1. S/W R&D Group – Europe

2. 2/11 Select platform to (NOX) USB Check the Version IH2

3. 3/11 Drag & Drop the.sre or.s3 file

4. 4/11 Drag & Drop the.csc file

5. 5/11 Check code binary and CSC Binary (Recommand)

6. 6/11 1. Check the CSC Binary Only 2. Uncheck the File System Format 3. Check code binary and CSC Binary

7. 7/11 Must uncheck this box If checked this box maybe it’ll occur problem. (ex : no boot, delete some data, download fail etc)

8. 8/11 The COM port is used to transfer the flash loader to the phone. you can select the maximum transfer speed OptiFlash will use to communicate with the phone. However, OptiFlash will use a slower speed if either the PC’s or the phone’s serial hardware is incapable of handling the selected speed.

9. 9/11 Check Erase all unused regions When this option is enabled, all regions in memory that are not overwritten by the contents of the SRE file to be loaded, and are not listed as reserved regions, are erased (i.e. filled with 0xff). If Unchecked this box maybe it’ll occur problem. (ex : no boot, delete some data, download fail etc) MUST CHECK

10. 10/11 Click the flash button

11. 11/11