Download presentation
1
CHAPTER 9.10~9.17 Vector Calculus
2
Contents 9.10 Double Integrals
9.11 Double Integrals in Polar Coordinates 9.12 Green’s Theorem 9.13 Surface Integrals 9.14 Stokes’ Theorem 9.15 Triple Integrals 9.16 Divergence Theorem 9.17 Change of Variables in Multiple Integrals
3
9.10 Double Integrals Definition 9.10: Let f be a function of two variables defined on a closed region R. Then the double integral of f over R is given by (1) Integrability: If the limit in (1) exists, we say that f is integrable over R, and R is the region of integration. Area: When f(x,y)=1 on R. Volume: When f(x,y) 0 on R.
4
Properties of Double Integrals
Theorem 9.11: Let f and g be functions of two variables that are integrable over a region R. Then (i) , where k is any constant (ii) (iii) where and
5
Regions of Type I and II Region of Type I See the region in Fig 9.71(a) R: a x b, g1(x) y g2(x) Region of Type II See the region in Fig 9.71(b) R: c y d, h1(y) x h2(y)
6
Fig 9.71
7
Iterated Integral For Type I: (4) For Type II: (5)
8
Let f be continuous on a region R.
(i) For Type I: (6) (ii) For Type II: (7) THEOREM 9.12 Evaluation of Double Integrals
9
Note: Volume = where z = f(x, y) is the surface.
10
Example 1 Evaluate over the region bounded by y = 1, y = 2, y = x, y = −x + 5. See Fig 9.73. Solution The region is Type II
11
Fig 9.73
12
Example 2 Evaluate over the region in the first quadrant bounded by y = x2, x = 0, y = 4. Solution From Fig 9.75(a) , it is of Type I However, this integral can not be computed.
13
Fig 9.75(a) Fig 9.75(b)
14
Example 2 (2) Trying Fig 9.75(b), it is of Type II
15
9.11 Double Integrals in Polar Coordinates
Double Integral Refer to the figure The double integral is
16
Refer to the figure. The double integral is
17
Change of Variables Sometimes we would like to change the rectangular coordinates to polar coordinates for simplifying the question. If and then (3) Recall: x2 + y2 = r2 and
18
Example 2 Evaluate Solution From the graph is shown in Fig Using x2 + y2 = r2, then 1/(5 + x2 + y2 ) = 1/(5 + r2)
19
Fig 9.84
20
Example 2 (2) Thus the integral becomes
21
Example 3 Find the volume of the solid that is under and above the region bounded by x2 + y2 – y = 0. See Fig 9.85. Solution Fig 9.85
22
Example 3 (2) We find that and the equations become and r = sin . Now
23
Example 3 (3)
24
Area If f(r, ) = 1, then the area is
25
9.12 Green’s Theorem Along Simple Closed Curves For different orientations of simple closed curves, please refer to Fig Fig 9.88(a) Fig 9.88(b) Fig 9.88(c)
26
Notations for Integrals Along Simple Closed Curves
We usually write them as the following forms where and represents in the positive and negative directions, respectively.
27
IF P, Q, P/y, Q/x are continuous on R, which is
THEOREM 9.13 IF P, Q, P/y, Q/x are continuous on R, which is bounded by a simply closed curve C, then Green’s Theorem in the Plane Partial Proof For a region R is simultaneously of Type I and Type II,
28
Fig 9.89(a) Fig 9.89(b)
29
Partial Proof Using Fig 9.89(a), we have
30
Partial Proof Similarly, from Fig 9.89(b), From (2) + (3), we get (1).
31
Note: If the curves are more complicated such as Fig 9.90, we can still decompose R into a finite number of subregions which we can deal with. Fig 9.90
32
Example 2 Evaluate where C is the circle (x – 1)2 + (y – 5)2 = 4 shown in Fig 9.92.
