1. Import existing part with drawing
NX Manager
Import existing part with drawing

2. File -> Import Assembly into Teamcenter…

3. Change load options as necessary

4. Click ‘Add Part’, browse to the part file; repeat for drawing file
Use ‘Add Assembly’ for assembly files, components will be added automatically
Use ‘Add Part’ to add drawing files of components as needed

5. Change to the numbering tab
‘Import Numbering’ should be set to ‘User Number’

6. Assign revision, 01 will be assigned automatically if the part does not already exist in TC
Part type is ‘Item’
Part File Type is ‘Master’

7. Change attribute values as necessary (press enter to update change)

8. For a drawing: part type is ‘Item’
Delete “_dwg” from part number (this should be the name of the part file the drawing references)
Assign part revision
Part file type is ‘Specification’
Enter part file name <part>_dwg
Press OK

9. Check ‘Dry Run’
Press ‘Execute’ to list what actions will be taken

10. If output looks ok, uncheck ‘Dry Run’ and press ‘Execute’

11. Part file and drawing will be added to the same container
Item will appear in location you specified