Download presentation
Presentation is loading. Please wait.
Published byMerry Ward Modified over 8 years ago
1
THEMIS IDPU FSW 6/23/2016 1 UCB THEMIS IDPU FSW V4 Mission Profile Tests Peter Harvey
2
THEMIS IDPU FSW 6/23/2016 2 UCB Agenda Mission Profile Testing 1.Overview 2.Solid State Memory Storage Areas 3.Slow and Fast Survey 4.Particle Burst and Wave Burst 5.Data Rate Determination 6.Compression Calculation
3
THEMIS IDPU FSW 6/23/2016 3 UCB Orbital Events Orbital Events of Interest 1.Launch Perigee Altitude = 445 km ± 6 km Apogee Altitude = 84191 km ± 9567.0 km Inclination= 13.4 degrees ± 0.5 deg PCA MASS = 775.6 kg CBE, 829 NTE 2.Commissioning to Science Orbits (P1) 1.5 x 30.9 RE, 7deg inclination, Orbit Period 96 hrs (P2) 1.2 x 19.8 RE, 7deg inclination, Orbit Period 48 hrs (P3) 1.2 x 12.0 RE, 9 deg inclination, Orbit Period 24 hrs (P4) 1.2 x 12.0 RE, 9 deg inclination, Orbit Period 24 hrs (P5) 1.4 x 10.0 RE, 9 deg inclination, Orbit Period 19.2 hrs 3.Eclipse Entry / Exit 4.Radiation Belt Entry / Exit 5.Plasma Pause 6.Conjunction 7.Bowshock 8.MAG Ranging
4
THEMIS IDPU FSW 6/23/2016 4 UCB Science Objectives Observe Onset and Evolution of Magnetospheric Substorm Instability, and Time History of Auroral Eruption, Current Disruption and Lobe Flux Dissipation at the Substorm Meridian 5 Space Probes and 20 Ground Based Observatories P4 P3 P5 P2 P1 GBO
5
THEMIS IDPU FSW 6/23/2016 5 UCB Region Crossings & Triggers RegionDefinition of RegionActivity at Region Entry / Exit Earth & Lunar ShadowsSolar Disk Obscured by > 1%EFI in eclipse mode (change BEB bias table) Inner & Outer Radiation Belts (RBT) Probe within L=6SST in attenuated mode (close attenuator, turn off autonomous att.) Deep Plasma Sphere (PSH) Probe within L=4EFI in high-density mode (change BEB bias table) Foreshock Solar Wind (FSW) Outside of nominal bow shock distance D minus a tolerance t [t= min(3R E, half-sheath thickness). ESA in foreshock mode (ETC table load, keep standard sweeps) Solar Wind Beam (SWB)P1, in dayside R E only, at X GSE > 20R E ESA in solar wind beam mode (ETC table load, command double sweeps) High Mag Field (HMF)|B_model| (T89, Kp=2) < 500nTFGM in most sensitive range Perigee (PG1)Perigee +/- 1 hourMAG calibration (SCM cal 1 minute, FGM 405 for 2 hours) Average Plasma Sheet (PSP) Hammond model, <5R E thickPotential conjunction. North American Sector (NOA) In/Out ± 6.5 GLT hrs of Central CanadaPotential conjunction. Probe Conjunctions (C4D) Probes Within ± 2 R E of each other & within NAS & within ± 2 R E for inner, ± 5 R E for outer probes 4day conjunction Dawn/Dusk Conjunctions (DDC) Dawn/Dusk conjunctions.
