1. A new Profiler product

2. Profino Multi Channel Programmable Filter - Amplifier Designed for both digital and analogue channels

3. 4 inputs  4 inputs : B I-FM, B III / DAB and 2 UHF inputs splitted over 5 UHF programmable clusters  UHF clusters can have 1 to 7 channels bandwidth  B III/ DAB input with 1 or 4 channels bandwidth filter  BI-FM input for B I or FM or B I + FM  High selectivity filters  Low noise and high gain split band amplifiers  Selectable remote power on B III and UHF inputs

4. Outputs Test Output -30 dB Output DSUB9 Connector “Copy” function in order to transfer all settings from one unit to another reducing time of installation

5. Description

6. Operation Easy programming All parameters are set with the rotary push button. Each function and parameters are shown on 2 digits display and different LED ’ s.

7. 4 inputsOperation Push on the rotary button for more than 3 seconds to enter into the programming mode

8. Programming Turn the button to select the desired mode - the LED is green Push the button to enter the selected mode - the LED is red Inside the mode, turn the button to select the parameter (input, cluster, channels, level...) Push the rotary button to confirm

9. Security code Unit can be locked by security code Free access to programming mode or access to programming mode with Security code “ 50 ”

10. Cluster programming Setting clusters / UHF input The amplifier has 2 UHF inputs which are splitted over 5 clusters There are 3 possible configurations: 5-0 4-1 3-2

11. Setting channels / cluster Each UHF cluster has a bandwidth which can be programmed from 1 to 7 channels Cluster programming START CHANNEL STOP CHANNEL

12. Input BI-FM can be programmed for BI, FM or BI+FM B III/ DAB input has 1 or 4 channels bandwidth filter Cluster programming Ch 05 to 12 for the “ B/G ” standard L5 to L10 for the “ L ” standard

13. Level adjustment Attenuators with 1 dB step for accurate equalization BI-FM Attenuator is 20 dB BIII / DAB and UHF is 30 dB

14. Level adjustment High UHF input levels up to 105 dBµV by switchable 20 dB input amplifier

15. DC remote power Unit can power 12 or 24 volt outdoor preamplifiers on BIII / DAB and UHF inputs

16. Copy function All settings from one unit to another unit Copy from Memory Stick (ref. 6604 optional)

17. Block diagram

18. Technical specifications

19. Unitron nv Frankrijklaan 27 - 8970 Poperinge - Belgium Tel.: ++32(0)57 33 33 63 - Fax: ++32(0)57 33 45 24 E-mail: sales@johansson.be www.johansson.be