vehicles, containers Construction sites

9. Product Sheet www.sensmaster.net sales@sensmaster.net SensMaster 18M, PJU 5/20c, The Strand 47810 Kota Damansara, Malaysia Phone: +60 3 2106 2590 Fax: +60 3 6142 6076 Rev 105 Part No. TM802-B201 For variants, see below. Humidity & temperature logging tag The Isön temperature and humidity logging tag has a small form factor with a flanged enclosure which can easily be fixed onto or within various types of structures. The tag can store up to 10,000 temperature and humidity log-points in its memory together with their time-stamps. Sensor data can be stored as log- points in time intervals or according to threshold conditions. The tag uses the 2.4 GHz ISM band and can communicate with TM700 series RFIDS™ readers at up to 80 metres range with only 1 mW (0 dBi) output power. The Isön kit, TMK-701-007, includes an evaluation application for initialising and uploading logs from Isön tags and exporting its humidity, temperature and time values to a spread-sheet tool, e.g. Microsoft Excel, for analysis and graphing. Key features  Simultaneous measurement of humidity and temperature  Up to 10,000 log points with time signature  Configurable log-intervals, threshold alerts, comfort zone and dew-point alerts  Long battery life Communication range to reader Configuration range Operation frequencies Dimensions / Weight Operating temperature Output power Sensor range Accuracy User memory (read/write/protect) Update interval Compliance TM802-B201 TM802-W202 Up to 80 metres (250 feet) 10 metres (30 feet) 2.4-2.5 GHz ISM, GFSK, Frequency Hopping 80 × 40 × 20 mm (excl flanges) / 90 g -18°C to +80°C (0°F to 176°F) Max 1 mW, 0 dBm EIRP 0% - 100% RH, -30°C - +85°C ±2% RH @ 20%-80% RH, ±0.4°C @ 25°C 36 bytes UDS, 128 bits EPC Configurable from 1 – 1000 seconds with 1 second at alert CE, FCC, RoHS IP54 1, replaceable 2 × AAA batteries IP65 1, long life battery Key applications Domestic health, sports facilities, offices Energy saving, HVAC Pharmaceutical storage Food storage and distribution, e.g. cold-chain Variants: Isön 01 Isön 02 Resolution 0.7% RH, 0.01°C Preventive maintenance, dew/moisture alert (1) When immersed in or splashed with water, the humidity value will not be correct until the Ison is dry.

10. Product Sheet www.sensmaster.net sales@sensmaster.net SensMaster 18M, PJU 5/20c, The Strand 47810 Kota Damansara, Malaysia Phone: +60 3 2106 2590 Fax: +60 3 6142 6076 Rev 105 Part No. TM702 For variants, see below. Celebes S Reader for stationary installations indoor The Celebes S reader is used together with the TM800 series RFIDS™ tags and sensors. Applications include asset tracking, personnel safety, vehicle tracking, asset security, as well as automatic data collection from multiple remote sensors. The reader can acquire information from more than 200 tags per second as well as giving commands to selected tags. The Celebes S has two configurable channels, programmable RF modes and multiple antenna options. The it is available with different types of physical interfaces, including Ethernet LAN, USB, Long Range Bluetooth®, WiFi, and RS232. The Ethernet LAN interface makes it possible to connect several Celebes readers in a TCP/IP network to cover a larger area, multiple gates, or a perimeter. Accessories to the Celebes S reader include power adaptor and a variety of antennas. It can be powered via Power over Ethernet (PoE) which reduces installation and maintenance cost. Key features  Handles large number of tags simultaneously  Configurable radio modes  Variety of antenna options  Secure wireless configuration  Flexible interface options Communication range to tag Configuration range to tag Operation frequencies Dimensions / Weight / Protection Operating temperature Output power Power Anti-collision Antenna ports Current consumption Compliance Variants: TM702-S20 TM702-SLP TM702-SB0 Up to 80 metres (250 feet) with 2.5 dBi antennas 10 metres (30 feet) 2.4-2.5 GHz ISM, GFSK, Frequency Hopping 150 × 45 × 100 mm / 200 g / IP54, NEMA3 -20°C to +70°C (-4°F to 160°F) Max 1 mW, 0 dBm EIRP PoE, 12-30 VDC, 110-240 VAC via adapter Up to 200 tags per second 2 × SMA 450 mA CE, FCC, RoHS RS232 interface, 12-30 VDC Ethernet LAN interface with PoE (IEEE 802.3af/at) Bluetooth interface, 12-30 VDC Key applications Reading and configuring all TM800 series tags and sensors Environmental monitoring Asset management Indoor installation. For outdoor installation use the Celebes W instead