6
THEMIS IDPU FSW 6/23/2016 6 UCB P2 ORBIT EVENTS 30:00: SLOW SURVEY MODE /IDPURAWHEX 1005 ;TRIGGER DISABLE /IDPURAWHEX 1003 ;WBURST DISABLE /IDPURAWHEX 1002 ;PBURST DISABLE /IDPURAWHEX 1001 ;SLOW SURVEY /IDPURAWHEX B80F ;COMPRESS ALL 18:00: FAST SURVEY, BURSTING MODE /IDPURAWHEX 1081 ;FAST SURVEY MODE /IDPURAWHEX 1082 ;PBURST ENABLE /IDPURAWHEX 1083 ;WBURST ENABLE /IDPURAWHEX 1085 ;TRIGGER ENABLE 34:00: 100% COMPRESSED Orbit Perigee/Apogee : 1.2 x 19.8 Re Orbit Period : 48 hours Fast Survey : 12 hours Compression: 4 hours 42:00: PASS START /IDPURAWHEX 1084 ;ENABLE BURST XMIT /ITMENABLE F ;PLAY ALL SEGMENTS WAIT 1 /ITMPLAY ;ENGAGE 00:00 42:30: PASS END /IDPURAWHEX 1004 ;DISABLE BURST XMIT /ITMENABLE 0 ;STOP FIFO ACTIVITY Start ORBIT CONFIG PROC TAIL SEASON 06:00: BACKUP PASS 01:00 MAG CAL OFF 47:00 MAG CAL ON
7
THEMIS IDPU FSW 6/23/2016 7 UCB P2 ORBIT EVENTS 30:00: SLOW SURVEY MODE /IDPURAWHEX 1005 ;TRIGGER DISABLE /IDPURAWHEX 1003 ;WBURST DISABLE /IDPURAWHEX 1002 ;PBURST DISABLE /IDPURAWHEX 1001 ;SLOW SURVEY /IDPURAWHEX B80F ;COMPRESS ALL 18:00: FAST SURVEY, BURSTING MODE /IDPURAWHEX 1081 ;FAST SURVEY MODE /IDPURAWHEX 1082 ;PBURST ENABLE /IDPURAWHEX 1083 ;WBURST ENABLE /IDPURAWHEX 1085 ;TRIGGER ENABLE 34:00: 100% COMPRESSED Orbit Period : 48 hours Fast Survey : 12 hours Compression: 4 hours 42:00: PASS START /IDPURAWHEX 1084 ;ENABLE BURST XMIT /ITMENABLE F ;PLAY ALL SEGMENTS WAIT 1 /ITMPLAY ;ENGAGE 00:00 42:30: PASS END /IDPURAWHEX 1004 ;DISABLE BURST XMIT /ITMENABLE 0 ;STOP FIFO ACTIVITY TAIL SEASON w/ ECLIPSE 23:00: ECLIPSE ENTRY /ISCRIPTEXEC 90 25:00: ECLIPSE EXIT /ISCRIPTEXEC 91 01:00 MAG CAL OFF 47:00 MAG CAL ON
8
THEMIS IDPU FSW 6/23/2016 8 UCB P2 ORBIT EVENTS 30:00: SLOW SURVEY MODE /IDPURAWHEX 1005 ;TRIGGER DISABLE /IDPURAWHEX 1003 ;WBURST DISABLE /IDPURAWHEX 1002 ;PBURST DISABLE /IDPURAWHEX 1001 ;SLOW SURVEY /IDPURAWHEX B80F ;COMPRESS ALL 18:00: FAST SURVEY, BURSTING MODE /IDPURAWHEX 1081 ;FAST SURVEY MODE /IDPURAWHEX 1082 ;PBURST ENABLE /IDPURAWHEX 1083 ;WBURST ENABLE /IDPURAWHEX 1085 ;TRIGGER ENABLE 34:00: 100% COMPRESSED Orbit Period : 48 hours Fast Survey : 12 hours Compression: 4 hours 42:00: PASS START /IDPURAWHEX 1084 ;ENABLE BURST XMIT /ITMENABLE F ;PLAY ALL SEGMENTS WAIT 1 /ITMPLAY ;ENGAGE 00:00 42:30: PASS END /IDPURAWHEX 1004 ;DISABLE BURST XMIT /ITMENABLE 0 ;STOP FIFO ACTIVITY DAY SEASON 1:10: ECLIPSE EXIT /ISCRIPTEXEC 91 2:00: SOLAR WIND ENTRY /ISCRIPTEXEC 80 46:00: SOLAR WIND EXIT /ISCRIPTEXEC 81 01:00 MAG CAL OFF 47:00 MAG CAL ON 1:00: ECLIPSE ENTRY /ISCRIPTEXEC 90
9
THEMIS IDPU FSW 6/23/2016 9 UCB P2 TAIL PROFILE TEST REM REM IDPU RESET AND CONFIGURE REM /IDPURESET WAIT 12 START C:\IDPU Testing\Scripts\IDPU\IDPU_INIT.CMD REM REM INSTRUMENT POWER ON AND CONFIGURE REM START C:\IDPU Testing\Scripts\IDPU\INST_ON.CMD REM REM LOAD ORBIT CONFIGURATION REM START C:\IDPU Testing\Scripts\IDPU\P2_TAIL_CONFIG.CMD REM REM RUN ORBIT PROFILE REM START C:\IDPU Testing\Scripts\IDPU\P2_TAIL_SIM.CMD
10
