2. Downloading the bitstream Connect parallel port to PC

3. Downloading the bitstream Connect power supply to XC40-10XL Board Connect Pin 52 to GND Connect Pin 54 to 3.3 V Connect Pin 2 to 5 V Set Bios to ECP Install the XSTOOLs software utility

4. Downloading the bitstream Type “xssetclk xs40-010xl 100” in DOS

5. Downloading the bitstream Place a shunt on the jumper 12(turn off power supply first) Process downloading Turn off Power supply and remove the shunt from the jumper 12

6. Downloading the bitstream

7. Use the XS Board Test Utility to test this board Choose XS40-010XL+ Set port to LPT1

8. Downloading the bitstream The 7-segment LED displays “0” and passed the test

9. Downloading the bitstream Drag and Drop the bit stream file on the GXSLOAD program

10. Downloading the bitstream Test your design