11. Product Sheet www.sensmaster.net sales@sensmaster.net SensMaster 18M, PJU 5/20c, The Strand 47810 Kota Damansara, Malaysia Phone: +60 3 2106 2590 Fax: +60 3 6142 6076 Rev 105 Part No. TM702-WLP For variants, see below. Celebes W Reader for stationary installations with IP65 grade enclosure The Celebes W reader (‘W’ for weatherproof) is used together with the TM800 series RFIDS™ tags and sensors. Applications include asset tracking, personnel safety, vehicle tracking, asset security, as well as automatic data collection from multiple remote sensors. The reader can acquire information from more than 200 tags per second as well as giving commands to selected tags. The Celebes has two configurable channels, programmable RF modes and multiple antenna options. It is available with different types of data communication interfaces, including Ethernet LAN, Class 1 Bluetooth and RS485. The Ethernet LAN interface makes it possible to connect several Celebes readers in a TCP/IP network to cover a larger area, multiple gates, or a perimeter. Accessories to the Celebes reader include power adaptor and a variety of antennas. The LAN versions can be powered via Power over Ethernet (PoE) which reduces installation and maintenance cost. Key features  Handles large number of tags simultaneously  Configurable radio modes  Variety of antenna options  Secure wireless configuration  Flexible interface options Communication range to tag Configuration range to tag Operation frequencies Dimensions / Weight / Protection Operating temperature Output power Power / Consumption Anti-collision Antenna ports User interface Compliance Variants: TM702-WLP TM702-W80 TM702-WB0 Up to 60 metres (200 feet) with 2.5 dBi antennas 10 metres (30 feet) 2.4-2.5 GHz ISM, GFSK, Frequency Hopping 226 × 143 × 50 mm / 600 g / IP65 -20°C to +70°C (-4°F to 160°F) Max 1 mW, 0 dBm EIRP PoE, 12-30 VDC / max 450 mA Up to 200 tags per second 2 × SMA Multicolour programmable LED, LEDs for ON, event & network CE, FCC, RoHS Ethernet LAN interface with PoE (IEEE 802.3af/at) RS485 interface, 12-30 VDC, 5 metre power & data cable included Bluetooth Class 1 interface, 12-30 VDC, 5 metre power cable included Key applications Reading and configuring all TM800 series tags and sensors Environmental monitoring Asset management