THEMIS IDPU FSW 6/23/2016 10 UCB P2 ORBIT CONFIG P2 TAIL Configuration REM REM ENABLE BURST LOGIC TO CONTROL SSR REM DISABLE ALL OTHER OPTIONS FOR INSTRUMENT LOADS REM /IDPURAWHEX 1101;SCIENCE CONTROL ONLY WAIT 1 REM REM CONFIGURE INSTRUMENTS IN SLOW SURVEY MODE REM START C:\IDPU Testing\Scripts\FGM\FGM_RANGES_0.CMD WAIT 4 START C:\IDPU Testing\Scripts\FGM\SN05_Standard_Mode.s WAIT 1 START C:\IDPU Testing\Scripts\SST\SST_ETC_INIT_P2ORBIT.CMD WAIT 1 START c:\IDPU Testing\Scripts\ESA\ESA_ETC_INIT_P2ORBIT.CMD WAIT 1 REM REM ENABLE SST READBACK REM ENABLE SPIN FITS REM /IDPURAWHEX 1087;SCIENCE OPTS /IDPURAWHEX 3807;E&B FITS ENABLED IDPU INIT (FOR TEST) REM REM IDPU LOAD SEGMAP V4 REM UPDATE THE SEGMENT MAP FOR PARTICLES REM /IDPURAWHEX 8503;SURVEY FOR ALL MODES /IDPURAWHEX 9F53; /IDPURAWHEX 9F54; /IDPURAWHEX 9F55; /IDPURAWHEX 9F57; /IDPURAWHEX 9F58; /IDPURAWHEX 9F5A; /IDPURAWHEX 9F5B; /IDPURAWHEX 9F5D; /IDPURAWHEX 9F5E; /IDPURAWHEX 8504;PBURST /IDPURAWHEX 9C56; /IDPURAWHEX 9C59; /IDPURAWHEX 9C5F; /IDPURAWHEX 8500;NULL /IDPURAWHEX 9F5C; WAIT 1 REM REM TEST POINTS REM /IDPUADRH 7F;TESTVALUES = 66/77 /IDPUADRL FB; /IDPULOAD 66; /IDPULOAD 77;
11
THEMIS IDPU FSW 6/23/2016 11 UCB P2 ORBIT SIM P2 Orbit SIM REM =========================================================== REM P2_TAIL_SIM.CMD (48 HOUR PERIOD) REM STARTS / ENDS POST PASS AT 06:30 REM 5/30/06 REM =========================================================== WAIT 41400;06:30 SLOW SURVEY THROUGH TO 18:00 START C:\IDPU Testing\Scripts\MPT\FAST_SURVEY.CMD WAIT 43200;18:00 FAST SURVEY THROUGH TO 30:00 START C:\IDPU Testing\Scripts\MPT\SLOW_SURVEY.CMD /IDPURAWHEX B80F;COMPRESS ALL WAIT 86400;30:00 SLOW SURVEY THROUGH TO 06:00 START C:\IDPU Testing\Scripts\MPT\PASS.CMD
12
THEMIS IDPU FSW 6/23/2016 12 UCB EEPROM Configuration EEPROM CDI Tables (ref thm_efi_beb_tables_revC_.doc ) F5 : B0 - EFI Low Density, Sun F6 : B1 - EFI Low Density, Eclipse F7 : B2 - EFI High Density, Sun F8 : B3 - EFI High Density, Eclipse
13
THEMIS IDPU FSW 6/23/2016 13 UCB SCRIPTS
14
THEMIS IDPU FSW 6/23/2016 14 UCB FGM TM REM =========================================================== REM MAG_CAL_ON.CMD REM 5/30/06 REM =========================================================== /IDPURAWHEX B101;FGE ENABLE /ISCMCAL 60;SCM CAL ON FOR 1 MINUTE REM =========================================================== REM MAG_CAL_ON.CMD REM 5/30/06 REM =========================================================== /IDPURAWHEX B101;FGE ENABLE /ISCMCAL 60;SCM CAL ON FOR 1 MINUTE REM =========================================================== REM MAG_CAL_OFF.CMD REM 5/30/06 REM =========================================================== /IDPURAWHEX B100;FGE DISABLE REM =========================================================== REM MAG_CAL_OFF.CMD REM 5/30/06 REM =========================================================== /IDPURAWHEX B100;FGE DISABLE Attitude Control / Calibration Determine Probe Attitude Near Perigee APID 405 ( 8 Hz x 3 Axes) Enabled at Perigee +/- 1 hour Slow Survey APID 410 X-Y Sine Wave Least Squares Spin Fits & Z-axis Average Fast Survey APID 460 3-Axis 16 bit samples at 4 Samples/Second Particle Burst APID 461 3-Axis 16 bit samples at 128 Samples/Second
15
THEMIS IDPU FSW 6/23/2016 15 UCB FGM RANGING Magnetometer Ranging 1.FGM SIGNAL RANGE RANGE = 0 to 8, Sliding 16-bit Window over 24-bit X,Y,Z Samples Range 0 : FFFFFFFFFFFFFFFFxxxxxxxx+/- 25000 nT range Range 3 : xxxFFFFFFFFFFFFFFFFxxxxx+/- 3125 nT range Range 8 : xxxxxxxxFFFFFFFFFFFFFFFF+/- 97 nT range 2.OVER RANGE IMPACTS APID 460/461: A saturated waveform in the spin plane is relatively recoverable A saturated signal in the spin-axis is deadly. No way to tell where it really is. SPIN FITS: Not recoverable. We lose virtually everything if the signal goes over range. 3.ON-ORBIT MAG RANGE ADJUSTMENT (ATS) BELOW 6 Re : Use Range 0 (+/- 25000 nT) OUTSIDE 6 Re: Use Range 4 (+/- 1563 nT)