33
Example 2 (2) Solution We have P(x, y) = x5 + 3y and then Hence Since the area of this circle is 4, we have
34
Example 3 Find the work done by F = (– 16y + sin x2)i + (4ey + 3x2)j along C shown in Fig 9.93.
35
Example 3 (2) Solution We have Hence from Green’s theorem In view of R, it is better handled in polar coordinates, since R:
36
Example 3 (3)
37
Example 4 The curve is shown in Fig Green’s Theorem is not applicable to the integral since P, Q, P/x, Q/y are not continuous at the region.
38
Fig 9.94
39
Region with Holes Green’s theorem cal also apply to a region with holes. In Fig 9.95(a), we show C consisting of two curves C1 and C2. Now We introduce cross cuts as shown is Fig 9.95(b), R is divided into R1 and R2. By Green’s theorem: (4)
40
Fig 9.95(a) Fig 9.95(b) The last result follows from that fact that the line integrals on the crosscuts cancel each other.
41
Example 5 Evaluate where C = C1 C2 is shown in Fig 9.96.
Solution Because
42
Example 5 (2) are continuous on the region bounded by C, then
43
Fig 9.96
44
Conditions to Simplify the Curves
As shown in Fig 9.97, C1 and C2 are two nonintersecting piecewise smooth simple closed curves that have the same orientation. Suppose that P and Q have continuous first partial derivatives such that P/y = Q/x in the region R bounded between C1 and C2, then we have
45
Fig 9.97
46
Example 6 Evaluate the line integral in Example 4.
Solution We find P = – y / (x2 + y2) and Q = x / (x2 + y2) have continuous first partial derivatives in the region bounded by C and C’. See Fig 9.98.
47
Fig 9.98
48
Example 6 (2) Moreover, we have
49
Example 6 (3) Using x = cos t, y = sin t, 0 t 2 , then
Note: The above result is true for every piecewise smooth simple closed curve C with the origin in its interior.
50
9.13 Surface Integrals DEFINITION 9.11 Let f be a function with continuous first derivatives fx, fy on a closed region. Then the area of the surface z=f(x,y) over R is given by (2) Surface Area
51
Example 1 Find the surface area of portion of x2 + y2 + z2 = a2 and is above the xy-plane and within x2 + y2 = b2, where 0 < b < a. Solution If we define then Thus where R is shown in Fig
52
Fig 9.103
53
Example 1 (2) Change to polar coordinates:
54
Differential of Surface Area
The function is called the differential of surface area.
55
Let G be a function of three variables defined over a
DEFINITION 9.12 Let G be a function of three variables defined over a region of space containing the surface S. Then the surface integral of G over S is given by (4) Surface Integral
56
Method of Evaluation (5) where we define z = f(x, y) to be the equation of S projecting into a region R of the xy-plane.
57
Projection of S Into Other Planes
If we define y = g(x, z) to be the equation of S projecting into a region R of the xz-plane, then (6) Similarly, if x = h(y, z) is the equation of S projecting into a region R of the yz-plane, then (7)
58
Example 3 Evaluate , where S is the portion of y = 2x2 + 1 in the first octant bounded by x = 0, x = 2, z = 4 and z = 8. Solution The projection graph on the xz-plane is shown in Fig
59
Example 3 (2) Let y = g(x, z) = 2x Since gx(x, z) = 4x and gz(x, z) = 0, then
60
Orientable Surface A surface is said to be orientable or an oriented surface if there exists a continuous unit normal vector function n, where n(x, y, z) is called the orientation of the surface. e.g: S is defined by g(x, y, z) = 0, then n = g / ||g|| (9) where is the gradient.
61
Fig
62
Fig 9.107
63
Example 4 Consider x2 + y2 + z2 = a2, a > 0. If we define g(x, y, z) = x2 + y2 + z2 – a2, then Thus the two orientations are where n defines outward orientation, n1 = − n defines inward orientation. See Fig
64
Fig 9.108
65
Computing Flux We have (10) See Fig 9.109. Flux of F through S:
The total volume of a fluid passing through S per unit time.