12. Product Sheet www.sensmaster.net sales@sensmaster.net SensMaster 18M, PJU 5/20c, The Strand 47810 Kota Damansara, Malaysia Phone: +60 3 2106 2590 Fax: +60 3 6142 6076 Rev 105 Part No. TM7G2 For variants, see below. Celebes G2 Readers for stationary installations The Celebes G2 readers are used together with the TM8G2 series RFIDS™ tags. Applications include asset tracking, personnel safety, vehicle tracking, and asset security. The reader can acquire information from more than 200 tags per second as well as giving commands to selected tags. The Celebes G2 has two configurable channels, programmable RF modes and multiple antenna options. The it is available with different types of physical interfaces, including Ethernet LAN, Long Range Bluetooth®, and RS232. The Ethernet LAN interface makes it possible to connect several Celebes readers in a TCP/IP network to cover a larger area, multiple gates, or a perimeter. Accessories to the Celebes G2 reader include power adaptor and a variety of antennas. It can be powered via Power over Ethernet (PoE) which reduces installation and maintenance cost. Key features  Handles large number of tags simultaneously  Configurable radio modes  Variety of antenna options  Flexible interface options  Choice between IP54 and IP65 enclosures  Backwards compatible with F2M08, FS800 series and other RFIDS™ G2 tags Communication range to tag Configuration range to tag Operation frequencies Dimensions / Weight Operating temperature Output power Power Anti-collision Antenna ports Current consumption Compliance Variants: TM7G2-SLP TM7G2-WLP TM7G2-SL0 Up to 60 metres (180 feet) with 2.5 dBi antennas 10 metres (30 feet) 2.4-2.5 GHz ISM, GFSK, Frequency Hopping 150 × 45 × 100 mm / 200 g (SLP) or 226 × 143 × 50 mm / 600 g (WLP) -20°C to +70°C (-4°F to 160°F) Max 1 mW, 0 dBm EIRP PoE, 12-30 VDC, 110-240 VAC via adapter Up to 200 tags per second 2 × SMA 450 mA CE, FCC, RoHS Ethernet LAN interface with PoE (IEEE 802.3af/at), IP54 enclosure Ethernet LAN interface with PoE (IEEE 802.3af/at), IP65 enclosure Ethernet LAN interface, 12-30 VDC, IP54 enclosure Key applications Reading and configuring TM8G2 series tags Asset tracking Asset management Indoor installation. IP 65 IP 54

13. Product Sheet www.sensmaster.net sales@sensmaster.net SensMaster 18M, PJU 5/20c, The Strand 47810 Kota Damansara, Malaysia Phone: +60 3 2106 2590 Fax: +60 3 6142 6076 Rev 105 Part No. TMP-HRT307 For variants and accessories, see below. Reunion Handheld active RFIDS™ reader with Barcode scanner Reunion is a full VGA resolution handheld with touch-screen, alphanumeric keyboard, WLAN, Bluetooth, built-in TM701 RFIDS™ reader, and Barcode scanner. The Reunion is intended for fast pinpointing of assets, data collection and configuration of active RFIDS™ tags. It can be used together with the TM800 series RFIDS™ tags and sensors, which often have their unique identifier (UID) available from tag’s barcode label. Applications include asset tracking, asset inventory and sensor data collection and configuration. With its VGA resolution colour touch screen, the Reunion is easy and practical to operate. The reader can communicate with central system application via WiFi. TagMaster’s TM901-AB0A Gemia can be attached to the Reunion for 3-in-1 requirements (Passive RFID, Active RFID, Barcode scanner) Key features  Multiple technology capability —Active RFID (RFIDS™) —Barcode (1D) —Passive RFID via optional TM901-AB0A Gemia  Easily accessed common commands  Windows CE v6 with VGA touch screen  Optional camera Communication range to active tag Operation frequencies Dimensions / Weight / Protection Operating temperature Output power Power Anti-collision Barcode sensor / scan / range Barcode light Compliance Variants and accessories: TMP-HRT307 TMP-HRT308 Up to 3 metres (10 feet) omnidirectional 2.4-2.5 GHz ISM, GFSK, Frequency Hopping 220 × 110 × 65 mm / 900 g / IP54 -20°C to +70°C (-4°F to 160°F) Max 1 mW, 0 dBm EIRP Lithium Polymer Batteries Up to 100 tags per second 1D, 2500 pixels / up to 100 scans per second / <20 cm (8.2 inch) Max 4500 Lux, 625 nm, 11.8” (300mm) for 20 mil (0.50mm) barcode CE, FCC, RoHS Standard version without camera Standard version with camera Key applications Asset management Data collection Sensor tag configuration Inventory check TM901-AB0A TMA-0901-006 Attachable ISO 18000-6c passive RFID reader Holder for TM901-AB0A

