1. AKIMBO [Dual Trigger Rapid Fire] With akimbo activated you will have rapid fire on both the left and right triggers (independently), this is great for akimbo or dual weapons in Call of Duty and other FPS games. To activate akimbo HOLD the “left trigger” and tap the “Mod“ button, repeat to deactivate. While active, the player 3 LED will remain lit. PAGE 1 CONTEN TS PAGE 1: Rapid Fire & Burst Fire, Akimbo (Dual Trigger) PAGE 2: Default Modes, Changing Modes, Mimic PAGE 3: Sub Modes, Jitter Fire, Drop Shot, Drop Shot (tactical layout) PAGE 4: Jump Shot, Quick Scope, Auto Aim, COD Fast Reload PAGE 5: Battlefield Auto Spotting, GOW Perfect Active Reloads PAGE 6: Adjusting and programming modes PAGE 7: Programmable speed settings table PAGE 8: Advanced Feature management RAPID FIRE To activate rapid fire, tap the “Mod” button located on the back of the controller. You will see the player 4 LED start flashing indicating Rapid Fire is now activated. To turn off rapid fire tap the “Mod” button again and the player 4 LED will stop flashing indicating rapid fire is turned off. BURST FIRE To activate burst fire HOLD the “X” button and then tap the “Mod” button. The player 4 LED will turn on solid to indicate that burst fire is activated. The burst fire will fire at the current speed/burst settings which can be adjusted within programming mode. You can tap the “Mod” button to turn burst fire on/off while activated. To deactivate hold “X “and tap the “Mod” button. + + HOLD PAGE 2 MODESPEEDCOMPATIBLE GAMES MODE 1: 8.33spsCOD (MW2, MW3, Black Ops) Rifles MODE 2: 11.35spsCOD (MW2, MW3, Black Ops 1 & 2) Pistols MODE 3: 16.67spsCOD (Black Ops 2) Rifles, GTA 4, Left 4 Dead MODE 4: 20spsHalo series MODE 5: 8.33spsCOD - Word at War Only - Riffles MODE 6: 10spsCOD - Word at War Only - Pistols MODE 7: 6.85spsGears of War - Hammerburst MODE 8: 8spsGears of War - Pistols MODE 9: 20spsOpen Mode – Default 20 SPS MODE 10: 25spsOpen Mode – Default 25 SPS MODE AND DEFAULT SPEED CHART CHANGING MODES There are 10 modes to select from. Each is pre-programed with a specific speed, but can be independently programmed to an new speed (See page 6). To change to the next mode you must HOLD the “Mod” button on the back of the controller for 3 seconds. You will see the player 3 & 4 LEDs flash together, count the number of flashes of the LEDs. This will indicate which mode you are currently in. (2 flashes = Mode 2) (3 flashes = Mode 3). You can also scroll back to the previous mode by holding the right trigger along with the mod button.

2. DROP SHOT (standard Layout) DROP SHOT (Tactical Layout) Drop shot allows you to automatically drop to prone as soon as you start firing and stand up when you stop. The GM MASTER supports both standard button layouts and tactical button layouts. To activate drop shot for standard button layouts HOLD “B” and tap the “Mod” button. To activate drop shot for tactical button layouts HOLD in the “right thumbstick click” and tap the “Mod” button. PAGE 3 JITTER FIRE [All COD Except MW3] Jitter takes advantage of a glitch in most COD games allowing for faster firing of just about all weapons including shotguns and 3-Round burst weapons. To activate the jitter mod HOLD the “Y” button and tap the “Mod” button. Jitter has 2 sub modes. + + + PAGE 4 AUTO AIM The auto aim feature ONLY WORKS WITH ZOMBIES & CAMPAIGN GAMES AND DOES NOT WORK WITH ONLINE MATCHING GAMES. The auto aim is a feature for left trigger, auto aim will work with both rapid fire on and off. To activate auto aim HOLD “Back” and tap the “A” button. + HOLD

