4. We use at our unit polymeric membranes to separate hydrocarbons without heating feedstock to the boiling point, and without using fired heaters.

5. Because of the favourable feedstock, our refinery provides cost-effective high quality products which meet international quality standards. This and the fact that 100% of the feed is converted into products results in a considerably shorter pay- back period than comparable crude oil refinery projects of similar product output

6. - The advantages of our units are portability (all blocks of units do not exceed the standard transportation dimensions), full factory readiness for operation, high degree of automatization, the use of new advanced catalysts.

8. UPM 12K processes all types of waste oils, fuel oil and oil sludge. Processed products are : gas 15-20%, gasoline 15-20%, diesel fuel 35-40%, 20-25% bitumen residue (by fuel oil M-100). Novelty of our technology is to enable the use of zeolite catalyst to produce desulphurization and have a system for removal of coke from the heat zone of raw materials (without stopping the equipment).

9. Performance up to 1ton/hour of fuel oil. Annual capacity 8500tons/year. Capacity up to 1.5 tones/hour. Annual capacity 12,750 tons/year. Manufacturing period 3 month. The installation supplied in full operational readiness with a set of internal piping. Commissioning works are included in the territory of the Russian Federation.

10. Capacity 1.5 tons per hour of fuel oil

11. UPM 12K in assembly

12. Control panel of installation UPM 12K Push buttons to start and stop the installation of different engines UPM 12K ТРМ – meter – universal controller is designed to build an automatic control system and industrial process control

13. Block buffer tanks for the ready product Reservoir for petrol Reservoir for kerosene Reservoir for fuel oil Drain pump of ready product in tank farms. Pumps operates on the testimony of the level gauge

14. Feed unit of raw materials Dosing pumps supply of raw materials to the reactor block Dosing pump of cold solar irrigation

15. Unit of residue removal Drain pump of heavy residue to the tank form Capacity for accumulation residue Heating system of the heavy residue to temperature of 200 degrees Celsius

16. Gas preparation unit Filter for cleaning incoming gas flow Vacuum pump to control the gas flow

17. Unit of gas combustion and Unit of heat utilization Expansion tank designed for circulating on the cooling system of furnace afterburning gas Expansion tank which performs role of return valve. (water seal) Furnace of afterburning gas

18. Wet scrubber Capacity designed for coolant or heat conducting which acts as a filter for the flue gasses Filter for cleaning the gas stream from the possible entry micro particles coolant or heat conducting

19. Dimensions and weight of the blocks UPM 12K № Name of the blocks Overall dimensions (L,b,h)(мм) Mass or Weight (kg) 1Thermal pyrolysis unit9000, 2000, 230013500 2Block of distillation columns6700, 2000, 25002320 3Preheating unit1500, 1320, 16001400 4Gas preparation unit2200, 1300, 3000690 (210) 5Feed unit of raw materials2000, 1500, 1700680 6 Block of buffer tanks for the ready product 3000, 1500,2300800 7Unit of residue removal2100, 1000, 1600370 8Wet scrubber3600, 1150, 2700680 9Afterburning gas unit1500, 1500, 3000740 10Heat utilization unit1800, 1200, 2400520 11Control block of equipment830, 800, 2100160, 180 12Fuel oil preparation unit6500, 1000, 17001200

26. For more information Please visit our website: www.arabbridge.net +60178876663