Presentation is loading. Please wait.

Presentation is loading. Please wait.

Characteristics of Instrumentation An instrument is a device that transforms a physical variable of interest (the measurand) into a form that is suitable.

Published byRoss Jones Modified over 8 years ago

Similar presentations

Presentation on theme: "Characteristics of Instrumentation An instrument is a device that transforms a physical variable of interest (the measurand) into a form that is suitable."— Presentation transcript:

1 Characteristics of Instrumentation An instrument is a device that transforms a physical variable of interest (the measurand) into a form that is suitable for recording (the measurement). basic instrument is a ruler measurand number of units

2 Simple Instrument Model measurand sensorr measurementSignal variable Physical Measurement Variable display Physical Process x S

3 Common physical Typical signal variables Force Voltage Length Displacement Temperature Current Acceleration Force Velocity Pressure Pressure Light Frequency Frequency Capacity Resistance Time …

4 Instrument model with amplifier, analog to digital converter, and computer output.

Download ppt "Characteristics of Instrumentation An instrument is a device that transforms a physical variable of interest (the measurand) into a form that is suitable."

Similar presentations

Lecture 4: Signal Conditioning

Lecture 4: Signal Conditioning
By: Engr. Irfan Ahmed Halepoto Assistant Professor, Deptt: Electronics Engg. LECTURE#02 Basics of instrumentation & Measurement systems AUTOMATION & ROBOTICS.

By: Engr. Irfan Ahmed Halepoto Assistant Professor, Deptt: Electronics Engg. LECTURE#02 Basics of instrumentation & Measurement systems AUTOMATION & ROBOTICS.
Measurements Measurement of Pressure Part 2d: Measurement of Pressure 1Process Instrumentation Lecture NotesMay-15.

Measurements Measurement of Pressure Part 2d: Measurement of Pressure 1Process Instrumentation Lecture NotesMay-15.
CHAPTER 3 Measurement Systems with Electrical Signals

CHAPTER 3 Measurement Systems with Electrical Signals
Learning Objectives Static and Dynamic Characteristics of Signals

Learning Objectives Static and Dynamic Characteristics of Signals
Data Acquisition Risanuri Hidayat.

Data Acquisition Risanuri Hidayat.
Presented by- Md. Bashir Uddin Roll: 1215502 Dept. of BME KUET, Khulna-9203.

Presented by- Md. Bashir Uddin Roll: Dept. of BME KUET, Khulna-9203.
Module 4: Analog programming blocks. Module Objectives Analyze a control task that uses analog inputs. Connect a potentiometer to LOGO! controller and.

Module 4: Analog programming blocks. Module Objectives Analyze a control task that uses analog inputs. Connect a potentiometer to LOGO! controller and.
Analog Sensing 101 WITH P14452. Agenda  Analog Signal Characteristics  Common Problems with A/D Conversion  Clipping  Small Signals  Aliasing  Analog.

Analog Sensing 101 WITH P Agenda  Analog Signal Characteristics  Common Problems with A/D Conversion  Clipping  Small Signals  Aliasing  Analog.
GENERALIZED MEASURING SYSTEM Stage 1:A detector- transducing or sensor-transducer stage Stage 2: An intermediate stage, which is called the signal conditioning.

GENERALIZED MEASURING SYSTEM Stage 1:A detector- transducing or sensor-transducer stage Stage 2: An intermediate stage, which is called the signal conditioning.
Lecture 31 Electrical Instrumentation. Lecture 32 Electrical Instrumentation Electrical instrumentation is the process of acquiring data about one or.

Lecture 31 Electrical Instrumentation. Lecture 32 Electrical Instrumentation Electrical instrumentation is the process of acquiring data about one or.
Lecture161 Instrumentation Prof. Phillips March 14, 2003.

Lecture161 Instrumentation Prof. Phillips March 14, 2003.
Instrumentation System  A Measuring system is required to compare a quantity with a standard or to provide an output that can be related to the quantity.

Instrumentation System  A Measuring system is required to compare a quantity with a standard or to provide an output that can be related to the quantity.
UBI >> Contents Chapter 9 Data Acquisition Introduction MSP430 Teaching Materials Texas Instruments Incorporated University of Beira Interior (PT) Pedro.

UBI >> Contents Chapter 9 Data Acquisition Introduction MSP430 Teaching Materials Texas Instruments Incorporated University of Beira Interior (PT) Pedro.
Chapter One Characteristics of Instrumentation بسم الله الرحمن الرحيم.

Chapter One Characteristics of Instrumentation بسم الله الرحمن الرحيم.
EKT314/4 Electronic Instrumentation

EKT314/4 Electronic Instrumentation
Topic 1 different attributes that characterize sensors ETEC 6405.

Topic 1 different attributes that characterize sensors ETEC 6405.
gradually rises from 0 to 9V immediately drops from 9V to 0V

gradually rises from 0 to 9V immediately drops from 9V to 0V
SENSORS MEETING THE NEEDS OF THE DAY  A device which converts energy or information in one form to another  In other words, a device which provides.

SENSORS MEETING THE NEEDS OF THE DAY  A device which converts energy or information in one form to another  In other words, a device which provides.
Transducers/Sensors Transducer/sensor converts a non- electrical quantity, measurand, into a related electrical output signal Ideally there is a linear.

Transducers/Sensors Transducer/sensor converts a non- electrical quantity, measurand, into a related electrical output signal Ideally there is a linear.

Similar presentations

Ads by Google