1. 2016 Commercial Project Submittal Webinar 04.25.16 1

2. Click on “Current Provider Login

3. Enter User name and password

4. 1 st Click on Program Summary to view your active programs 2nd Click on the program that you want to create project

5. Normally the Facility Name Date project is ready for post inspection Total cost of project Deemed for Basic M&V for Custom Last step click Create a new project

7. Click here to open project

8. Click here to add site information

9. Enter ESI ID Add Group Type Click here to auto-fill Address Add Project Contact Information Check message after you click on “Save “message will be green if site is added successfully After Customer is added click on the Return to Site List

10. Click here to add e- file

11. Click on drop down to pick measure to be installed

12. Pick measure

13. Click here search your computer for e-file

14. Search documents

15. 1 st Select document Once document is selected click on open button to attach file

16. Click save to upload file into EEPM

17. The kW and kWh will populate once the file is uploaded successfully You will need to click on the Recalculate button to populate the incentive

18. Once the incentive populates click on the Return to this Project button

19. Four Tabs that will house documents and allow documents to be attached and add or read comments Summary tab give basic info about project

20. Click on document name to open PDF required for project documentation.

21. Click on paper clip to add document

23. Click to add comment regarding project. This is the best way to communicate for service providers and program managers regarding project.

24. Submit project Type anti-spam

26. xxxxxxxxx xxxxxx xxxxxxxxxxxxx xxxxxxx

27. Project status you can access different documents from each status