66
Example 5 Let F(x, y, z) = zj + zk represent the flow of a liquid. Find the flux of F through the surface S given by that portion of the plane z = 6 – 3x – 2y in the first octant oriented upward. Solution Refer to the figure.
67
Example 5 (2) We define g(x, y, z) = 3x + 2y + z – 6 = 0. Then a unit normal vector with a positive k component (it should be upward) is Thus With R the projection of the surface onto the xy-plane, we have
68
9.14 Stokes’ Theorem Vector Form of Green’s Theorem If F(x, y) = P(x, y)i + Q(x, y)j, then Thus, Green’s Theorem can be written as
69
Let S be a piecewise smooth orientable surface bounded
THEOREM 9.14 Let S be a piecewise smooth orientable surface bounded by a piecewise smooth simple closed curve C. Let F(x, y, z) = P(x, y, z)i + Q(x, y, z)j + R(x, y, z)k be a vector field for which P, Q, R, are continuous and have continuous first partial derivatives in a region of 3-space containing S. If C is traversed in the positive direction, then where n is a unit normal to S in the direction of the orientation of S. Stokes’ Theorem
70
Example 1 Let S be the part of the cylinder z = 1 – x2 for 0 x 1, −2 y 2. Verify Stokes’ theorem if F = xyi + yzj + xzk. Fig 9.116
71
Example 1 (2) Solution See Fig Surface Integral: From F = xyi + yzj + xzk, we find
72
Example 1 (3)
73
Example 1 (4)
74
Example 1 (5)
75
9.15 Triple Integrals DEFINITION 9.13 Let F be a function of three variables defined over a Closed region D of 3-space. Then the triple integral of F over D is given by (1) The Triple Integral
76
Evaluation by Iterated Integrals:
See Fig
77
Fig 9.123
78
Example 1 Find the volume of the solid in the first octant bounded by z = 1 – y2, y = 2x and x = 3. Fig 9.125(a) Fig 9.125(b)
79
Example 1 (2) Solution Referring to Fig 9.125(a), the first integration with respect to z is from 0 to 1 – y2. From Fig 9.125(b), we see that the projection of D in the xy-plane is a region of Type II. Hence
80
Cylindrical Coordinates
Refer to Fig
81
Conversion of Cylindrical Coordinates to Rectangular Coordinates
The relationship between the cylindrical coordinates (r, , z) and rectangular coordinates (x, y, z): x = r cos , y = r sin , z = z (3)
82
Example 1 Convert (8, /3, 7) in cylindrical coordinates to rectangular coordinates. Solution From (3)
83
Conversion of Rectangular Coordinates to Cylindrical Coordinates
Also we have
84
Example 4 Solution
85
Fig 9.128
86
Triple Integrals in Cylindrical Coordinates
See Fig We have
87
Fig 9.129
88
Spherical Coordinates
See Fig
89
Conversion of Spherical Coordinates to Rectangular and Cylindrical Coordinates
90
Example 6 Convert (6, /4, /3) in spherical coordinates to rectangular and cylindrical coordinates. Solution
91
Inverse Conversion
92
Triple Integrals in Spherical Coordinates
See Fig
93
We have
94
9.16 Divergence Theorem Another Vector Form of Green’s Theorem Let F(x, y) = P(x, y)i + Q(x, y)j be a vector field, and let T = (dx/ds)i + (dy/ds)j be a unit tangent to a simple closed plane curve C. If n = (dy/ds)i – (dx/ds)j is a unit normal to C, then
95
that is, The result in (1) is a special case of the divergence or Gauss’ theorem.
