1. 3D-PRINTING FOR DUMMIES; A CRASH COURSE

2. WORKFLOW 3D-modell*.stl Repetier- host SlicePrint!*.gCodePronterfacePrint!

3. INVENTOR 2D-Sketch in chosen plane Extrude (additive/subtractive, etc) Repeat! Modular! Small parts Can assembly parts in an assembly file to see the finished product before printing.

4. 3D-MODEL Overhang Bridges Holes Tend to get smaller

5. PRINTING Plastic wire is melted in extruder and placed at desired position Check/set temp on plate and extruder Glue (for wood) + water Big bottom surface = hard to remove! Can soak in water if difficult. Remove bottom plate, let cool Remove part Repeat