16
THEMIS IDPU FSW 6/23/2016 16 UCB SCM TM SCM Calibrations Trend Sensor Health each orbit Calibration Mode for 1 Minute Slow Survey APID 440 Filter Bank at ¼ Hz Fast Survey APID 440 Filter Bank at 4 Hz APID 444 16 bit samples at 8 Samples/Second Particle Burst APID 448 16 bit samples at 128 Samples/Second APID 44D 2 channels 32 freq spectra at 1 spectra/sec Wave Burst APID 44C 16 bit samples at 8192 Samples/Second APID 44E 2 channels 64 freq spectra at 8 spectra/sec
17
THEMIS IDPU FSW 6/23/2016 17 UCB EFI TM Slow Survey APID 410 X-Y Sine Wave Least Squares Spin Fits & Z-axis Average APID 440 Filter Bank at ¼ Hz Fast Survey APID 440 Filter Bank at 4 Hz APID 441 V1-V6 16-bit samples at 4 Samples/Second APID 443 Ex-z 16-bit samples at 8 Samples/Second Particle Burst APID 445 V1-V6 16-bit samples at 16 Samples/Second APID 447 Ex-z 16-bit samples at 128 Samples/Second APID 44D 2 channels 32 freq spectra at 1 spectra/sec Wave Burst APID 449 V1-V6 16-bit samples at 8192 Samples/Second APID 44B Ex-z 16-bit samples at 8192 Samples/Second APID 44E 2 channels 64 freq spectra at 8 spectra/sec
18
THEMIS IDPU FSW 6/23/2016 18 UCB ECLIPSE REM =========================================================== REM ECLIPSE_ENTRY.CMD REM 5/30/06 REM =========================================================== /IDPURAWHEX 14F8;EFI -- ECLIPSE, LOW DENSITY CONFIGURATION /IEFICONF F8; /IDPUADRH XX;ETC -- SET DIRECTORY FOR ETC ECLIPSE /IDPUADRL XX; /IDPULOAD YY; /IDPURAWHEX 6600;ETC -- ECLIPSE MODE REM =========================================================== REM ECLIPSE_ENTRY.CMD REM 5/30/06 REM =========================================================== /IDPURAWHEX 14F8;EFI -- ECLIPSE, LOW DENSITY CONFIGURATION /IEFICONF F8; /IDPUADRH XX;ETC -- SET DIRECTORY FOR ETC ECLIPSE /IDPUADRL XX; /IDPULOAD YY; /IDPURAWHEX 6600;ETC -- ECLIPSE MODE REM =========================================================== REM ECLIPSE_EXIT.CMD REM 5/30/06 REM =========================================================== /IDPURAWHEX 14F6;EFI -- SUN, LOW DENSITY CONFIGURATION /IEFICONF F6; /IDPUADRH XX;ETC -- SET DIRECTORY FOR ETC MAG /IDPUADRL XX; /IDPULOAD YY; /IDPURAWHEX 6600;ETC -- MAGNETOSPHERE MODE REM =========================================================== REM ECLIPSE_EXIT.CMD REM 5/30/06 REM =========================================================== /IDPURAWHEX 14F6;EFI -- SUN, LOW DENSITY CONFIGURATION /IEFICONF F6; /IDPUADRH XX;ETC -- SET DIRECTORY FOR ETC MAG /IDPUADRL XX; /IDPULOAD YY; /IDPURAWHEX 6600;ETC -- MAGNETOSPHERE MODE
19
THEMIS IDPU FSW 6/23/2016 19 UCB SOLAR WIND REM =========================================================== REM SOLAR_WIND_ENTRY.CMD REM 5/30/06 REM =========================================================== /IDPURAWHEX 14F5;EFI -- SUN, HIGH DENSITY CONFIGURATION /IEFICONF F5; /IDPUADRH XX;ETC -- SET DIRECTORY FOR ETC SW /IDPUADRL XX; /IDPULOAD YY; /IDPURAWHEX 6600;ETC -- SOLAR WIND MODE REM =========================================================== REM SOLAR_WIND_ENTRY.CMD REM 5/30/06 REM =========================================================== /IDPURAWHEX 14F5;EFI -- SUN, HIGH DENSITY CONFIGURATION /IEFICONF F5; /IDPUADRH XX;ETC -- SET DIRECTORY FOR ETC SW /IDPUADRL XX; /IDPULOAD YY; /IDPURAWHEX 6600;ETC -- SOLAR WIND MODE REM =========================================================== REM SOLAR_WIND_EXIT.CMD REM 5/30/06 REM =========================================================== /IDPURAWHEX 14F6;EFI -- SUN, LOW DENSITY CONFIGURATION /IEFICONF F6; /IDPUADRH XX;ETC -- SET DIRECTORY FOR ETC MAG /IDPUADRL XX; /IDPULOAD YY; /IDPURAWHEX 6600;ETC -- MAGNETOSPHERE MODE REM =========================================================== REM SOLAR_WIND_EXIT.CMD REM 5/30/06 REM =========================================================== /IDPURAWHEX 14F6;EFI -- SUN, LOW DENSITY CONFIGURATION /IEFICONF F6; /IDPUADRH XX;ETC -- SET DIRECTORY FOR ETC MAG /IDPUADRL XX; /IDPULOAD YY; /IDPURAWHEX 6600;ETC -- MAGNETOSPHERE MODE
20
THEMIS IDPU FSW 6/23/2016 20 UCB RADIATION BELT REM =========================================================== REM RAD_BELT_ENTRY.CMD REM 5/30/06 REM =========================================================== REM SST WOULD LIKE TO BE ATTENUATED REM =========================================================== REM RAD_BELT_ENTRY.CMD REM 5/30/06 REM =========================================================== REM SST WOULD LIKE TO BE ATTENUATED REM =========================================================== REM RAD_BELT_EXIT.CMD REM 5/30/06 REM =========================================================== REM SST WOULD LIKE TO BE AUTOMATIC REM =========================================================== REM RAD_BELT_EXIT.CMD REM 5/30/06 REM =========================================================== REM SST WOULD LIKE TO BE AUTOMATIC
21
THEMIS IDPU FSW 6/23/2016 21 UCB P3 SIM RESULTS Simulated Pass is too short to remove 375 Mb at GSE Rate 5
22
THEMIS IDPU FSW 6/23/2016 22 UCB P3 SIM RESULTS
23
THEMIS IDPU FSW 6/23/2016 23 UCB ISSUES P3 SIMULATION RESULTS and ISSUES 1.Too Much RAW Data Being Generated 453 (MOMENTS) occurring every spin –CANNOT Cut Down the Rate –4-byte Data Instead of 2-bytes, 212 Bytes Every Spin –FSW Compressor/Decimator Needed 451 (TRIGGER) occurring every second –Reformatting to remove filter data (will cut to ¼ volume) in V4.01 –Remove 451 during Slow Survey –Need a budget. What’s a reasonable amount to save and replay? 452 (SST Engineering) –Not accounted in the total data budget (Vassilis’) –Not a whole lot of data, can be cut another factor of 4 or eliminated. 2.Compression Works Well (>2.5 ratio) 3.GSE Does Not Handle Telemetry Fast Enough in 30 minutes to remove 375 Mbits Extend Pass in order to get this done 4.Need Shadow Entry and Exit Scripts 5.Need Solar Wind Entry and Exit Scripts New EEPROM Loads Required to Make EFI, SST and ESA Work in Solar Wind FSW Able to Load from Multiple EEPROM Directories (have not yet tried this!)
24
THEMIS IDPU FSW 6/23/2016 24 UCB PLAN 1.SST/ESA MOMENTS Decimation Specification – Completed and Approved FSW Developed and Test – Completed GSE Software Modification – Jim Lewis Splitter Software Modification – Jim Lewis 2.SST/ESA REFORMATTING (ETC Version 5) New FSW Support to Start New Directories – SST/ESA ReTest – Cannot be Done on ETU
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.