96
Let D be a closed and bounded region in 3-space with
THEOREM 9.15 Let D be a closed and bounded region in 3-space with a piecewise smooth boundary S that is oriented outward. Let F(x, y, z) = P(x, y, z)i + Q(x, y, z)j + R(x, y, z)k be a vector field for which P, Q, and R are continuous and have continuous first partial derivatives in a region of 3-space containing D. Then (2) Divergence Theorem
97
Example 1 Let D be the region bounded by the hemisphere
Solution The closed region is shown in Fig
98
Fig 9.140
99
Example 1 (2) Triple Integral: Since F = xi + yj + (z-1)k, we see div F = 3. Hence (10) Surface Integral: We write S = S1 + S2, where S1 is the hemisphere and S2 is the plane z = 1. If S1 is a level surfaces of g(x, y) = x2 + y2 + (z – 1)2, then a unit outer normal is
100
Example 1 (3)
101
Example 1 (4)
102
9.17 Change of Variables in Multiple Integrals
Introduction If f (x) is continuous on [a, b], then if x = g(u) and dx = g(u) du, we have where c = g(a), d = g(b). If we write J(u) = dx/du, then we have
103
Double Integrals If we have x= f(u, v), y = g(u, v) (3) we expect that a change of variables would take the form where S is the region in the uv-plane, and R is the region in the xy-plane. J(u,v) is some function obtained from the partial derivatives of the equation in (3).
104
Example 1 Find the image of the region S shown in Fig 9.146(a) under the transformations x = u2 + v2, y = u2 − v2. Solution Fig 9.146(a) Fig 9.146(b)
105
Example 1 (2)
106
Some of the Assumptions
The functions f, g have continuous first partial derivatives on S. The transformation is one-to-one. Each of region R and S consists of a piecewise smooth simple closed curve and its interior. The following determinant is not zero on S.
107
Equation (7) is called the Jacobian of the transformation T:S R and is denoted by (x, y)/(u, v). Similarly, the inverse transformation of T is denoted by T-1. See Fig
108
If it is possible to solve (3) for u, v in terms of x, y, then we have
u = h(x,y), v = k(x,y) (8) The Jacobian of T-1 is
109
Example 2 The Jacobian of the transformation x = r cos , y = r sin is
110
If F is continuous on R, then (11)
THEOREM 9.6 If F is continuous on R, then (11) Change of Variables in a Double Integral
111
Example 3 Evaluate over the region R in Fig 9.148(a).
Fig 9.148(a) Fig 9.148(b)
112
Example 3 (2) Solution We start by letting u = x + 2y, v = x – 2y.
113
Example 3 (3) The Jacobian matrix is
114
Example 3 (4) Thus
115
Example 4 Evaluate over the region R in Fig 9.149(a) Fig 9.149(a) Fig 9.149(b)
116
Example 4 (2) Solution The equations of the boundaries of R suggest u = y/x2, v = xy (12) The four boundaries of the region R become u = 1, u = 4, v = 1, v = 5. See Fig 9.149(b). The Jacobian matrix is
117
Example 4 (3) Hence
118
Triple Integrals Let x = f(u, v, w), y = g(u, v, w), z = h(u, v, w) be a one-to-one transformation T from a region E in the uvw-space to a region in D in xyz-space. If F is continuous in D, then
120
Thank You !
121
Quiz (2) 1. (40%) (i) Find the level surface of passing through (1,1,1). (ii) Derive the equation of the tangent plane to the above level surface at (1,1,1). (iii) Find the unit vector such that the directional derivative of in at (1,1,1) achieves the minimum value among all possible . 2. (30%) Let the curve C be represented by i j, , where and Let , please compute (i) , (ii) , and (iii)
122
1.(10%)(i) F(1,1,1)= = -2 (15%)(ii) = 2xi - 8yj + 2zk 2(x-1)+(-8)(y-1)+2(z-1)=0 2x-2-8y+8+2z-2=0 The tangent plane equation is 2x-8y+2z+4=0
123
(iii)(15%)
124
2. r(t) = x(t) i + y(t) j , x(t) = 2cost, y(t) = 2sint
dx = -2sint dt dy = 2cost dt = -2[1-(-1)] = -4 (10%) = 2[0-0] = 0 (10%) (10%)
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.