14. Product Sheet www.sensmaster.net sales@sensmaster.net SensMaster 18M, PJU 5/20c, The Strand 47810 Kota Damansara, Malaysia Phone: +60 3 2106 2590 Fax: +60 3 6142 6076 Rev 105 Part No. TM705-WLPA For variants, see below. Ambon Reader with built-in directional antennas The Ambon is a rugged dual channel RFIDS™ reader intended for demanding applications and fixed outdoor installations. Together with the TM800 series ID tags and sensor tags, it can be used for asset security and tracking people, vehicles and assets, as well as to read out sensor data from multiple remote sensors. The Ambon is fitted with built-in circular polarised and directional antennas. It is available with different types of physical interfaces, including LAN, RS485 and cellular. The Ethernet LAN interface makes it possible to connect several readers in a network to cover a larger area, multiple gates, or a perimeter. Accessories to the Ambon reader include power adaptor and a variety of antennas. The LAN versions can be powered via Power over Ethernet (PoE) which reduces installation and maintenance cost. Key features  Handles large number of tags simultaneously  Configurable radio modes  Built-in circular polarised antennas  Secure wireless configuration  Flexible interface options Communication range to tag Configuration range to tag Operation frequencies Dimensions / Weight / Protection Operating temperature Output power Power / Consumption Anti-collision Compliance Variants: TM705-WLPA TM705-W80A TM705-WG0A Up to 100 metres (300 feet) Up to 50 metres (150 feet) 2.4-2.5 GHz ISM, GFSK, Frequency Hopping 226 × 143 × 50 mm / 600 g / IP65 -20°C to +70°C (-4°F to 160°F) Max 2.5 mW (4 dBm) EIRP PoE, 12-30 VDC / max 300 mA Up to 200 tags per second CE, FCC, RoHS Ethernet LAN interface with PoE (IEEE 802.3af/at) GSM/GPRS/CDMA, 12-30 VDC, 5 metre power & data cable included Key applications Asset tracking Personnel tracking Vehicle tracking Asset security RS485 interface, 12-30 VDC, 5 metre power & data cable included User interface Multicolour programmable LED, LEDs for ON, event & network Lobe / Polarisation 60° -3dB lobe / Circular Preliminary

15. Product Sheet www.sensmaster.net sales@sensmaster.net SensMaster 18M, PJU 5/20c, The Strand 47810 Kota Damansara, Malaysia Phone: +60 3 2106 2590 Fax: +60 3 6142 6076 Rev 105 Part No. TM803-W40 Orust Activity detector with PIR, vibration, audio and light sensors The Orust activity detector detects activity or movement in a defined area. It is intended for fixed installations. Orust acts as a sensor ‘tag’ in the RFIDS™ system. The sensors included are a PIR motion sensor to detect people or vehicles moving, a vibration sensor, an audio detector to detect voices or other noise and a light sensor to detect any unexpected light in a dark room. The use and threshold values of each sensor can be configured. When used together with TM700 series RFIDS™ readers, the Orust reports any activity in its sensitive sector by raising the device status flag just as other RFIDS™ sensor tags. With this information the application logic can determine needed actuations such as triggering alerts, cameras, HVAC etc. A typical scenario is in a secure room to which only authorised personnel have access. Activity detectors are installed to watch over entrances and critical zones. Authorised personnel are fitted with personnel tags, e.g. of the Edam, Lean or Buckle types. If the system receives activity detected status from an Orust, but does not sense a corresponding presence of a personnel tag, the application can decide that there is a security breach and trigger alarm. Key features  Wireless communication, easy to install  Rechargeable battery with mini-USB connector  Up to 30 metres recommended range to reader  Secure wireless configuration  Includes light sensor  Built in loud buzzer and bright red lamp for alarm Communication range to reader Configuration range Operation frequencies Dimensions Weight Output power Power supply Detection range PIR Power consumption Operating temperature Encapsulation Mounting Compliance Up to 60 metres (200 feet) 10 metres (30 feet) 2.4-2.5 GHz ISM 110 × 70 × 55 mm 250 g Max 1 mW, 0 dBm EIRP USB, rechargeable Lithium battery, 2 years battery life 15 metres (50 feet), 90° angle Max 20 mA (Static < 50 µA) -30°C to +70°C (14°F to 122°F) IP65 Wall-mounting CE, FCC, RoHS Key applications Intrusion detection Access security HVAC Lighting control General movement sensor Vibration sensitivity 10 mg Local triggers Light/buzz at alert situations Preliminary