1. Introduction to ANSYS 6.0 Part 1 Workshop Supplement

2. Inventory Number: 001570 First Edition ANSYS Release: 6.0 Published Date: October 30, 2001 Registered Trademarks: ANSYS® is a registered trademark of SAS IP Inc. All other product names mentioned in this manual are trademarks or registered trademarks of their respective manufacturers. Disclaimer Notice: This document has been reviewed and approved in accordance with the ANSYS, Inc. Documentation Review and Approval Procedures. “This ANSYS Inc. software product (the Program) and program documentation (Documentation) are furnished by ANSYS, Inc. under an ANSYS Software License Agreement that contains provisions concerning non-disclosure, copying, length and nature of use, warranties, disclaimers and remedies, and other provisions. The Program and Documentation may be used or copied only in accordance with the terms of that License Agreement.” Copyright © 2001 SAS IP, Inc. Proprietary data. Unauthorized use, distribution, or duplication is prohibited. All Rights Reserved. Workshop Supplement Introduction to ANSYS 6.0 - Part 1

3. Workshop Supplement October 30, 2001 Inventory #001570 TOC-3 Table of Contents 1.Introduction No workshop. 2.FEA and ANSYS No workshop. 3.ANSYS Basics A. Introductory WorkshopW3-1 B. SiloW3-8 C. Impeller ExtrusionW3-23 4.General Analysis Procedure No workshop 5.Creating the Solid Model A. IGESW5-3 B.SATW5-6 C.SAT AssemblyW5-9 D.ParasolidW5-14 E.Parasolid AssemblyW5-17 F.Pillow Block W5-23 G.Connecting Rod - Bottom-UpW5-37 H.Connecting Rod - Import/Clean-upW5-55 6.Creating the Finite Element Model A. Pillow BlockW6-1 B. Connecting RodW6-9 C. Cotter PinW6-17 D. WheelW6-23 7.Defining the Material No workshop. 8.Loading No workshop 9.Solution A.3-D BracketW9-1 B.Connecting RodW9-9 C.WheelW9-16 10.Structural Analysis A. Lathe CutterW10-1 B.2-D Corner Bracket TutorialW10-27 11.Thermal Analysis A. Axisymmetric Pipe with FinsW11-1 12.Coupled-field Analysis A. Axisymm. Pipe w/ Fins - SequentialW12-1 B. Axisymm. Pipe w/ Fins - Directw12-18 13.Postprocessing A.Connecting RodW13-1 B.Spherical ShellW13-22 C.Axisymmetric Fin with Multiple Load StepsW13-37 D.Results ViewerW13-56 E.Report GeneratorW13-64 14.Short Topics A. *ABBR - Plate with Hole at CenterW14-1 B. 2-D Bracket using ParametersW14-6 15.Appendix A Input Files for Workshop ExercisesW15-1 * All workshops were run and verified using ANSYS 6.0

4. Workshop Supplement October 30, 2001 Inventory #001570 TOC-4