1. From the Main Screen -Select County/Region from the drop down menu choices -Then Select Soil Type from the drop down menu -Select Crop from the drop down menu choices

2. Tillage Graph of Yield Probability Initial field Moisture Conditions (IMC) Graph of Yield Probability After the selections for county, soil, and crop are made Select the Graph you wish to View To return to the Main Screen click on the “Return” button

3. IMC Graph of Yield Probability shown without 25% and 50% Bars On either Graph, use the yellow, red, or blue buttons on top to hide the various bars of Yield Probability To return to the Main Screen at any time click the “Return” button Click the yellow, red, or blue buttons again to make the bars reappear

4. Click this button to View Compare Soils/Crops Screen The selections from the Main Screen do not carry over to the comparison screen. Enter information for Soil_1, Crop_1, and Initial Moisture Condition_1. It can be the same entries as on the Main Screen or it can be other values. Compare Initial Moisture Conditions

5. You can see results of different Initial Moisture Conditions by changing Initial Moisture Condition_2 Compare different Soil Types by Selecting another Soil for Soil_2 You can compare different Crops by changing Crop_2

6. Chart Scales Automatic - best fit for the data on each graph Chart Scales the Same Graphs Compared: Same soil, Same initial moisture condition, Different Crop Graphs Compared: Different soil, Same initial moisture condition, Same Crop

7. If the screen looks like this, Select a different Soil Type on the Compare Soils/Crops Screen. The soil has to be matched to the county

8. Press “Fit” to Display Full View of the main screen if it does not fit on the monitor Program displayed in Full View 50% Bar Graph shown (Show/Hide Buttons used for configuring display). The yellow, red, and blue “Show/Hide” buttons affect both graphs. Printing Compare Soils/Crops To return to the Main Screen, click the “Main Page” button.