Presentation is loading. Please wait.

Presentation is loading. Please wait.

Output and Actuator Output: Any signal or information, digital or analog that has been decided in a system by a systematic processing way is known as.

Published byStanley Chambers Modified over 8 years ago

Similar presentations

Presentation on theme: "Output and Actuator Output: Any signal or information, digital or analog that has been decided in a system by a systematic processing way is known as."— Presentation transcript:

1

2 Output and Actuator Output: Any signal or information, digital or analog that has been decided in a system by a systematic processing way is known as Output. There are different types of output. The common outputs used for an embedded system design are, LED, 7-segment Display, LCD, GLCD, Monitor, Speaker, motor etc.

3 LED Light Emiting Diode:

4 LED Light Emiting Diode:

5 LED Light Emiting Diode:

6 Seven Segment Display

7

8

9

10 Liquid Crystal Display(LCD)

11

12

13

14

15

16

17 Motor Motor commonly used in embedded system 1. DC motor 2. Stepper motor

18 Motor DC motor is done by providing PWM signal

19 Motor DC motor is done by providing PWM signal

20

21

22

23

Download ppt "Output and Actuator Output: Any signal or information, digital or analog that has been decided in a system by a systematic processing way is known as."

Similar presentations

Ms. Jader INPUT, OUTPUT and STORAGE. Ms. Jader Are parts of the hardware system that allows the users to GIVE information to our computers.

Ms. Jader INPUT, OUTPUT and STORAGE. Ms. Jader Are parts of the hardware system that allows the users to GIVE information to our computers.
5.4 Decoders A decoder is a multiple-input, multiple-output logic circuit that converts coded inputs into coded outputs, where the input and output codes.

5.4 Decoders A decoder is a multiple-input, multiple-output logic circuit that converts coded inputs into coded outputs, where the input and output codes.
Combinational Circuits CS370 – Spring 2003. BCD to 7 Segment Display Controller Understanding the problem: input is a 4 bit bcd digit output is the control.

Combinational Circuits CS370 – Spring BCD to 7 Segment Display Controller Understanding the problem: input is a 4 bit bcd digit output is the control.
LED Display. LED Typical LED forward bias voltage: 1.5 to 2.0 V Typical currents needed to light LED range from 2 to 15 mA.

LED Display. LED Typical LED forward bias voltage: 1.5 to 2.0 V Typical currents needed to light LED range from 2 to 15 mA.
Input and Output Devices - Outputs. Output devices  Output devices are used to get data out of a system.  They should be able to do this as accurately.

Input and Output Devices - Outputs. Output devices  Output devices are used to get data out of a system.  They should be able to do this as accurately.
Potentiometer Electric circuit Cell or Battery Resistor Switch Bulb Earth/Ground LED.

Potentiometer Electric circuit Cell or Battery Resistor Switch Bulb Earth/Ground LED.
Tony Yi 5/2/2015 CENG4480 TUTORIAL 3. ABOUT ME I am “the other” tutor of CENG4480 You can find me at Rm116 in SHB

Tony Yi 5/2/2015 CENG4480 TUTORIAL 3. ABOUT ME I am “the other” tutor of CENG4480 You can find me at Rm116 in SHB
 The central processing unit (CPU) interprets and executes instructions.  The “brains” of the computer.  The speed of the processor is how fast it.

 The central processing unit (CPU) interprets and executes instructions.  The “brains” of the computer.  The speed of the processor is how fast it.
Electronics Design Laboratory Lecture #11, Fall 2014

Electronics Design Laboratory Lecture #11, Fall 2014
BCD to 7-Segment Display

BCD to 7-Segment Display
Storey: Electrical & Electronic Systems © Pearson Education Limited 2004 OHT 4.1 Actuators  Introduction  Heat Actuators  Light Actuators  Force, Displacement.

Storey: Electrical & Electronic Systems © Pearson Education Limited 2004 OHT 4.1 Actuators  Introduction  Heat Actuators  Light Actuators  Force, Displacement.
Introduction.

Introduction.
ASPPRATECH.

ASPPRATECH.
Lab 12 : Liquid Crystal Displays: Slide #2 Slide #3 7-Segment LCD: XOR gate review 7-Segment LCD: System Operation.

Lab 12 : Liquid Crystal Displays: Slide #2 Slide #3 7-Segment LCD: XOR gate review 7-Segment LCD: System Operation.
Liquid Crystal Display

Liquid Crystal Display
Module 2: Hardware and Terminology

Module 2: Hardware and Terminology
Monitors and Sound Systems section 3A This lesson includes the following sections: · Monitors · PC Projectors · Sound Systems.

Monitors and Sound Systems section 3A This lesson includes the following sections: · Monitors · PC Projectors · Sound Systems.
Examining Display Devices Computer Concepts Unit B.

Examining Display Devices Computer Concepts Unit B.
SEVEN SEGMENT DISPLAY By :- Shubham & Sidhant. WHAT EXACTLY IT IS …?  A seven-segment display (SSD), or seven-segment indicator, is a form of electronic.

SEVEN SEGMENT DISPLAY By :- Shubham & Sidhant. WHAT EXACTLY IT IS …?  A seven-segment display (SSD), or seven-segment indicator, is a form of electronic.
Output Devices. How many output devices can you name? –Screen (VDU) –Printers (dot-matrix, laser, ink-jet) –Plotter –Speakers –Motors.

Output Devices. How many output devices can you name? –Screen (VDU) –Printers (dot-matrix, laser, ink-jet) –Plotter –Speakers –Motors.

Similar presentations

Ads by Google