3. Each rapid fire mode can be programmed to one of 50 different speed between 4 and 50 shots per second. You can also set the burst fire for each mode from 2 – 10 shots per burst. Enter/Exit the Programming Mode: To enter or exit the programming mode you must first press and hold the mod button and within 2 seconds press and hold both the left and right triggers. Continue to hold all three for 5 seconds. You will see the player 4 LED flash on for 2 seconds them go out. You have now entered or exited the programming mode and can release both triggers and the mod button. Change Rapid Fire speed: To change the rapid fire speed you only need to press and release the left or right trigger. The right trigger to make the speed faster and the left trigger to make it slower. The player 4 LED will flash every time you press the right rigger and the player 3 LED will flash every time you press the left trigger to indicate you have made a change. Once you have reached the MIN or MAX speed the LED will no longer flash. Change Burst Fire Quantity: To change the number of shots fired with the burst fire you must HOLD down the X button and while holding follow the same procedure as changing the rapid fire by pressing the left or right triggers. Check Rapid Fire speed Setting: To check the currently set rapid fire speed you only need to tap the mod button. The player 3 Led will flash the “tens” and position and the player 4 will then flash the single digit. (example. Player 3 flashes 3 times, followed by the player 4 flashing 6 times, you are now at speed setting 36) Refer to the table on the next page for all of the speed settings. Check Burst Fire Setting: To check the currently set burst fire setting you must HOLD the X button and while holding X tap the mod button. The player 4 Led will flash 2-10 times to indicate the number of shots set for the burst fire. Reset Current Mode to Default settings: To reset the rapid fire mode you are currently editing to the factory default you must hold both the left and right triggers together for 7 seconds. After 7 seconds the player 3 and 4 LED’s will both flash very fast for 2 seconds and the Programming mode will automatically be exited with the default settings saved. MASTER RESET: Resets ALL modes, speeds and sub modes to their default settings. Hold X + Y + B + A for 7 seconds. You will see the player 3 LED flash then the player 4 LED, then both. All settings will be set to default and the programming mode will be exited. PAGE 5 PAGE 6 Programming the Adjustable Rapid/Burst Fire Settings + HOLD + (5 sec) TAP or + or + HOLD + (7 sec) + + +

4. All features with the exception of rapid fire and burst fire have an advanced management option that allows you to disable them. This is especially useful if you find there are features you do not use and do not want the possibility to accidentally activate the feature. ENTER (AFM) To enter the Advanced Feature management you must have the controller ON and the rapid fire must be turned OFF. Hold the (right trigger + left trigger + B + Y + X) together all at the same time for 7 seconds. After 7 seconds you will see both player 3 and 4 LEDs flash 10 times very fast. After this you can release all of the buttons. MANAGING FEATURES Now that you are in the AFM you can enable or disable any of the features listed below by just tapping the corresponding button. When you tap one of the buttons you will see the player 4 LED flash either 1 or 2 times. 1 flash = Feature is now ENABLED, 2 flashes = Feature is now DISABLED. Mimic Jitter Fire Drop Shot Auto Aim Jump Shot Quick Scope COD Fast Reload GOW Perfect Reloads Battlefield Auto Spotting EXIT ADVANCED FEATURE MANAGMENT To exit AFM just tap the “Mod” button. You will again see the player 4 LED flash 10 times. If you have questions regarding any feature please contact us at 1-800-280-4032 RAPID FIRE SPEED SETTINGS TABLE Rapid Fire SettingShots Per SecondRapid Fire SettingShots Per Second 1502613.89 245.52713.51 341.72813.16 438.42912.5 535.73012.2 633.33111.91 731.253211.63 829.43311.42 927.83411.11 1026.33510.64 11253610.3 1223.913710 1322.73389.8 1421.74399.62 1520.83409.36 1620419.09 1719.23428.62 1818.52438.33 1917.86448.2 2017.24458 2116.67467 2216.13476.67 2315.63486 2415.15495 2514.71504 PAGE 7 Important Rapid Fire Speed Information! The GM MASTER allows you to set rapid fire speeds up to 50 shots per second, but you must be aware that setting the rapid fire to the maximum will NOT work for most games. All games have limitations on the rates at which weapons can fire. Our default mode settings are already optimized to the fastest possible speeds for the games/weapons listed on page 2. The possibility to change these settings are available for you to experiment with and find settings that best compliment your playing style and to be able to create modes for current and future games which are not part of the default setup. PAGE 8 ADVANCED FEATURE MANAGMENT HOLD + + + + (7 sec)

5. 2013 SELECTIONS PAGE 9 Thank you for purchasing one of our custom XBOX 360 GM MASTER controllers. We appreciate your business, and work hard to provide excellent customer experience. If you have any questions about your new controller, please contact us at support@geniusmods.com, and by phone at 1-800-280-4032 SOCIAL MEDIA Like us on FACEBOOK [facebook.com/GENIUSMODS], and follow us on TWITTER [@GENIUSMODS] for updates on monthly contests and giveaways. TUTORIALS For video tutorials and FAQs, visit our website at www.GENIUSMODS.com PAGE 10 THANK YOU YouTube.com/geniusmods360 Facebook.com/geniusmods @geniusmods @_geniusmods

6. WWW.GENIUSMODS.COM MOD BUTTON FUNCTIONS The following functions are controlled by holding the indicated controller button and then tapping the mod button on the back of the controller. BACK BUTTON FUNCTIONS The following functions are controlled by holding the controllers “Back” button (left of the guide button), then tapping the indicated controller button USER MANUAL 215 RUTGERS ST  F L 2  MAPLEWOOD, NJ 07040 GM MASTER RAPID FIRE | BURST FIRE | AKIMBO | JITTER | QUICK SCOPE | MIMIC | DROP SHOT | JUMP SHOT | GOW PERFECT RELOAD | AUTO AIM | QUICK RELOAD | AUTO SPOTTING | 10 PROGRAMMABLE MODES www.GENIUSMODS.com 1-800-280-4032 support@geniusmods.com