Download presentation
Presentation is loading. Please wait.
Published bySusan Collins Modified over 8 years ago
1
Date of download: 6/24/2016 Copyright © ASME. All rights reserved. From: Characterization of “Bulk Lithography” Process for Fabrication of Three-Dimensional Microstructures J. Micro Nano-Manuf. 2013;1(4):041002-041002-8. doi:10.1115/1.4025461 Schematic representations of (a) CAD model slicing strategy in bulk lithography and (b) cured depth experimental setup and 3D microfabrication using bulk lithography [19] Figure Legend:
2
Date of download: 6/24/2016 Copyright © ASME. All rights reserved. From: Characterization of “Bulk Lithography” Process for Fabrication of Three-Dimensional Microstructures J. Micro Nano-Manuf. 2013;1(4):041002-041002-8. doi:10.1115/1.4025461 Experimental results of dimensionless cured depth against dimensionless energy at constant duration (s) of exposure for TMPTA- based resin (a) under lower energy exposure and comparison with published results and (b) under wide range of energy exposure [19] Figure Legend:
3
Date of download: 6/24/2016 Copyright © ASME. All rights reserved. From: Characterization of “Bulk Lithography” Process for Fabrication of Three-Dimensional Microstructures J. Micro Nano-Manuf. 2013;1(4):041002-041002-8. doi:10.1115/1.4025461 Experimental results of dimensionless cured depth against dimensionless energy at constant duration (s) of exposure along with proposed cure depth model: (a) resin, TMPTA and (b) resin, HDDA Figure Legend:
4
Date of download: 6/24/2016 Copyright © ASME. All rights reserved. From: Characterization of “Bulk Lithography” Process for Fabrication of Three-Dimensional Microstructures J. Micro Nano-Manuf. 2013;1(4):041002-041002-8. doi:10.1115/1.4025461 Variation of parameter “a” and “b” against exposure time for TMPTA-based resin Figure Legend:
5
Date of download: 6/24/2016 Copyright © ASME. All rights reserved. From: Characterization of “Bulk Lithography” Process for Fabrication of Three-Dimensional Microstructures J. Micro Nano-Manuf. 2013;1(4):041002-041002-8. doi:10.1115/1.4025461 SEM image of lateral surface of the 3D microstructure fabricated using conventional scanning MSL Figure Legend:
6
Date of download: 6/24/2016 Copyright © ASME. All rights reserved. From: Characterization of “Bulk Lithography” Process for Fabrication of Three-Dimensional Microstructures J. Micro Nano-Manuf. 2013;1(4):041002-041002-8. doi:10.1115/1.4025461 SEM image of the variable depth microstructure (sine wave) using bulk lithography corresponding to (a) regime I and (b) regime II Figure Legend:
7
Date of download: 6/24/2016 Copyright © ASME. All rights reserved. From: Characterization of “Bulk Lithography” Process for Fabrication of Three-Dimensional Microstructures J. Micro Nano-Manuf. 2013;1(4):041002-041002-8. doi:10.1115/1.4025461 Fabrication of microstructure having variable cured depth along radial direction Figure Legend:
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.